josefprusa/Prusa3

Issues

• No leadscrew option?

  #95 opened 9 years ago by KriLL3
  1

• Firmware Upgrade Requests

  #98 opened 6 years ago by Autoextrude
  1

• WARNING: Ignoring unknown module 'x_beltclamp'

  #96 opened 9 years ago by quillog
  3

• use hardware license?

  #97 opened 8 years ago by burdickjp
  1

• get complete BOM

  #6 opened 12 years ago by AxTheB
  26

• x-ends are mirrored

  #94 opened 9 years ago by foulowl
  4

• No BOM or instructions for z axis assembly

  #93 opened 9 years ago by mstahl
  0

• X-Carriage and Greg's Wade Extruder - Hobbed Bolt Interference

  #92 opened 10 years ago by stevereno30
  1

• y-idler enhancement

  #90 opened 10 years ago by nenadalm
  2

• Aluminium Single Plate DXF update?

  #79 opened 10 years ago by ramb0t
  2

• Getting plate cut is causing errors with some vendors.

  #89 opened 10 years ago by devonjones
  1

• yrodbracket threaded_rod_diameter use

  #86 opened 10 years ago by apapdev007
  2

• Y Motor Mount Strength

  #88 opened 10 years ago by apapdev007
  2

• Step-by-step instructions of building

  #8 opened 12 years ago by AxTheB
  4

• Z Smooth Rod Hole Sizing

  #87 opened 10 years ago by apapdev007
  4

• X-End & idler with 608

  #85 opened 10 years ago by amittel
  4

• big_htd3_lm12luu lacks information

  #81 opened 11 years ago by finalstage
  1

• Closed belt holders?

  #74 opened 11 years ago by alranel
  4

• Readme.md confusing

  #77 opened 11 years ago by jmartinz
  1

• Project README file

  #23 opened 11 years ago by KazW
  1

• compact-extruder mount holes

  #24 opened 11 years ago by misan
  1

• compact-extruder idler mounting holes

  #25 opened 11 years ago by misan
  2

• compact-extruder no room for drive gear

  #26 opened 11 years ago by misan
  2

• compact extruder is missing idler

  #27 opened 11 years ago by CaptainChemist
  2

• Prusa3ALU-FREZOVANY-v4.dxf holes

  #40 opened 11 years ago by ellensp
  1

• box_frame x-end outputs overlapped idler_bearing

  #63 opened 11 years ago by Thav
  1

• No room for M8 nut when using Wade

  #66 opened 11 years ago by alranel
  3

• error on compiling box_frame/y-belt-holder.scad

  #69 opened 11 years ago by bubbapizza
  1

• X-axis mirroring is incomplete

  #60 opened 11 years ago by darrenfreeman
  15

• Files X files dont match images (single plate)

  #41 opened 11 years ago by chihuahua0965
  2

• Commit 69ecad6 in single_plate breaks mounting for extruders

  #37 opened 11 years ago by sgraber
  4

• Greg's Wade Extruder wrong M3 nut trap size

  #59 opened 11 years ago by darrenfreeman
  3

• Y-belt holder mount doesn't match y-plate (box parts on single frame)

  #45 opened 11 years ago by jcrood
  8

• Main plane template and box build instructions

  #7 opened 11 years ago by AxTheB
  1

• Z Axis mounting

  #15 opened 11 years ago by arrfonseca
  1

• Motorside x-end places motor too close to frame (box parts on single frame)

  #43 opened 11 years ago by jcrood
  1

• Nuttraps for the z threaded rod hit the couplings (box parts on single frame)

  #44 opened 11 years ago by jcrood
  1

• total clean up

  #42 opened 11 years ago by chris334
  3

• Commit 69ecad6 in single_plate breaks mounting for extruders

  #36 opened 11 years ago by sgraber
  0

• Could someone create a calibration.scad like i2 had?

  #30 opened 12 years ago by 6of1
  4

• frame-mount.scad is still needed?

  #21 opened 12 years ago by misan
  8

• Commit History

  #22 opened 12 years ago by KazW
  6

• frame-one-layer.dxf still assumes 8mm rods

  #20 opened 12 years ago by misan
  6

• Incorrect mounting hole location for Arduino in frame.dxf

  #13 opened 12 years ago by bilsef
  1

• Belt choices question

  #19 opened 12 years ago by 6of1
  2

• Frame plate Thickness

  #16 opened 12 years ago by arrfonseca
  1

• No files for the frame

  #17 opened 12 years ago by VjyedSC0UFMc8z
  1

• prusa3 jo-final question about Z threaded rods.

  #11 opened 12 years ago by pomalin
  1

• X-carriage and extruder don't fit

  #10 opened 12 years ago by pomalin
  7

• There is no build docs at all

  #5 opened 12 years ago by AxTheB
  1