jstevensog/wixel-sdk

Issues

• Transmitter serial to source/target radio address

  #41 opened 2 years ago by Mitya1983
  3

• Can anyone help me to build WXL file for 6AAPN

  #44 opened 3 years ago by sssetuid
  1

• Android 10 and xBridge compatibility

  #43 opened 5 years ago by JonnyJohnson
  3

• Android 9 and xBridge compatibility

  #42 opened 6 years ago by JonnyJohnson
  7

• Simplified circuit

  #40 opened 6 years ago by JimZam
  3

• Never sleep xbridge

  #39 opened 7 years ago by JimZam
  8

• Cannot update transmitter id on 2.47e and 2.47f

  #33 opened 7 years ago by kxwebster
  3

• xBridge Gets one reading then fails - Sleep seems to happen even when disabled.

  #37 opened 7 years ago by old-square-eyes
  9

• Wixel-HM10 as a G4 to G5 bridge ?

  #38 opened 7 years ago by gszakacs
  3

• 2.47f problems

  #32 opened 7 years ago by danpowell88
  10

• xBridge2.wxl invalid data in file error No.2

  #34 opened 7 years ago by bordeb
  14

• Issue with BT Module HM-10

  #35 opened 7 years ago by niccoloserci
  5

• One xBridge2 as data source for two (multiple) xDrip+ phones (devices)

  #36 opened 7 years ago by bordeb
  2

• xBridge2.wxl invalid data in file error

  #16 opened 8 years ago by fredthesecond
  7

• Lock on 2.47e

  #29 opened 7 years ago by danpowell88
  16

• Channel statistics

  #30 opened 7 years ago by danpowell88
  1

• HM11 range issue

  #27 opened 7 years ago by Nemo1985
  9

• 2.47e does not work

  #28 opened 7 years ago by AlexD97
  6

• No simple recovering from sudden missing signals

  #26 opened 7 years ago
  9

• Beacon Packet length in PDF

  #25 opened 8 years ago by ClearSimpleAndPlain
  1

• waitDoingServices does not work with break flag

  #23 opened 8 years ago by savek-cc
  4

• Battery Level

  #24 opened 8 years ago by WanaGo
  25

• Wixel SDK make errors

  #7 opened 8 years ago by garidan
  1

• DexSim

  #11 opened 8 years ago by ClearSimpleAndPlain
  1

• xBridge2 (lastest code from 07/20/2015) sudden signal gaps

  #6 opened 8 years ago
  95

• Initial feedback on the xbridge documentation

  #8 opened 8 years ago by jweismann
  1

• Feature request - bridgestatus in mongo similar to devicestatus

  #9 opened 8 years ago by jweismann
  2

• Diagram for bare HM11 seems inconsistent with the datesheet

  #10 opened 8 years ago by jweismann
  2

• Delay Calculations

  #12 opened 8 years ago by ClearSimpleAndPlain
  11

• Shorter battery life by using a voltage divider (27k/10k - xDrip classic/xBridge2 firmware)

  #14 opened 8 years ago
  27

• No power when connected to lipo

  #20 opened 8 years ago by danpowell88
  2

• Power requirements - sleeping?

  #22 opened 8 years ago by savek-cc
  70

• Lipo Fuel Gauge

  #13 opened 9 years ago by mzst123
  5

• Wixel Configuration Utility doesn't open xbrige2.wxl

  #15 opened 9 years ago by antalois
  1

• Not sending Beacon packet on Waking

  #1 opened 9 years ago by jstevensog
  0

• Need flash stored flag to indicate HM-1x has been set up.

  #2 opened 9 years ago by jstevensog
  0

• how was the maximum_battery and min batt calculated

  #3 opened 9 years ago by SamuelAlinder
  6

• hm-11 firmware flash impossible

  #5 opened 9 years ago by viktoschi
  6

• Type of resistor for xBridge2

  #4 opened 9 years ago
  8