3d printable enclosure for https://github.com/okyeron/neotrellis-monome/
Warning!! Because this enclosure is printed in two parts, it will not have the stiffness or stability of a laser cut enclosure. I'm providing these files for folks that have easy access to a 3d printer.
Additional warning the "full" versions here are untested because I don't have a printer to test them on. These are even more at your own risk than the other ones.
Item | Quantity |
---|---|
m2 Heatset inserts, internal depth 4mm | 10 |
m2 x 16mm screw | 8 |
m2 x 6mm screw | 4 |
m2 nut | 2 |
pi pico | 1 |
bumpers | 4 |
- place inserts in the outer 4 holes of each faceplate half
- the dovetail in the center may be a bit tricky to push together if your printers tolerances are loose. Try filing down one side or the other to give you some wiggle room