/Adafruit_Python_DHT

Python library to read the DHT series of humidity and temperature sensors on a Raspberry Pi or Beaglebone Black.

Primary LanguageCMIT LicenseMIT

Adafruit Python DHT Sensor Library

Python library to read the DHT series of humidity and temperature sensors on a Raspberry Pi or Beaglebone Black.

Designed specifically to work with the Adafruit DHT series sensors ----> https://www.adafruit.com/products/385

Currently the library is tested with Python 2.6, 2.7, 3.3 and 3.4. It should work with Python greater than 3.4, too.

Installing

Dependencies

For all platforms (Raspberry Pi and Beaglebone Black) make sure your system is able to compile and download Python extensions with pip:

On Raspbian or Beaglebone Black's Debian/Ubuntu image you can ensure your system is ready by running one or two of the following sets of commands:

Python 2:

sudo apt-get update
sudo apt-get install python-pip
sudo python -m pip install --upgrade pip setuptools wheel

Python 3:

sudo apt-get update
sudo apt-get install python3-pip
sudo python3 -m pip install --upgrade pip setuptools wheel

Install with pip

Use pip to install from PyPI.

Python 2:

sudo pip install Adafruit_DHT

Python 3:

sudo pip3 install Adafruit_DHT

Compile and install from the repository

First download the library source code from the GitHub releases page, unzipping the archive, and execute:

Python 2:

cd Adafruit_Python_DHT
sudo python setup.py install

Python 3:

cd Adafruit_Python_DHT
sudo python3 setup.py install

You may also git clone the repository if you want to test an unreleased version:

git clone https://github.com/adafruit/Adafruit_Python_DHT.git

Usage

See example of usage in the examples folder.

Author

Adafruit invests time and resources providing this open source code, please support Adafruit and open-source hardware by purchasing products from Adafruit!

Written by Tony DiCola for Adafruit Industries.

MIT license, all text above must be included in any redistribution