TornadoVM is a plug-in to OpenJDK and GraalVM that allows programmers to automatically run Java programs on heterogeneous hardware. TornadoVM currently targets OpenCL-compatible devices and it runs on multi-core CPUs, dedicated GPUs (NVIDIA, AMD), integrated GPUs (Intel HD Graphics and ARM Mali), and FPGAs (Intel and Xilinx).
Website: tornadovm.org
For a quick introduction please read the following FAQ.
Current Release: TornadoVM 0.14 - 15/06/2022 : See CHANGELOG
Previous Releases can be found here
In Linux and Mac OSx, TornadoVM can be installed automatically with the installation script. For example:
$ ./scripts/tornadovmInstaller.sh
TornadoVM installer for Linux and OSx
./scripts/tornadoVMInstaller.sh <JDK> <BACKENDS>
JDK (select one):
--jdk11 : Install TornadoVM with OpenJDK 11
--jdk17 : Install TornadoVM with OpenJDK 17
--graal-jdk-11 : Install TornadoVM with GraalVM and JDK 11 (GraalVM 22.1.0)
--graal-jdk-17 : Install TornadoVM with GraalVM and JDK 17 (GraalVM 22.1.0)
--corretto-11 : Install TornadoVM with Corretto JDK 11
--corretto-17 : Install TornadoVM with Corretto JDK 17
--mandrel-11 : Install TornadoVM with Mandrel 22.1.0 (JDK 11)
--mandrel-17 : Install TornadoVM with Mandrel 22.1.0 (JDK 17)
--microsoft-jdk-11 : Install TornadoVM with Microsoft JDK 11
--microsoft-jdk-17 : Install TornadoVM with Microsoft JDK 17
--zulu-jdk-11 : Install TornadoVM with Azul Zulu JDK 11
--zulu-jdk-17 : Install TornadoVM with Azul Zulu JDK 17
TornadoVM Backends:
--opencl : Install TornadoVM and build the OpenCL backend
--ptx : Install TornadoVM and build the PTX backend
--spirv : Install TornadoVM and build the SPIR-V backend
Help:
--help : Print this help
NOTE Select the desired backend:
--opencl: Enables the OpenCL backend (requires OpenCL drivers)--ptx: Enables the PTX backend (requires NVIDIA CUDA drivers)--spirv: Enables the SPIRV backend (requires Intel Level Zero drivers)
Alternatively, TornadoVM can be installed either manually from source or by using Docker.
You can also run TornadoVM on Amazon AWS CPUs, GPUs, and FPGAs following the instructions here.
TornadoVM is currently being used to accelerate machine learning and deep learning applications, computer vision, physics simulations, financial applications, computational photography, and signal processing.
We have a use-case, kfusion-tornadovm, for accelerating a computer-vision application implemented in Java using the Tornado-API to run on GPUs.
We also have a set of examples that includes NBody, DFT, KMeans computation and matrix computations.
Additional Information
TornadoVM exposes to the programmer task-level, data-level and pipeline-level parallelism via a light Application Programming Interface (API). In addition, TornadoVM uses single-source property, in which the code to be accelerated and the host code live in the same Java program.
Compute-kernels in TornadoVM can be programmed using two different approaches:
Compute kernels are written in a sequential form (tasks programmed for a single thread execution). To express
parallelism, TornadoVM exposes two annotations that can be used in loops and parameters: a) @Parallel for annotating
parallel loops; and b) @Reduce for annotating parameters used in reductions.
The following code snippet shows a full example to accelerate Matrix-Multiplication using TornadoVM and the loop-parallel API:
public class Compute {
private static void mxmLoop(Matrix2DFloat A, Matrix2DFloat B, Matrix2DFloat C, final int size) {
for (@Parallel int i = 0; i < size; i++) {
for (@Parallel int j = 0; j < size; j++) {
float sum = 0.0f;
for (int k = 0; k < size; k++) {
sum += A.get(i, k) * B.get(k, j);
}
C.set(i, j, sum);
}
}
}
public void run(Matrix2DFloat A, Matrix2DFloat B, Matrix2DFloat C, final int size) {
TaskSchedule ts = new TaskSchedule("s0")
.streamIn(A, B) // Stream data from host to device
.task("t0", Compute::mxmLoop, A, B, C, size) // Each task points to an existing Java method
.streamOut(C); // sync arrays with the host side
ts.execute(); // It will execute the code on the default device (e.g. a GPU)
}
}Another way to express compute-kernels in TornadoVM is via the kernel-parallel API. To do so, TornadoVM exposes
a KernelContext with which the application can directly access the thread-id, allocate memory in local memory
(shared memory on NVIDIA devices), and insert barriers. This model is similar to programming compute-kernels in OpenCL
and CUDA. Therefore, this API is more suitable for GPU/FPGA expert programmers that want more control or want to port
existing CUDA/OpenCL compute kernels into TornadoVM.
The following code-snippet shows the Matrix Multiplication example using the kernel-parallel API:
public class Compute {
private static void mxmKernel(KernelContext context, Matrix2DFloat A, Matrix2DFloat B, Matrix2DFloat C, final int size) {
int idx = context.threadIdx;
int jdx = context.threadIdy;
float sum = 0;
for (int k = 0; k < size; k++) {
sum += A.get(idx, k) * B.get(k, jdx);
}
C.set(idx, jdx, sum);
}
public void run(Matrix2DFloat A, Matrix2DFloat B, Matrix2DFloat C, final int size) {
// When using the kernel-parallel API, we need to create a Grid and a Worker
WorkerGrid workerGrid = new WorkerGrid2D(size, size); // Create a 2D Worker
GridScheduler gridScheduler = new GridScheduler("s0.t0", workerGrid); // Attach the worker to the Grid
KernelContext context = new KernelContext(); // Create a context
workerGrid.setLocalWork(32, 32, 1); // Set the local-group size
TaskSchedule ts = new TaskSchedule("s0")
.streamIn(A, B) // Stream data from host to device
.task("t0", Compute::mxmKernel, context, A, B, C, size) // Each task points to an existing Java method
.streamOut(C); // sync arrays with the host side
ts.execute(gridScheduler); // Execute with a GridScheduler
}
}Additionally, the two modes of expressing parallelism (kernel and loop parallelization) can be combined in the same task-schedule object.
