Copyright (C) 2021-2022 Jyothiraditya Nellakra
Version 10.5: A Friend's Rice Noodles
bfcli:0%
I made this program as a challenge to myself in incorporating all the features I felt would be needed to make an interactive programming tool for command-line use. In this sense, the choice of the programming language being Brainfuck was mainly inspired by its relative simplicity; each command is a character and the only grammar to parse is to ensure the number of brackets match up.
Nevertheless, incorporating necessary functionality was rather difficult, and despite my intention to make this program easy to port across multiple platforms, I realised early on that many of my plans would require libraries beyond the cstdlib. Hence, this program was written with an increasing emphasis on UNIX and Linux as development continued.
The following is a non-exhaustive list of the functionality I added:
-
A prompt that allows you enter a line of Brainfuck to be run immediately, accompanied by a secondary prompt for continuing the line, invoked when the original line contained unmatched brackets or an unclosed brace.
-
The use of
!and;to hint to the interpreter that the user is not yet finished writing a block of code and that the user is done writing a block of code, respectively. (Notably, the block still isn't actually finished until all of the matching brackets have been written out.) -
The command
?to pull up a help dialogue for both the Brainfuck programming language as well as the functionality of this program at the main prompt. -
The command
/to clear the memory and reset the pointer to zero. -
The commands
*and&to print a memory listing of the values around the current pointer, and produce a complete memory dump to aid with debugging of code. -
The command
$compiles the program to object code and then disassembles it. This makes it easier to read the logic than pure brainfuck since it replaces the endless stream of pluses, minuses and arrows with opcodes and numeric values. -
The configurable disabling of
STDINbuffering when running Brainfuck code and alternative behaviour for ^C, either exiting the program if called at the main prompt, clearing the line of code if called at the secondary prompt, or stopping the execution of the running Brainfuck program. -
Integration with
libClameto provide command-line argument parsing, which is used for providing program information with command line switches, specifying if colour output should be enabled, and pre-emptively declaring the file to be loaded into memory. This library is also used as the backbone for the command-line itself. -
Colour support for highlighting important information on the screen, as well as a monochrome, non-ANSI, and printer-friendly 'minimal' mode.
-
Loading valid Brainfuck files at the prompt, performing code buffer editing with
%and executing them with@. (Again, thanks to intergration withlibClame.) -
Translating Brainfuck code to C source code as well as partial or complete compilation to many different assembly languages. The latter significantly boosts compilation performance while offering similar performance to GCC's
-O3. There are also different levels of optimisation when converting Brainfuck code to C or Assembly.
You will need to have an up-to-date version of GNU C Compiler and GNU Make. You can compile the code by running make at the command-line after cd'ing into the source code folder.
Then, to start the compiled program, you can then run ./bfcli. Some example Brainfuck code is provided in the demo folder if you wish to try to them out.
The following are the command-line arguments that this program accepts:
Usage: bf [ARGS] [FILE]
Valid arguments are:
-a, --about Prints the licence and about dialogue.
-h, --help Prints the help dialogue.
-v, --version Prints the program version.
-n, --no-ansi Disables the use of ANSI escape sequences.
-m, --minimal Disables Brainfuck extensions.
Note: The use of ANSI escape sequences is enabled by default.
Note: When in Minimal Mode, it's you and the original Brainfuck language, and
that's it. All of the extensions of interactive mode are disabled.
-f, --file FILE Loads the file FILE into memory.
-l, --length LEN Sets the shell's code buffer length to LEN.
-r, --ram SIZE Sets the shell's total memory size to SIZE.
Note: If a file is specified without -f, it is run immediately and the
program exits as soon as the execution of the file terminates. Use -f
if you want the interactive prompt.
Note: If a file is specified with -f, the code buffer's length is set to LEN
plus the file's length.
-t, --translate Translates the file to C source code and exits.
-x, --compile Generates assembly code intermixed with the C output.
(Implies -t)
-s, --standalone Generates a standalone .s assembly file. (Implies -x,
Incompatible with -d)
-d, --direct-inp Disables input buffering. Characters are sent to
Brainfuck code without waiting for a newline.
-o, --output OUT Sets the output file for the translated C code and the
memory dump to OUT.
-A, --arch ARCH Sets the assembly architecture to ARCH. Valid values are
amd64, i386, 8086, z80 (this feature is in beta) and bfir
(Intermediate compiler code representation).
-O, --optim BAND Sets the optimisation band to BAND. Valid values are 0,
1, 2, 3, P/p, S/s and A/a.
-M, --max-subs N Sets the maximum number of subroutines and relocations
used by `-OS` to N. (N = -1 disables the limit.)
Note: If no output file is specified, a filename is chosen automatically. The
output filename of `-' designates stdout.
Note: The following is the list of optimisations enabled by the --optim flags:
0: No optimisations enabled beyond run-length compression.
1: Merges most FWD and BCK operations into indexed INCs and DECs.
2: Detects and converts loops into multiply-and-add operations.
3: Optimises addition to zeroed-out cells away to a simple copy.
P/p: Precomputes final values as far as possible.
S/s: Moves repeated code to dedicated subroutines to save space.
A/a: Applies both precomputation and subroutine detection.
Happy coding! :)
TL;DR:
Usage: bf [ARGS] [FILE]
Valid arguments are:
-a, --about | -h, --help | -v, --version | -m, --minimal
-n, --no-ansi | -f, --file FILE |
-d, --direct-inp | -l, --length LEN | -r, --ram SIZE | -t, --translate
-x, --compile | -s, --standalone |
-o, --output OUT | -A, --arch ARCH | -O, --optim BAND | -M, --max-subs N
Happy coding! :)
The following is the help dialogue for the interactive functionality:
Interactive Brainfuck interpreter; exit with ^C.
Brainfuck commands:
> Increments the data pointer.
< Decrements the data pointer.
+ Increments the value at the data pointer.
- Decrements the value at the data pointer.
Note: Data values are modulo-256 unsigned integers, meaning 0 - 1 = 255, and
255 + 1 = 0.
. Outputs the value at the data pointer as an ASCII character.
, Inputs an ASCII character and stores its value at the data pointer.
[ (Open bracket) begins a loop.
] (Close brace) ends a loop.
Note: Loops run while the value at the data pointer is non-zero.
Extended Brainfuck commands:
? Prints the help and copyright disclaimer to the console.
/ Clears the memory and moves the pointer to 0.
* Prints memory values around the current pointer value.
& Prints all memory values.
Note: When ANSI support is enabled, & pauses at the end of the first screen
of text and displays a the prompt ':'. Here, you can type any key to
advance the memory dump by one line, enter to advance it by one page,
or tab to complete the rest of the dump without pausing again.
Note: When an output file is specified with -o, the memory dump is redirected
to that file instead of being displayed on the console.
Note: Extended Brainfuck commands are disabled when executing file code, and
will simply be ignored. This is done for compatibility with vanilla
Brainfuck programs.
! Indicates to wait for more code before execution.
; Indicates to stop waiting for more code before execution.
Note: The above two commands can be placed anywhere in a line and and will
function correctly, but they may prove most useful at the ends of lines
while typing long sections of code.
Note: The interpreter will still wait for more code if the current code
contains unmatched brackets.
@ Executes code from the code buffer.
% Edits code in the code buffer.
$ Disassembles the object code generated for the code buffer.
Note: In order to load a file when Bfcli is running, type the file name at
the main prompt. When files are loaded, they are put into the code
buffer.
Note: Buffer Editing functionality is disabled when the use of ANSI escape
sequences is disabled. % will simply print the contents of the code
buffer in this case.
Finally, to install the code, you can run make install. This will install it to ~/.local/bin where ~ is your user's home folder. If you wish to change this location, you can specify a new one with DESTDIR=<location> make install. However, you may need to run the command with elevated privileges if installing to a system folder like /bin.
That said, if you want to also use this as the default Brainfuck interpreter on your system, you can run make global to symlink (your install location)/bfcli to /bin/bfcli.
If you happen to find any bugs, or want to contribute some code of your own, feel free to create an issue or pull request.
Additionally, if you wish to contact me, feel free to mail me at jyothiraditya.n@gmail.com.
Happy Coding!