DMRconfig is a utility for programming digital radios via USB programming cable. Supported radios:
- TYT MD-380, Retevis RT3, RT8
- TYT MD-390
- TYT MD-2017, Retevis RT82
- TYT MD-UV380
- TYT MD-UV390, Retevis RT3S
- TYT MD-9600
- Baofeng DM-1701, Retevis RT84
- Baofeng RD-5R, TD-5R
- Baofeng DM-1801
- Radioddity GD-77
- Anytone AT-D868UV
- Anytone AT-D878UV
- BTECH DMR-6x2
- Zastone D900
- Zastone DP880
- Radtel RT-27D
Read codeplug from the radio and save it to file 'device.img', and also save text configuration to 'device.conf':
dmrconfig -r [-t]
Write codeplug to the radio:
dmrconfig -w [-t] file.img
Configure the radio from text file. Previous codeplug is saved to 'backup.img':
dmrconfig -c [-t] file.conf
Show configuration from the codeplug file:
dmrconfig file.img
Apply configuration from text file to the codeplug file:
dmrconfig -c file.img file.conf
Update database of contacts from CSV file:
dmrconfig -u [-t] file.csv
Option -t enables tracing of USB protocol.
On Linux, a permission to access USB device is required. It's possible to run dmrconfig as root, like "sudo dmrconfig", but it's safer to enable access for users. Create a file /etc/udev/rules.d/99-dmr.rules with the following contents:
# TYT MD-UV380
SUBSYSTEM=="usb", ATTRS{idVendor}=="0483", ATTRS{idProduct}=="df11", MODE="666"
# Baofeng RD-5R, TD-5R, DM-1801
SUBSYSTEM=="usb", ATTRS{idVendor}=="15a2", ATTRS{idProduct}=="0073", MODE="666"
# Anytone AT-D868UV: ignore this device in Modem Manager
ATTRS{idVendor}=="28e9" ATTRS{idProduct}=="018a", ENV{ID_MM_DEVICE_IGNORE}="1"
To activate it, run:
sudo udevadm control --reload-rules
Then re-attach the USB cable to the radio.
Sources are distributed freely under the terms of Apache 2.0 license. You can download sources via GIT:
git clone https://github.com/sergev/dmrconfig
To build on Linux or Mac OS X, run:
make
make install
Regards, Serge Vakulenko KK6ABQ