Port: A frontend for data donation

Port is a research tool that enables individuals to donate their digital trace data for academic research in a secure, transparent, and privacy-preserving way.

Data donation allows researchers to invite participants to share their data download packages (DDPs). A major challenge is however that DDPs potentially contain very sensitive data, and often not all data is needed to answer the specific research question under investigation. To circumvent these challenges, an alternative framework was developed:

The research participant requests their personal DDP at the platform of interest.
They download it onto their own personal device.
By means of local processing, only the features of interest to the researcher are extracted from that DDP.
The participant inspects the extracted features after which they can consent (or decline) to donate.

To allow for the local processing (step 3) to take place, we developed the software Port. Port creates a frontend that guides participants through the data donation steps.

Port is open-source and allows for researchers to fully configure their own data donation study.

Note: Port is only a frontend. In order for it to be used in a live study, it needs to be hosted with a server and integrate with a solution to store and retrieve the donated data. This repository will discuss a some readily available options.

Installation

In order to start a local instance of Port go through the following steps:

Pre-requisites
- Fork or clone this repo
- Install Node.js
- Install Python and Poetry
Install dependencies:
```
cd ./port
npm install
```
Start the local web server (with hotloading enabled):
```
npm run watch
```
You can now go to the browser: http://localhost:3000.

If the installation went correctly you should be greeted with a mock data donation study.

How to use Port

A researcher can implement their own data donation flow by writing a Python script. The Python scripts has 2 main functions:

It determines the data donation flow. i.e. what screens (for example a file prompt) does the participant gets to see and when. You can use the Port API (props.py) for this.
It determines what data gets extract from the participants submission. Here is were Python really shines, you can use most data extraction methods you are familiar with! (As long as it's available in Pyodide)

A typical script includes the following steps:

Prompt the participant to submit a file
Handling the submission from step 1. This is the step where you can extract the data you are interested in.
The extracted data is presented on screen accompanied with a consent button. After consent is given, the data is sent to a storage location of the researcher.

A example such a script is included in this repo: script.py. We recommend you use that script as starting point for your own data donation study. You can find another example of such a script in this repository.

Port API examples

Below you can find examples on how to use the Port API in your script.py

Main function

Every `script.py` should have this function:

def process(sessionId):

This function is a generator of commands by using yield statements. No return statements should be used.

def process(sessionId):
    result1 = yield CommandUIRender(page1)
    result2 = yield CommandUIRender(page2)
    # last yield should not expect a result
    yield CommandUIRender(page3)

ScriptWrapper and py_worker using send to iterate over the commands one by one. For more information on yield and Generators: https://realpython.com/introduction-to-python-generators

API imports

from port.api.props as props
from port.api.commands import (CommandUIRender, CommandUIDonate)

Create file input

platform = "Twitter"
progress = 25

file_input_description = props.Translatable({
    "en": f"Please follow the download instructions and choose the file that you stored on your device. Click “Skip” at the right bottom, if you do not have a {platform} file. ",
    "nl": f"Volg de download instructies en kies het bestand dat u opgeslagen heeft op uw apparaat. Als u geen {platform} bestand heeft klik dan op “Overslaan” rechts onder."
})
allowed_extensions = "application/zip, text/plain"
file_input = props.PropsUIPromptFileInput(file_input_description, allowed_extensions)

Create a consent page

import pandas as pd

table1_title = props.Translatable({
    "en": "Title 1",
    "nl": "Titel 1"
})
table1_data = pd.DataFrame(data, columns=["columnX", "columnY", "columnZ"])
table1 = props.PropsUIPromptConsentFormTable("table_1", table1_title, table1_data)

table2_title = props.Translatable({
    "en": "Title 2",
    "nl": "Titel 2"
})
table2_data = pd.DataFrame(data, columns=["columnA", "columnB", "columnC", "columnD"])
table2 = props.PropsUIPromptConsentFormTable("table_2", table2_title, table2_data)

tables = [table1, table1]
# Meta tables currently not supported
meta_tables = []

consent_form = props.PropsUIPromptConsentForm(tables, meta_tables)

