- About
- Installation
- Dependencies
- TODO
- Supported Devices
- Banana
RouterProxy is a web-based perl-driven management tool specifically designed for Cisco, Juniper, and several TL1-based devices. Command output may be retrieved from the remote device in its raw form, or if supported (Juniper and TL1 devices) an easy to read tabular form using the available menu commands. Both telnet and SSH protocols are supported, as well as JUNOScript for Juniper devices. Router Proxy requires Javascript to be enabled and utilizes AJAX technology to send and receive command input/output.
IMPORTANT First and foremost, you will almost certainly want to configure Apache to have an alias for each Router Proxy supported pointing to the webroot folder of Router Proxy.
Router Proxy itself must be configured. An example configuration file (config.xml) is provided in the /etc/grnoc/routerproxy/ with instances for every supported device. Enabled commands are also specified for every type of device--users may only issue commands with these prefixes. You can add or remove commands as you wish.
Starting from version 1.7.4, the location of the configuration file for each Router Proxy is acquired by mapping with the url using the mappings file named routerproxy_mappings.xml. An example is provided in /etc/grnoc/routerproxy/. The absolute paths must be used for the mapping and shouldn't be in a web accessible folder for all to see. This would easily allow someone to discover all of the passwords to the devices you have configured for your Router Proxy installation.
If you wish to change the appearance of Router Proxy, feel free to edit the webroot/style.css cascading style sheet to better suit your needs.
Router Proxy needs an Apache installation with CGI/Perl support. Additionally the following Perl modules need to be installed as well (generally easily done with cpan).
- JUNOS::Device / junoscript (see http://www.juniper.net/support/xml/junoscript/index.html) (NOTE: This is now only required for the menu based commands.. if you don't have it installed, RouterProxy will still work).
- CGI
- CGI::Ajax
- XML::Simple
- Encode
- Expect
- Time::ParseDate
- Date::Calc
- GRNOC::TL1
These modules have several dependencies of their own, so make sure they are installed as well.
- IOS Menu Commands?
- Force10 Menu Commands?
- HP Menu Commands?
- Telnet support for IOS XR, Force10, HP (currently does not work).
The following list of devices is supported by Router Proxy with their corresponding 'type' as specified in the config.xml file:
- Cisco IOS ios IOS, doesn't work with IOS XR (CRS etc.)
- Cisco IOS 2xxx ios2 Use this for C2950 or similar device (layer 2)
- Cisco IOS 6509 ios6509 Same as ios, shows up as LAN device on webpage
- Cisco IOS XR iosxr use for CRS or 7000+ devices
- Cisco NX-OS nx-os Cisco NX-OS devices
- Cisco ONS 15454 ons15454 Cisco ONS 15454
- Juniper JUNOS junos Any JunOS device
- Nortel HDXc hdxc
- Nortel OME ome
- Ciena Core Director ciena
- HP ProCurve hp Any HP Switch
- Force10 force10
- Brocade brocade
🍌