/myblvmgncube

These are my notes on building my MGN BLV CoreXY printer. I hope this work helps others in building their own printers.

Primary LanguageG-codeOtherNOASSERTION

MY BLV MGN Cube

Table of contents

  1. Introduction
  2. Bill of materials
  3. Printed parts
  4. Print Settings
  5. Assembly Guide
  6. License
  7. Credits and inspiration

Introduction

This documents my journey building the MGN BLV 3D Printer designed and graciously contributed to the world by Ben Levi. My goal is to provide a guide that others can follow to build their own cubes. This guide provides instructions for my specific build as detailed below. If your configuration is different keep that in mind when following the directions.

Build Picture

My Printer

My Build Specifications

  • Standard 365mm build height frame (The one listed on BLV's site)
  • E3D V6 Cloned Hotend
  • BLTouch ABL probe
  • SKR v1.4 controller
  • TMC2208 stepper drivers
  • BIGTREETECH TFT35 V3 LCD touch screen
  • 3D printed parts

License

Licensed under CC BY-NC-SA 3.0

Credits and inspiration

This work is based on the BLV mgn Cube - 3d printer graciously donated the the community by Ben Levi and is licensed under CC BY-NC-SA 3.0. Any modified files will be clearly labelled.

Lots of tips and pointers from watching Fugatech3D's live stream on his build

Also the documentation and style modifications were greatly inspired by Greg Saun's Work