Many thanks to the RATRIG team for making excellent printers.
RAT RIG XY IDLERS TENSIONERS TENSIONABLE For Both ENCLOSURE and NON-ENCLOSURE Builds.
- 2023-02-17 - NON-ENCLOSURE supported
- 2023-04-06 - ENCLOSURE supported
- Both ENCLOSURE and NON-ENCLOSURE SUPPORTED!
- XY idlers thar are Tensioners and Tensonable ~9mm of belt adjustment travel.
- Same size formfactor as stock idlers.
- Designed for use with the VZBot style Hotend Carriages https://github.com/VzBoT3D/Vz-Printhead-Printed
legacy image
- Changes have been made to the idlers so they match the stock build setup/alignments refer to offical manual for spacers/install etc. will add photo soon. https://ratrig.dozuki.com/Guide/04.+CoreXY+Idler+Assemblies/161?lang=en
- EXISTING hardware set from idlers 6MM SPACERS 3MM SPACERS USE GUIDE ABOVE
- X2 M5 50 mm minimum OR M5 65-70MM PINS
- x4 M4 60mm TENSION PULL BOLTS
- x4 M4 HeatSetNuts
- x2 M5 HeatSetNuts
- x4 M4 Washers
- X12 M6 8MM BOLTS
- X12 M6 TEE NUTS
CAD Photos
- 1 drill hole in front corner plates to be able to access the bottom tension bolt
- PLEASE SEND ME FEEDBACK
- Might have collision issues on enclosure lead screw support baracket mount. It will be close - pretty sure it fits with 3mm gap
- if you install this please send me a photo on discord!
- Discord julianjc84#7938