Dynamic reconfiguration is the ability of TornadoVM to perform live task migration between devices, which means that TornadoVM decides where to execute the code to increase performance (if possible). In other words, TornadoVM switches devices if it can detect that a specific device can yield better performance (compared to another). With the task-migration, the TornadoVM's approach is to only switch device if it detects an application can be executed faster than the CPU execution using the code compiled by C2 or Graal-JIT, otherwise it will stay on the CPU. So TornadoVM can be seen as a complement to C2 and Graal. This is because there is no single hardware to best execute all workloads efficiently. GPUs are very good at exploiting SIMD applications, and FPGAs are very good at exploiting pipeline applications. If your applications follow those models, TornadoVM will likely select heterogeneous hardware. Otherwise, it will stay on the CPU using the default compilers (C2 or Graal).
To use the dynamic reconfiguration, you can execute using TornadoVM policies. For example:
// TornadoVM will execute the code in the best accelerator.
ts.execute(Policy.PERFORMANCE);Further details and instructions on how to enable this feature can be found here.
- Dynamic reconfiguration: https://dl.acm.org/doi/10.1145/3313808.3313819
You can import the API and start using TornadoVM. Set this in the pom.xml file.
<repositories>
<repository>
<id>universityOfManchester-graal</id>
<url>https://raw.githubusercontent.com/beehive-lab/tornado/maven-tornadovm</url>
</repository>
</repositories>
<dependencies>
<dependency>
<groupId>tornado</groupId>
<artifactId>tornado-api</artifactId>
<version>0.14</version>
</dependency>
<dependency>
<groupId>tornado</groupId>
<artifactId>tornado-matrices</artifactId>
<version>0.14</version>
</dependency>
</dependencies>To run TornadoVM, you need to either install the TornadoVM extension for GraalVM/OpenJDK, or run with our Docker images.
Here you can find videos, presentations, and articles and artefacts describing TornadoVM and how to use it.
If you are using TornadoVM >= 0.2 (which includes the Dynamic Reconfiguration, the initial FPGA support and CPU/GPU reductions), please use the following citation:
@inproceedings{Fumero:DARHH:VEE:2019,
author = {Fumero, Juan and Papadimitriou, Michail and Zakkak, Foivos S. and Xekalaki, Maria and Clarkson, James and Kotselidis, Christos},
title = {{Dynamic Application Reconfiguration on Heterogeneous Hardware.}},
booktitle = {Proceedings of the 15th ACM SIGPLAN/SIGOPS International Conference on Virtual Execution Environments},
series = {VEE '19},
year = {2019},
doi = {10.1145/3313808.3313819},
publisher = {Association for Computing Machinery}
}If you are using Tornado 0.1 (Initial release), please use the following citation in your work.
@inproceedings{Clarkson:2018:EHH:3237009.3237016,
author = {Clarkson, James and Fumero, Juan and Papadimitriou, Michail and Zakkak, Foivos S. and Xekalaki, Maria and Kotselidis, Christos and Luj\'{a}n, Mikel},
title = {{Exploiting High-performance Heterogeneous Hardware for Java Programs Using Graal}},
booktitle = {Proceedings of the 15th International Conference on Managed Languages \& Runtimes},
series = {ManLang '18},
year = {2018},
isbn = {978-1-4503-6424-9},
location = {Linz, Austria},
pages = {4:1--4:13},
articleno = {4},
numpages = {13},
url = {http://doi.acm.org/10.1145/3237009.3237016},
doi = {10.1145/3237009.3237016},
acmid = {3237016},
publisher = {ACM},
address = {New York, NY, USA},
keywords = {Java, graal, heterogeneous hardware, openCL, virtual machine},
}
Selected publications can be found here.
This work is partially funded by Intel corporation the EU Horizon 2020 ELEGANT 957286 grant. In addition, it has been supported by EU Horizon 2020 E2Data 780245, the EU Horizon 2020 ACTiCLOUD 732366, and EPSRC PAMELA EP/K008730/1, and AnyScale Apps EP/L000725/1 grants.
We welcome collaborations! Please see how to contribute to the project in the CONTRIBUTING page.
Additionally, you can open new proposals on the Github discussions page:https://github.com/beehive-lab/TornadoVM/discussions
A mailing list is also available to discuss TornadoVM related issues: tornado-support@googlegroups.com
For Academic & Industry collaborations, please contact here.
Visit our website to meet the team.
To use TornadoVM, you can link the TornadoVM API to your application which is under the CLASSPATH Exception of GPLv2.0.
Each TornadoVM module is licensed as follows:
| Module | License |
|---|---|
| Tornado-API |  + CLASSPATH Exception |
| Tornado-Runtime | |
| Tornado-Assembly | |
| Tornado-Drivers | |
| Tornado-Drivers-OpenCL-Headers |  |
| Tornado-scripts | |
| Tornado-Annotation |  |
| Tornado-Unittests | |
| Tornado-Benchmarks | |
| Tornado-Examples | |
| Tornado-Matrices | |
| JNI Libraries (OpenCL, PTX and LevelZero) | |