Create donation page

header = props.PropsUIHeader(title)
footer = props.PropsUIFooter(progress)
body = props.PropsUIPromptFileInput(file_input_description, allowed_extensions)
page = props.PropsUIPageDonation(platform, header, body, footer)

Create page with radio buttons

header = props.PropsUIHeader(title)
footer = props.PropsUIFooter(progress)
body = props.PropsUIPromptRadioInput(title, description, [{"id": 0, "value": "Selection 1"}, {"id": 1, "value": "Selection 2"}])
page = props.PropsUIPageDonation(platform, header, body, footer)

Handling the result from a file input

page = props.PropsUIPageDonation(platform, header, file_input, footer)
result = yield CommandUIRender(page)

# Result is a dictionary (Payload)
if result.__type__ == "PayloadString":
    # File selected
    filename = result.value
    zipfile = zipfile.ZipFile(filename)

    # Extract the data you are interested contained in zipfile
    # Typically you will use your own written functions here
    ...
else:
    # No file selected

Handling consent result

platform = "Twitter"
donation_key = f"{sessionId}-{platform}" 
page = props.PropsUIPageDonation(platform, header, consent_form, footer)
result = yield CommandUIRender(page)

# Response is a dictionary (Payload)
if result.__type__ == "PayloadJSON":
    # User gave consent
    yield CommandSystemDonate(donation_key, result.value)
else:
    # User declined or skipped

Track user behaviour

tracking_key = f"{sessionId}-tracking" 
data = "any json string"

# Use the donate command to store tracking data
yield CommandSystemDonate(tracking_key, data)

Use Port in a data donation study

Port is a frontend it creates the app that participants will end up interacting with: it determines the data donation flow and extraction logic. If you want to use Port in a data dontion study it needs to be hosted by a server an needs a way of storing donated data.

In order to do a data donation study with Port you have several options:

Port + Next on the Azure Cloud (Recommended)

Create production code
```
npm run prod:clean && npm run prod:build
```
The production code can now be found in the dist folder.
Run Port on top of Next on the Azure cloud.

For instructions on running Next + Port see: https://github.com/eyra/mono/blob/d3i/latest/PORT.md

Port + Portserver (Not recommended)

Create production code
```
npm run prod:clean && npm run prod:build
```
The production code can now be found in the dist folder.
Run Port with Portserver.

This is a fairly minimal and cloud agnostic implementation of a server that can serve Port (just like Next it uses Elixir and Phoenix). It uses a database for storing donated data.

Data donation as a service

Data donation very interesting but sounds like way too much work? Feel free to contact Eyra.

Implement your own server for Port

You can also implement your own server for Port. If you want to use your own server solution, please check out these instuctions below:

Add Port app as dependency

Make sure to link your forked Port app as a dependency in your web server code. If `npm` is your dependency manager, add a dependency in `package.json` as follows:

"dependencies": {
    "port": "github:<your_organisation>/port",
},

And resolve dependencies:

npm install

Import code from Port dist folder

import Assembly from "port/dist/framework/assembly";
import Worker from "port/dist/framework/processing/py_worker.js";

import "port/dist/port-0.0.0-py3-none-any.whl";
import "port/dist/styles.css";

In this example above imports can be resolved by Webpack (worker-loader, css-loader, and file-loader). Make sure to include the correct config in your webpack.config.js:

module: {
    rules: [
        {
            test: /worker\.js$/,
            use: { loader: "worker-loader" },
        },
        {
            test: /\.css$/,
            use: [MiniCssExtractPlugin.loader, "css-loader", "postcss-loader"],
        },
        {
            test: /\.whl$/,
            use: [
            {
                loader: "file-loader",
                options: { name: "[name].[ext]", outputPath: "../" },
                },
            ],
        },
    ]
}

Implement System callback interface

// Typescript example
import { CommandSystem, CommandSystemDonate, isCommandSystemDonate } from 'port/dist/framework/types/commands'
import { System } from 'port/dist/framework/types/modules'

export default class MySystem implements System {
    send (command: CommandSystem): void {
        if (isCommandSystemDonate(command)) {
            this.handleDonation(command)
        } else {
            console.log('[LocalSystem] received unknown command: ' + JSON.stringify(command))
        }
    } 

    handleDonation (command: CommandSystemDonate): void {
        console.log(`[LocalSystem] received donation: ${command.key}=${command.json_string}`)
    }
}

Implement start donation session

// Typescript example
import MySystem from "my_system.ts";
import Assembly from "port/dist/framework/assembly";
import Worker from "port/dist/framework/processing/py_worker.js";

import "port/dist/port-0.0.0-py3-none-any.whl";
import "port/dist/styles.css";

const locale = 'en' // preferred locale
const parent = 'parent_id' // parent DOM element id

const worker = new Worker();
const system = new MySystem();
const container = document.getElementById(parent);

this.assembly = new Assembly(worker, system);
this.assembly.visualisationEngine.start(container, locale);
this.assembly.processingEngine.start();

Workers can not be reused over sessions. Re-run code above for every new donation session.

Technical details of Port

You can use Port as is, but if your study has demand for something you are free to change the way Port works. Luckily Port is customizable, is this something you want? Use these technical details to your advantage.

Data model

Port uses the following data model (also see: src/framework/types)

Modules

Module	Description
ProcessingEngine	Responsible for processing donation flows
VisualizationEngine	Responsible for presenting the UI and accepting user input
CommandHandler	Decoupling of ProcessingEngine and VisualizationEngine
System	Callback interface for System Commands (e.g. Donation)

Pages

Page	Description
SplashScreen	First page that is rendered before the Python script is loaded with GDPR consent logic
Donation	Page that uses several prompts to get a file from the user and consent to donate the extracted data
End	Final page with instructions on how to continue

Prompts

Prompt	Description
FileInput	File selection
RadioInput	Multiple choice question
ConsentForm	Displays extracted data in tables and asks for user consent
Confirm	General dialog to ask for extra confirmation

Commands

Command Description

Render Render the page

Donate Save the extracted data

Commands can be send from the Python script using the yield keyword.

Command	Description
Render	Render the page
Donate	Save the extracted data

Payloads

Payload	Description
Void	Command without user input as a response
True	Positive user input (e.g. Ok button in confirm prompt)
False	Negative user input (e.g. Cancel button in confirm prompt)
Error	Unexpected problem when handling command
String	String result
File	Only used in Javascript. This is intercepted in py_worker.js and translated into a String (filename), while the bytes of the file are written to the Pyodide file system
JSON	User input structured as JSON, used to return the consent data from the consent form

Payloads are part of a Response back to the Python script after sending commands:

export interface Response {
    __type__: 'Response'
    command: Command
    payload: Payload
}

Responses are intercepted in py_worker.js and only the payload is returned to the Python script. Payloads don't have a Python representation in the API yet. They are translated into a dictionary (default Pyodide behaviour).

Python-Javascript interoperability

See: src/framework/processing/py/port

ScriptWrapper

This object is used in main to wrap the process generator function in your script. It translates incoming Javascript and outgoing Python commands.
API
- commands.py: Defines commands, pages and prompts that are used to communicate from the Python script to the VisualisationEngine and System.
- props.py: Defines property objects for pages and prompts

Code instructions

These instructions give you some pointers on things you might like to change or add to Port.

