/forgeops

ForgeRock platform assets for Kubernetes deployment. Contains the files you need to build your own Docker images and to deploy the ForgeRock Identity Platform on Kubernetes clusters.

Primary LanguagePythonOtherNOASSERTION

ForgeRock DevOps and Cloud Deployment

Kubernetes deployment for the ForgeRock platform.

This repository provides Docker and Kustomize artifacts for deploying both 6.5 and 7.0 (under development) products to a Kubernetes cluster. If you are starting out, using the master branch is recommended.

Quick Start

# Initialize the configuration profile. Important!!!
bin/config.sh -v 7.0 init
# Add the ingress IP to your /etc/hosts. Create an entry for default.iam.example.com
minikube ip
# run skaffold in dev mode
skaffold dev
# Open https://default.iam.example.com/am  in your browser

Documentation

Please see the (DevOps)[https://backstage.forgerock.com/docs/forgeops/6.5] documentation.

This GitHub repository is a read-only mirror of ForgeRock's Bitbucket Server repository. Users with BackStage accounts can make pull requests on our Bitbucket Server repository. ForgeRock does not accept pull requests on GitHub.

Disclaimer

These samples are provided on an “as is” basis, without warranty of any kind, to the fullest extent permitted by law. ForgeRock does not warrant or guarantee the individual success developers may have in implementing the code on their development platforms or in production configurations. ForgeRock does not warrant, guarantee or make any representations regarding the use, results of use, accuracy, timeliness or completeness of any data or information relating to these samples. ForgeRock disclaims all warranties, expressed or implied, and in particular, disclaims all warranties of merchantability, and warranties related to the code, or any service or software related thereto. ForgeRock shall not be liable for any direct, indirect or consequential damages or costs of any type arising out of any action taken by you or others related to the samples.

Quickstart

If you have an existing cluster and it's configured to work with kaniko then the forgeops-toolbox allows building and deploy the ForgeRock Identity Platform from within kubernetes. This minimizes the a developers local environment dependencies to be h bash, kubectl, and kustomize.

Refer to kustomize/base/toolbox/README.md for more info on getting started using the foregops-toolbox.

Configuration

The provided configuration is a basic installation that can be further extended by developers to meet their requirements. Developers should fork this repository in Git, clone the fork, and modify the various configuration files.

The configuration provides the following features:

  • Deployments for ForgeRock AM, IDM, DS and IG. IG is available but not deployed by default.
  • AM is configured with a single root realm
  • A number of OIDC clients are configured for the AM/IDM integration and the smoke tests. ** Note the idm-provisioning, idmAdminClient and the endUserUI client configurations are required for the integration of IDM and AM.
  • Directory service instances are configured for:
  • The shared AM/IDM repo (ds-idrepo)
  • The AM dynamic runtime data store for polices and agents (currently the ds-idrepo is also used for this purpose).
  • The Access Manager Core Token Service (ds-cts).
  • A very simple landing page (/web)
  • A Python test harness. This test harness (forgeops-test) exercises the basic deployment and can be modified to include additional tests.

The 7.0 deployment provide the following additional enhancements:

  • AM and IDM are integrated, and share a common repository for users. The directory server instance (ds-idrepo) is used as the user store for both products, and as the managed repository for IDM objects. A separate postgres SQL database is NOT required.
  • AM protects the IDM administration and end user UI pages.
  • The /openidm REST endpoint is protected using OAuth 2.0

Deployed URLs

When deployed, the following URLs are available (The domain name below is the default for minikube and can be modified for your environment)

Managing Configurations

The bin/config.sh utility is used to initialize a configuration and to synchronize files to and from a running instance.

A number of configuration profiles and product versions are under the config folder. The format of the folder structure is config/$VERSION/$PROFILE - where VERSION is the ForgeRock product version (6.5,7.0) and PROFILE is the configuration profile that makes up the deployment.

