/fswatch

A cross-platform file change monitor with multiple backends: Apple OS X File System Events API, *BSD kqueue, Linux inotify and a stat-based backend.

Primary LanguageC++OtherNOASSERTION

License

README

fswatch is a file change monitor that receives notifications when the contents of the specified files or directories are modified. fswatch implements four kinds of monitors:

  • A monitor based on the File System Events API of Apple OS X.
  • A monitor based on kqueue, a notification interface introduced in FreeBSD 4.1 (and supported on most *BSD systems, including OS X).
  • A monitor based on inotify, a Linux kernel subsystem that reports file system changes to applications.
  • A monitor which periodically stats the file system, saves file modification times in memory, and manually calculates file system changes (which works anywhere stat (2) can be used).

fswatch should build and work correctly on any system shipping either of the aforementioned APIs.

Table of Contents

Features

fswatch main features are:

  • Support for many OS-specific APIs such as kevent, inotify, and FSEvents.
  • Recursive directory monitoring.
  • Path filtering using including and excluding regular expressions.
  • Customizable record format.

Limitations

The limitations of fswatch depend largely on the monitor being used:

  • The FSEvents monitor, available only on OS X, has no known limitations, and scales very well with the number of files being observed.
  • The kqueue monitor, available on any *BSD system featuring kqueue, requires a file descriptor to be opened for every file being watched. As a result, this monitor scales badly with the number of files being observed, and may begin to misbehave as soon as the fswatch process runs out of file descriptors. In this case, fswatch dumps one error on standard error for every file that cannot be opened.
  • The inotify monitor, available on Linux since kernel 2.6.13, may suffer a queue overflow if events are generated faster than they are read from the queue. In any case, the application is guaranteed to receive an overflow notification which can be handled to gracefully recover. fswatch currently throws an exception if a queue overflow occurs. Future versions will handle the overflow by emitting proper notifications.
  • The poll monitor, available on any platform, only relies on available CPU and memory to perform its task. The performance of this monitor degrades linearly with the number of files being watched.

Usage recommendations are as follows:

  • On OS X, use only the FSEvents monitor (which is the default behaviour).
  • On Linux, use the inotify monitor (which is the default behaviour).
  • If the number of files to observe is sufficiently small, use the kqueue monitor. Beware that on some systems the maximum number of file descriptors that can be opened by a process is set to a very low value (values as low as 256 are not uncommon), even if the operating system may allow a much larger value. In this case, check your OS documentation to raise this limit on either a per process or a system-wide basis.
  • If feasible, watch directories instead of files. Properly crafting the receiving side of the events to deal with directories may sensibly reduce the monitor resource consumption.
  • If none of the above applies, use the poll monitor. The authors' experience indicates that fswatch requires approximately 150 MB of RAM memory to observe a hierarchy of 500.000 files with a minimum path length of 32 characters. A common bottleneck of the poll monitor is disk access, since stat()-ing a great number of files may take a huge amount of time. In this case, the latency should be set to a sufficiently large value in order to reduce the performance degradation that may result from frequent disk access.

Getting fswatch

A regular user may be able to fetch fswatch from the package manager of your OS or a third-party one. If you are looking for fswatch for OS X, you can install it using either MacPorts or Homebrew:

# MacPorts
$ port install fswatch

# Homebrew
$ brew install fswatch

Check your favourite package manager and let us know if fswatch is missing there.

Building from Source

A user who wishes to build fswatch should get a release tarball. A release tarball contains everything a user needs to build fswatch on his system, following the instructions detailed in the Installation section below and the INSTALL file.

A developer who wishes to modify fswatch should get the sources (either from a source tarball or cloning the repository) and have the GNU Build System installed on his machine. Please read README.gnu-build-system to get further details about how to bootstrap fswatch from sources on your machine.

Getting a copy of the source repository is not recommended unless you are a developer, you have the GNU Build System installed on your machine, and you know how to bootstrap it on the sources.

Installation

See the INSTALL file for detailed information about how to configure and install fswatch. Since the fswatch builds and uses dynamic libraries, in some platforms you may need to perform additional tasks before you can use fswatch:

  • Make sure the installation directory of dynamic libraries ($PREFIX/lib) is included in the lookup paths of the dynamic linker of your operating system. The default path, /usr/local/lib, will work in nearly every operating system.

  • Refreshing the links and cache to the dynamic libraries may be required. In GNU/Linux systems you may need to run ldconfig:

    $ ldconfig
    

fswatch is a C++ program and a C++ compiler compliant with the C++11 standard is required to compile it. Check your OS documentation for information about how to install the C++ toolchain and the C++ runtime.

No other software packages or dependencies are required to configure and install fswatch but the aforementioned APIs used by the file system monitors.

Documentation

fswatch provides the following documentation:

  • Texinfo documentation, included with the distribution.
  • HTML documentation.
  • PDF documentation.
  • A wiki page.
  • A man page.

fswatch official documentation is provided in Texinfo format. This is the most comprehensive source of information about fswatch and the only authoritative one. The man page, in particular, is a stub that suggests the user to use the info page instead.

If you are installing fswatch using a package manager and you would like the PDF manual to be bundled into the package, please send a feature request to the package maintainer.

Localization

fswatch is localizable and internally uses GNU gettext to decouple localizable string from their translation. The currently available locales are:

  • English (en).
  • Italian (it).
  • Spanish (es).

To build fswatch with localization support, you need to have gettext installed on your system. If configure cannot find <libintl.h> or the linker cannot find libintl, then you may need to manually provide their location to configure, usually using the CPPFLAGS and the LDFLAGS variables. See README.osx for an example.

If gettext is not available on your system, fswatch shall build correctly, but it will lack localization support and the only available locale will be English.

Usage

fswatch accepts a list of paths for which change events should be received:

$ fswatch [options] ... path-0 ... path-n

The event stream is created even if any of the paths do not exist yet. If they are created after fswatch is launched, change events will be properly received. Depending on the watcher being used, newly created paths will be monitored after the amount of configured latency has elapsed.

The output of fswatch can be piped to other program in order to process it further:

$ fswatch -0 path | while read -d "" event \
  do \
    // do something with ${event}
  done

To run a command when a set of change events is printed to standard output but no event details are required, then the following command can be used:

$ fswatch -o path | xargs -n1 -I{} program

The behaviour is consistent with earlier versions of fswatch (v. 0.x). Please, read the Compatibility Issues with fswatch v. 0.x section for further information.

By default fswatch chooses the best monitor available on the current platform, in terms of performance and resource consumption. If the user wishes to specify a different monitor, the -m option can be used to specify the monitor by name:

$ fswatch -m kqueue_monitor path

The list of available monitors can be obtained with the -h option.

For more information, refer to the fswatch documentation.

Contributing

Everybody is welcome to contribute to fswatch. Please, see CONTRIBUTING for further information.

Bug Reports

Bug reports can be sent directly to the authors.


Copyright (c) 2014-2015 Enrico M. Crisostomo

This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 3, or (at your option) any later version.

This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.

You should have received a copy of the GNU General Public License along with this program. If not, see http://www.gnu.org/licenses/.