/*
* In this sketch Arduino reads temperature with a simple two wire thermistor,
* records data to SDCard and display data at Nokia 5110 LCD using JeeLib Low power
* functions library to save on Arduino Power consumption
*
* Creator: k3ntinhu@gmail.com
* Date: 23 Jan 2017
* Update: 26 Jan 2017
*
*
--> SD Card Reader
The circuit:
SD card attached to SPI bus as follows:
** MOSI - pin 11
** MISO - pin 12
** CLK - pin 13
** CS - pin 4 (for MKRZero SD: SDCARD_SS_PIN)
--> LCD5110
This program requires a Nokia 5110 LCD module.
It is assumed that the LCD module is connected to
5 - CLK/SCK - Pin 9
4 - DIN/MOSI - Pin 3
3 - DC - Pin 5
1 - RST - Pin 7
2 - CE/CS - Pin 6
--> BATTERY VOLTAGE
displays the voltage on the serial monitor and/or LCD shield
works with 3.3volt and 5volt Arduinos
uses the internal 1.1volt reference
IMPORTANT:
Arduino Vin --> 150k resistor <-- Analog pin 5
Analog pin 5 --> 10k resistor <-- Ground
optional 100n capacitor from Analog pin to ground for stable readings
--> TWO WIRE THERMISTOR CONNECTIONS
Vcc <-- Thermistor1 | Thermistor 2 --> 10K resistor --> Ground
*/
k3ntinhu/Arduino-Temperature-Reader
Arduino reads temperature with a simple two wire thermistor, saves data to SD Card and sleep for a period of time.
Arduino