OpenWRT McWRT Chaos Calmer is under development. Unless you have a USB to TTL cable Attitude Adjustment Release v1.0.5 should be used.
###An OpenWRT project for the Linksys WRT1900AC router.
Original source of Marvell 88W8864 Linux Driver/Firmware
https://github.com/TheDgtl/mrvl_wlan_v7drv
Base OpenWRT from fork of Belkin Mamba Tag v3.9
https://github.com/jimmychungbelkin/Mamba
You need to have installed gcc, binutils, patch, bzip2, flex, make, gettext, pkg-config, unzip, libz-dev, libc headers and Subversion 1.7.
For the Feeds to update (update.sh) from packages_12.09 you will need to have Subversion 1.7 installed. http://sagar.se/svn-1.7-on-wheezy.html
To build the image run "update.sh", "make V=s" and then when prompted press enter a lot of times :-) If successful the image should be in the "bin" directory.
Flashing firmware should be done connect to the router with an Ethernet cable.
How to update from Belkin/Linksys UI
- Login to WRT1900AC local UI
- Navigate to the Connectivity tab
- Select Manual firmware update
- Select image to load (e.g., openwrt-armadaxp--jffs2-128k.img)
- Select Update firmware
After the firmware is updated, the unit will reboot, and the default ip address will be 192.168.200.1. The default SSID's will be MAMBA_2G4, and MAMBA_5G2. The default username for OpwnWrt is 'root', and there is no default password set. The unit will ask you to set a default password after you login to the UI.
How to update from OpenWrt to Belkin/Linksys
- Login to the WRT1900AC web UI
- Select the 'System' Tab, and then 'Backup / Flash Firmware' tab
- In the 'Flash new firmware image' section click the 'choose file' button and select your firmware
- Click 'flash image'
Libtool 2.4 Version Version mismatch error:
- Change line 20 of file attitude_adjustment/package/feeds/packages/cyrus-sasl/Makefile
- PKG_FIXUP:=autoreconf libtool