Change copy (texts shown on the web pages)

The app has two types of copy:

Dynamic copy: part of the Python script
Static copy: part of React components

Currently two languages are supported (Dutch and English). The Translatable object plays a central role and has a Python and a Typescript implementation

From Python code copy can be used as follows:

from port.api.props import Translatable

copy = Translatable({
    "en": "English text",
    "nl": "Nederlandse tekst"
})

In React components copy is handled as follows:

import TextBundle from '../../../../text_bundle'
import { Translator } from '../../../../translator'
import { Translatable } from '../../../../types/elements'

interface Props {
    dynamicCopy: Translatable // from Python script
    locale: string
}

export const MyComponent = ({ dynamicCopy, locale }: Props): JSX.Element => {
    const dynamicText = Translator.translate(dynamicCopy, locale)
    const staticText = Translator.translate(staticCopy(), locale)

    return (
        <>
            <div>{dynamicText}</div>
            <div>{staticText}</div>
        </>
    )
}

const staticCopy = (): Translatable => {
    return new TextBundle()
        .add('en', 'English')
        .add('nl', 'Nederlands')
}

Add new prompt

Add the properties of the prompt in [src/framework/types/prompts.ts](src/framework/types/prompts.ts) with the following template:

export type PropsUIPrompt =
    PropsUIPromptNew |
    ...

export interface PropsUIPromptNew {
    __type__: 'PropsUIPromptNew'
    title: Text
    description: Text
    ...
}
export function isPropsUIPromptNew (arg: any): arg is PropsUIPromptNew {
    return isInstanceOf<PropsUIPromptNew>(arg, 'PropsUIPromptNew', ['title', 'description', ... ])
}

Add the prompt component to src/framework/visualisation/react/ui/prompts with the following template:

import { Weak } from '../../../../helpers'
import { ReactFactoryContext } from '../../factory'
import { PropsUIPromptNew } from '../../../../types/prompts'
import { Translator } from '../../../../translator'
import { Title2, BodyLarge } from '../elements/text'
import { PrimaryButton } from '../elements/button'

type Props = Weak<PropsUIPromptNew> & ReactFactoryContext

export const New = (props: Props): JSX.Element => {
    const { resolve } = props
    const { title, description, continueButton } = prepareCopy(props)

    function handleContinue (): void {
        // Send payload back to script
        resolve?.({ __type__: 'PayloadTrue', value: true })
    }

    return (
        <>
            <Title2 text={title} />
            <BodyLarge text={description} />
            <PrimaryButton label={continueButton} onClick={handleContinue} />
        </>
    )
}

interface Copy {
    title: string
    description: string
    continueButton: string
}

function prepareCopy ({ title, locale }: Props): Copy {
    return {
        title: Translator.translate(title, locale),
        description: Translator.translate(description, locale),
        continueButton: Translator.translate(continueButtonLabel(), locale),
    }
}

const continueButtonLabel = (): Translatable => {
    return new TextBundle()
        .add('en', 'Continue')
        .add('nl', 'Verder')
}

Use external Python libraries

Python packages are loaded using micropip:

await micropip.install("https://domain.com/path/to/python.whl", deps=False)

Add the above statement to the py_worker.js file as follows:

function installPortPackage() {
    console.log('[ProcessingWorker] load port package')
    return self.pyodide.runPythonAsync(`
        import micropip
        await micropip.install("https://domain.com/path/to/python.whl", deps=False)
        await micropip.install("/port-0.0.0-py3-none-any.whl", deps=False)

        import port
    `);  
}

The standard library is available by default. Please check The Pyodide docs for other packages you can use.

