total clean up
Closed this issue · 3 comments
before xmas there was a jo final then it disappeared, theres too much clutter and slight mistakes, 1. Holes on frame ideal world they should be tapped to 3mm holes so the holes need to be 2.2mm ok you can put buts behind so no biggy there 2 the dxf file for the 6mm aluminium has broken path. 3 what are the 2 holes under the y carriage on frame for is it for a alignment tool. 4 parts for single aluminum plate make a decision and have standard set and have varients in a tree instead of the main. 5 hotend this relates too another problem the photo shows a hotend im looking for to buy but cant find it so maybe update pictures.
6.in the picture shows bearing holders on the y carriage and someone had to make his own as it only just clears frame when cable tied. Maybe more detail build instructions
Please be more careful with your english and punctuation marks, some of your sentences are hard to get.
- and 2. You can fix this by yourself and submit a pull request;)
- those are for cable management, you can ziptie wires from steppers here.
- what?
- Photos are informative only, and the extruder and hotend is subject to personal tastes and availability in stores, it does not make sense to try to keep
- There are no bearing holders for Y for single plate, you fix the bearings to the Y plate with zipties. As some people had issues with this (it needs quite thin ziptie), there will most probably be bearing holder in box_frame but that is not my priority now.
Didn't. Realise it was a english lesson
No it was not, but if you dont have time to construct meaningful sentences you cannot expect us to have time to decode what you wrote.