Trying to compile I get "Invalid board 'bbbmini-v2"

[Seeelefant]

Trying to compile Arducopter I get "Invalid board 'bbbmini-v2':

**********@**********-virtual-machine:~/temp/ardupilot$ ./waf configure --board=bbbmini-v2
Setting top to                           : /home/**********/temp/ardupilot 
Setting out to                           : /home/**********/temp/ardupilot/build 
Autoconfiguration                        : enabled 
Setting board to                         : bbbmini-v2 
Invalid board 'bbbmini-v2': choices are aero, airbotf4, AIRLink, ARK_GPS, bbbmini, BeastF7, BeastF7v2, BeastH7, BeastH7v2, bebop, bhat, BirdCANdy, blue, CarbonixL496, crazyflie2, CUAV-Nora, CUAV-X7, CUAV-X7-bdshot, CUAV_GPS, CUAVv5, CUAVv5-bdshot, CUAVv5Nano, CUAVv5Nano-bdshot, CubeBlack, CubeBlack+, CubeBlack-periph, CubeGreen-solo, CubeOrange, CubeOrange-bdshot, CubeOrange-joey, CubeOrange-ODID, CubeOrange-periph, CubeOrange-periph-heavy, CubeOrangePlus, CubePurple, CubeSolo, CubeYellow, CubeYellow-bdshot, dark, DevEBoxH7v2, disco, DrotekP3Pro, Durandal, Durandal-bdshot, edge, erleboard, erlebrain2, esp32buzz, esp32diy, f103-ADSB, f103-Airspeed, f103-GPS, f103-HWESC, f103-QiotekPeriph, f103-RangeFinder, f103-Trigger, f303-GPS, f303-HWESC, f303-M10025, f303-M10070, f303-MatekGPS, f303-PWM, f303-Universal, F35Lightning, f405-MatekAirspeed, f405-MatekGPS, F4BY, FlyingMoonF407, FlyingMoonF427, FlywooF745, FlywooF745Nano, fmuv2, fmuv3, fmuv3-bdshot, fmuv5, FreeflyRTK, G4-ESC, H757I_EVAL, H757I_EVAL_intf, HereID, HerePro, Hitec-Airspeed, HitecMosaic, HolybroG4_GPS, HolybroGPS, iomcu, iomcu_f103_8MHz, JHEMCU-GSF405A, JHEMCU-GSF405A-RX2, KakuteF4, KakuteF4Mini, KakuteF7, KakuteF7-bdshot, KakuteF7Mini, KakuteH7, KakuteH7-bdshot, KakuteH7Mini, linux, luminousbee4, luminousbee5, MambaF405-2022, MambaF405US-I2C, MambaF405v2, MambaH743v4, MatekF405, MatekF405-bdshot, MatekF405-CAN, MatekF405-STD, MatekF405-TE, MatekF405-Wing, MatekF765-SE, MatekF765-Wing, MatekF765-Wing-bdshot, MatekH743, MatekH743-bdshot, MatekH743-periph, MazzyStarDrone, mindpx-v2, mini-pix, modalai_fc-v1, mRo-M10095, mRoControlZeroClassic, mRoControlZeroF7, mRoControlZeroH7, mRoControlZeroH7-bdshot, mRoControlZeroOEMH7, mRoNexus, mRoPixracerPro, mRoPixracerPro-bdshot, mRoX21, mRoX21-777, navigator, navio, navio2, Nucleo-G491, Nucleo-L476, Nucleo-L496, NucleoH743, obal, ocpoc_zynq, omnibusf4, omnibusf4pro, omnibusf4pro-bdshot, omnibusf4pro-one, omnibusf4v6, OMNIBUSF7V2, OMNIBUSF7V2-bdshot, OmnibusNanoV6, OmnibusNanoV6-bdshot, PH4-mini, Pix32v5, PixC4-Jetson, Pixhawk1, Pixhawk1-1M, Pixhawk1-1M-bdshot, Pixhawk4, Pixhawk4-bdshot, Pixhawk5X, Pixhawk6C, Pixhawk6X, Pixhawk6X-ODID, Pixracer, Pixracer-bdshot, Pixracer-periph, PixSurveyA1, pocket, pxf, pxfmini, QioTekZealotF427, QioTekZealotH743, R9Pilot, ReaperF745v2, revo-mini, revo-mini-bdshot, revo-mini-i2c, revo-mini-i2c-bdshot, rst_zynq, Sierra-F405, Sierra-F412, Sierra-F9P, Sierra-L431, sitl, SITL_arm_linux_gnueabihf, sitl_periph_gps, SITL_static, SITL_x86_64_linux_gnu, skyviper-f412-rev1, skyviper-journey, skyviper-v2450, sparky2, speedybeef4, SPRacingH7, SuccexF4, Swan-K1, TBS-Colibri-F7, vnav, VRBrain-v51, VRBrain-v52, VRBrain-v54, VRCore-v10, VRUBrain-v51, ZubaxGNSS, zynq
(complete log in /home/**********/temp/ardupilot/build/config.log)

Please advice.