The config/ directory is under version control. The target docker/{version}/{product}/conf directories are NOT versioned (via .gitignore). Configuration is copied from the git versioned /conf folder to the non versioned docker folder. Consider the configuration under docker/ to be a staging area. During development, configuration can be exported out of the running product (e.g. AM or IDM) to the staging area, and if desired, copied back out to the git verioned config/ folder where it can be committed to version control.

The bin/config.sh script automates the copy / export process. The init command is used to initialize (copy from /conf/ to the staging area under docker).

config.sh takes the following arguments:

  • --profile <profile> : Specifies the profile. The default is the cdk. The environment variable $CDK_PROFILE can override the default.
  • --component <am|idm|amster|ig|all>: specifies the component to configure. This defaults to all components.
  • --version <6.5|7.0>: The platform version (default 7.0). The environment variable CDK_VERSION can override this.

To setup your environment for the CDK, use the initcommand:

bin/config.sh init

The above copies the configuration profile under the Git-managed config/7.0/cdk directory to the docker/7.0 folder

Keep in mind that the configuration files under the docker/$version/$product/$config folder are not maintained in Git.. They are considered temporary build-time assets.

You can select alternate configuration profiles, or initialize specific components:

# Initializes the "test" configuration profile for IDM 6.5
bin/config.sh --profile test --component idm --version 6.5 init
# Initialize the "test" configuration for all ForgeRock components for the default 7.0 version
bin/config.sh --profile test
#

The export command is used to export configuration from a running instance (e.g., IDM) back to the docker staging folder. Note that not all components support export functionality (currently just IDM and amster).

# Export all configurations to the docker folder
bin/config.sh export
# Export the IDM configuration to the docker folder
bin/config.sh --component idm export

The save command copies the contents of the Docker configuration back to the config/ folder where it can be versioned in Git.

# Save the docker/ configuration for all ForgeRock components back to the config/ folder
bin/config.sh save
# Save just the IDM configuration to the test configuration profile
bin/config.sh --component idm --profile test save

The diff command runs GNU diff to show the difference between the docker/ component folder and the Git configuration:

bin/config.sh --component idm --profile cdk diff

Finally, the sync command combines the export and save functions into a single command:

# Export from all running products to the docker folder, then save the results to the git folder:
bin/config.sh sync
# Export and save just idm for the test config
bin/config.sh --component idm --profile test sync

The git status command will show you any changes made to the config folder. You can decide whether to commit or discard those changes.

To discard, you can run git restore config. As a convenience, the command bin/config.sh restore runs this git command for you.

A sample session using the CDK is as follows:

bin/config.sh init
# run cdk configs
skaffold dev
# Make changes in the IDM UI. Then:
bin/config.sh sync
# See what changed
git status
# Commmit, or discard your changes
bin/config.sh restore

To add a new configuration, copy the contents of an existing configuration to your new folder:

cd config/7.0
cp -r cdk my_great_config
git add my_great_config

Changing the DS profile to support older ForgeRock releases.

To deploy the latest DS 7.0 directory server with profiles for previous (6.5) products , add the following buildArgs to the DS image:

build:
  artifacts:
  - image: ds-cts
    context: docker/7.0/ds/cts
    docker:
      buildArgs:
        profile_version: "6.5"
  - image: ds-idrepo
    context: docker/7.0/ds/idrepo
    docker:
      buildArgs:
        profile_version: "6.5"

By default, the latest setup-profile version (7.0) is deployed.

Secrets

CDK and CDM deployments use a default set of secrets. Instead of using the default secrets, you can randomly generate secrets for the ForgeRock Identity Platform using the forgeops-secrets tool. For more information about randomly generating secrets, see the forgeops-secrets README

Development SSL Certificates

If you are on minikube and would like to use a certificate that is accepted by your browser, we suggest using the mkcert program. Nginx will look for a TLS secret in the namespace called sslcert (this is defined by the ingress definition). Here is a sample of how to create and install a test certificate:

mkcert "*.iam.example.com"
kubectl create secret tls sslcert --cert=_wildcard.iam.example.com.pem --key=_wildcard.iam.example.com-key.pem

Troubleshooting Tips

Refer to the troubleshooting chapter in the DevOps Guide.

Troubleshooting suggestions:

  • The script bin/debug-log.sh will generate an HTML file with log output. Useful for troubleshooting.
  • Simplify. Deploy a single product at a time (for example, ds), and make sure it is working correctly before deploying the next product.
  • Describe a failing pod using kubectl get pods; kubectl describe pod pod-xxx
    1. Look at the event log for failures. For example, the image can't be pulled.
    2. Examine any init containers. Did each init container complete with a zero (success) exit code? If not, examine the logs from that failed init container using kubectl logs pod-xxx -c init-container-name
    3. Did the main container enter a crashloop? Retrieve the logs using kubectl logs pod-xxx.
    4. Did a docker image fail to be pulled? Check for the correct docker image name and tag. If you are using a private registry, verify your image pull secret is correct.
    5. You can use kubectl logs -p pod-xxx to examine the logs of previous (exited) pods.
  • If the pods are coming up successfully, but you can't reach the service, you likely have ingress issues:
    1. Use kubectl describe ing and kubectl get ing ingress-name -o yaml to view the ingress object.
    2. Describe the service using kubectl get svc; kubectl describe svc xxx. Does the service have an Endpoint: binding? If the service endpoint binding is not present, it means the service did not match any running pods.
  • Determine if your cluster is having issues (not enough memory, failing nodes). Watch for pods killed with OOM (Out of Memory). Commands to check:
    1. kubectl describe node
    2. kubectl get events -w
  • Most images provide the ability to exec into the pod using bash, and examine processes and logs. Use kubectl exec pod-name -it bash.
  • If skaffold dev fails because it does not have permissions to push a docker image it may be trying to push to the docker hub (the reported image name will be something like docker.io/am). When running on minikube, Skaffold assume that a push is not required as it can docker build direct to the docker machine. If it is attempting to push the docker hub it is because Skaffold thinks it is not running on minikube. Make sure your minikube context is named minikube. An alternate solution is to modify the docker build in skaffold.yaml and set local.push to false. See the skaffold.dev documentation.

Kustomizing the deployment

Create a copy of one of the environments. Example:

cd kustomize/overlays/6.5
cp -r medium my-new-overlay
  • Using a text editor, or sed, change all the occurences of the FQDN to your desired target FQDN. Example, change default.iam.forgeops.com to test.iam.forgeops.com
  • Update the DOMAIN to the proper cookie domain for AM.
  • Update kustomization.yaml with your desired target namespace (example: test). The namespace must be the same as the FQDN prefix.
  • Copy skaffold.yaml to skaffold-dev.yaml. This file is in .gitignore so it does not get checked in or overlayed on a Git checkout.
  • In skaffold-dev.yaml, edit the path for kustomize to point to your new environment folder (example: kustomize/env/test-gke).
  • Run your new configuration: skaffold dev -f skaffold-dev.yaml [--default-repo gcr.io/your-default-repo]
  • Warning: The AM install and config utility parameterizes the FQDN - but you may need to fix up other configurations in IDM, IG, end user UI, etc. This is a work in progress.

The experimental script bin/init-platform.sh can be used to create a new Skaffold and Kustomize profile for a custom domain. Refer to the help for that script.

Cleaning up

skaffold delete or skaffold delete -f skaffold-dev.yaml

If you want to delete the persistent volumes for the directory:

kubectl delete pvc --all

The script bin/clean.sh will perform the above as well as delete any generated secrets.

Continuous Deployment

The file cloudbuild.yaml is a sample Google Cloud Builder project that performs a continuous deployment to a running GKE cluster. Until AM file based configuration supports upgrade, the deployment is done fresh each time.

The deployment is triggered from a git commit to forgeops. See the documentation on automated build triggers for more information. You can also manually submit a build using:

cd forgeops
gcloud builds submit

Track the build progress in the GCP console.

Once deployed, the following URLs are available: