jzwart/delaware-water-temp

Issues

• Temperature calibration

  #30 opened 4 years ago by jzwart
  4

• Use additional Gridmet drivers as meterological inputs

  #31 opened 4 years ago by jzwart
  2

• Looking into parameters for changing initial temperature and flow

  #32 opened 4 years ago by jzwart
  0

• Use NetCDF for storing parameters, drivers, and output

  #20 opened 4 years ago by jzwart
  1

• Create archive of historical forecasted driver data

  #12 opened 4 years ago by jzwart
  6

• Comparison of Gridmet and Daymet drivers on PRMS-SNTemp model output

  #29 opened 4 years ago by jzwart
  1

• Flow calibration

  #28 opened 4 years ago by jzwart
  0

• Add covariance inflation factor to DA

  #26 opened 4 years ago by jzwart
  0

• Adjust weights for PESTPP based on observation type

  #23 opened 4 years ago by jzwart
  2

• Updating states and parameters are sometimes at odds with each other

  #22 opened 4 years ago by jzwart
  0

• Localization for assimilating observations

  #19 opened 4 years ago by jzwart
  0

• Get more subbasins for RGCN training

  #17 opened 4 years ago by jzwart
  3

• Higher tmin / tmax for new driver data

  #16 opened 4 years ago by jzwart
  2

• Add temp min and max to SNTemp output

  #14 opened 4 years ago by jzwart
  0

• Split up SNTemp output into input / output / intermediates

  #13 opened 4 years ago by jzwart
  0

• Catchment attributes

  #3 opened 5 years ago by jsadler2
  8