A PlatformIO program for a electronic locks that are unlocked using a Wiegand based RFID scanner and authorises users using a HMIS endpoint.
Wiegand readers with keypads are supported. You can configure the valid keycode by setting the enable_keypad_passcode
option to a numeric string up to 8 numbers long.
When using the keypad, the '*' (star) button will clear (provided it maps to 0x0A), and the '#' (Hashtag) button will submit (provided it maps to 0x0B).
This application uses PlatformIO for dependency management and installation. Installation instructions for your platform can be found here.
Configuration options have been exposed in platformio.ini under the [base_config] section.
The WiFi and HMIS options must be configured for your network and HMIS server.
The Unlock and Auth options can be configured to suit your needs.
The Pins options should be configured for your ESP, preferably in a separate section that inherits the [base_config]
section (see the [config_dfrobot_firebeetle2_esp32e] section for an example of this).
The Pin Inversions options should be configured to match your circuit.
A preset environment has been provided for the FireBeetle 2 ESP32-E (my chosen ESP32), you will need to provide your own environment with it's required pin setup if you have a different ESP32 (we welcome PRs for alternative setups).
Run the following to build and upload the project to your ESP32:
# [your-env] should be one of the configured env sections in platformio.ini
pio run -t upload -e [your-env]