Implement support for alternative web framework

Create a new folder in [src/framework/visualisation](src/framework/visualisation) with a file inside called `engine.ts` to add support for your web framework of choice.

import { VisualisationEngine } from '../../types/modules'
import { Response, CommandUIRender } from '../../types/commands'

export default class MyEngine implements VisualisationEngine {
    locale!: string
    root!: HTMLElement

    start (root: HTMLElement, locale: string): void {
        this.root = root
        this.locale = locale
    }

    async render (command: CommandUIRender): Promise<Response> {
        // Render page and return user input as a response
        ...
    }

    terminate (): void {
        ...
    }
}

Change implementation of assembly.ts to support your new VisualisationEngine:

import MyEngine from './visualisation/my/engine'
import WorkerProcessingEngine from './processing/worker_engine'
import { VisualisationEngine, ProcessingEngine, System } from './types/modules'
import CommandRouter from './command_router'

export default class Assembly {
    visualisationEngine: VisualisationEngine
    processingEngine: ProcessingEngine
    router: CommandRouter

    constructor (worker: Worker, system: System) {
        const sessionId = String(Date.now())
        this.visualisationEngine = new MyEngine()
        this.router = new CommandRouter(system, this.visualisationEngine)
        this.processingEngine = new WorkerProcessingEngine(sessionId, worker, this.router)
    }
}

Implement support for alternative script language

To support an alternative for Python scripts, create a Javascript file (eg: `my_worker.js`) in [src/framework/processing](src/framework/processing) with the following template:

onmessage = (event) => {
    const { eventType } = event.data
    switch (eventType) {
        case 'initialise':
            // Insert initialisation code here
            self.postMessage({ eventType: 'initialiseDone' })
            break

        case 'firstRunCycle':
            runCycle(null)
            break

        case 'nextRunCycle':
            const { response } = event.data
            runCycle(response.payload)
            break

        default:
            console.log('[ProcessingWorker] Received unsupported event: ', eventType)
    }
}

function runCycle (payload) {
    console.log('[ProcessingWorker] runCycle ' + JSON.stringify(payload))
    // Insert script code here:
    // 1. Handle the payload
    // 2. Create next command, eg: 
    nextCommand = new CommandUIRender(new PropsUIPageDonation(...)) 
    self.postMessage({
        eventType: 'runCycleDone',
        scriptEvent: nextCommand
    })
}

Change the implementation of index.tsx to support your new worker file:

const workerFile = new URL('./framework/processing/my_worker.js', import.meta.url)

Make sure to add the worker to the ts-standard ignore list in package.json:

"ts-standard": {
    "ignore": [
        "src/framework/processing/my_worker.js"
    ]
}

Note: don't forget to import this new worker file in your server code

Testing

Automatic

Jest is used as a testing framework. Tests can be found here: src/test.

Run all unit tests:
```
npm run dev:test
```
Manual

Start the local web server (with hotloading enabled):
```
npm run dev:start
```
Integration with Next

To run the Port app on top of Next locally see: https://github.com/eyra/mono/blob/d3i/latest/PORT.md

Technical notes

Code generation

Code in Javascript types and Python api are currently created by hand. Since both of them are implementions of the same model we will seek the opportunity in the future to define this model in a more abstract way and generate the needed Javascript and Python code accordingly.

React

The project is a react app created by create-react-app. This is not set in stone for the future but it was a nice way to speed up the development process in the beginning. Using this strongly opinionated setup hides most of the configuration. It uses webpack to bundle and serve the app.

Code style

The project uses ts-standard for managing the code style. This is a TypeScript Style Guide, with linter and automatic code fixer based on StandardJS.

Pre-commit hooks

Before committing to github Husky runs all the necessary scripts to make sure the code conforms to ts-standard, all the tests run green, and the dist folder is up-to-date.

Digital Data Donation Infrastructure (D3I)

Port is funded by the PDI-SSH and is a collaboration between six Dutch universities and Eyra.

The consortium is composed of researchers from:

University of Amsterdam
Radboud University Nijmegen
VU Amsterdam
Utrecht University
Tilburg University
Erasmus University Rotterdam

D3I Pilot

The first phase of the project ended in December 2022 and resulted in an MVP solution to run one Port app on top of a Next bundle. This Next + Port combi can be released as a Docker image and deployed on Azure Web App Service.

jorgejesus/port