/tp_zigbee_valve

Primary LanguageC

Supported Targets ESP32-C6 ESP32-H2

Bachelor Thesis Elias Tilegant

Code for Zigbee remote valve control

Settings for build with ESP-IDF VSCode:

  • Target = esp32c6
  • Port = depending on your system
  • Flash-Mode = depends, usually UART

Steps to flash:

  1. Click on the flame emoji in your VS code toolbar image
  2. Thats it! Watch the output, it should automatically change to the ESP SI

(See example.log and build.log for example logs)

Fork based on: