* ARCHIVED - PLEASE SEE NEW PROJECT - zerocar2w *

ZeroCar

Used to deploy a RaspberryPi DLNA server via a hotspot

I use this as a portable server for the kids' iPads while in the car or flying on trips.

Raspberry Pi Setup:
- This was built for the Raspberry Pi Zero W
- "Burn" the Raspbian image of your choice to the SD card with another computer
  - Try Etcher by resin.io -- https://www.balena.io/etcher/
- To allow for SSH access: https://bit.ly/2VUi53V
  - You can add a file to the boot partition called "ssh"
```
touch ssh
```
  - OR...Create a blank txt file and save it to the boot partition as ssh
- Have the RPi auto connect to you home router on boot so you can ssh in
  - Create a file in your text editor of choice called "wpa_supplicant.conf" with the below in the file
```
ctrl_interface=DIR=/var/run/wpa_supplicant GROUP=netdev
update_config=1

network={
    ssid="WIFI_ROUTER_NAME"
    psk="WIFI_ROUTER_PASSWORD"
    proto=RSN
    key_mgmt=WPA-PSK
    pairwise=CCMP
    auth_alg=OPEN
}
```
  - Save the config file in the boot partition
- Install the SD card to the RPi and boot
- SSH into the RPi through Putty or Terminal of choice https://bit.ly/2UzWyNA
- Log in and run -- sudo raspi-config
  - Setup the keyboard in internationalization tools so it's configured correctly
- Run --
```
sudo apt update
sudo apt upgrade
sudo apt install git
git clone https://github.com/jrossmanjr/zerocar.git
cd zerocar/
chmod +x zerocar.sh
sudo ./zerocar.sh
```
  - Fill in data for the prompts
  - DO NOT RESTART AT ANY PROMPTS!
The installer will prompt you for:
- SMB Password - so you can connect thru SMB to drop files in
- DLNA Server Name - so you can have a cool name in the DLNA browser of choice
- SSID Name - Name your WiFi hotspot
- Hotspot Password - give the hotspot a password to keep freeloaders out of your stuff
Access Droppy (Droppy info: https://github.com/silverwind/droppy )
- After the first reboot go to 10.0.0.1:8989 to access the Droppy interface
- Drop in files!
Access to RaspAP (RaspAP info: https://github.com/billz/raspap-webgui )
- After reboot go to 10.0.0.1 to access the RaspAP interface to change the network settings

Future

want to harden the OS to make it mostly read only -- to help with SD card corruption

jrossmanjr/zerocar

*** ARCHIVED - PLEASE SEE NEW PROJECT - zerocar2w ***

ZeroCar

* ARCHIVED - PLEASE SEE NEW PROJECT - zerocar2w *