/selector

Filter sObject collections based on declarative criteria.

Primary LanguageApexOtherNOASSERTION

selector

Filter sObjects based on various criteria.

introduction

You know why this exists. Every time you write a new trigger you end up reimplementing the same filters over and over again.

List<Account> filteredAccounts = new List<Account>();

for ( Account newAccount : Trigger.new )
{
    Account oldAccount = Trigger.oldMap.get( newAccount.Id );

    if ( newAccount.Name != oldAccount.Name )
    {
        filteredAccounts.add( newAccount );
    }
}

return filteredAccounts;

Wouldn't you rather write this:

return Select.Field.hasChanged( Account.Name )
                   .filter( Trigger.new, Trigger.oldMap );

specifying fields

For fields directly on the objects being filtered, use the Schema.sObjectField to reference for the safest code. It is also possible to pass in String field references, which can traverse parent relationships. For instance, in an OpportunityLineItem trigger:

Select.Field.isEqual( 'Opportunity.Account.Region', 'Midwest' )
            .filter( opportunityLineItems );

combining filters

If the filter you need is simply a logical combination of built-ins or existing custom filters, you can use the filter composition methods to build it up.

// !((filterA && filterB) || filterC)
Select.Filter myComplexFilter = filterA.andx( filterB )
                                       .orx( filterC )
                                       .notx();

extending the predicates

If the built-in filters are not sufficient, it is simple enough to extend them with your own. Implement the Predicate interface, which evaluates an sObject to determine whether to include it in the results.

// custom filter predicate
class GrowingAccountPredicate implements Select.Predicate
{
    Boolean evaluate( sObject newRecord )
    {
        return newRecord.get( 'Annual_Sales__c' ) > 50000;
    }

    Boolean evaluate( sObject newRecord, sObject oldRecord )
    {
        return newRecord.get( 'Annual_Sales__c' ) > oldRecord.get( 'Annual_Sales__c' );
    }
}

// factory method for the custom filter
Select.Filter isGrowingAccount()
{
    return new Select.Filter( new GrowingAccountPredicate() );
}

// usage of the custom filter
List<Accounts> filterGrowingAccounts()
{
    return MyFilter.isGrowingAccount()
                   .filter( Trigger.new );
}

This may seem like a lot of work, but consider this: as long as you unit test your custom predicate you can dispense with significant testing of your filter methods. And since testing predicates is much simpler than testing filters (because of their singular nature) this is quite easy.

testing advantages

Another point on testing. Since this library is (presumably) well-tested, there is no need for your tests to deal with mixed filter cases at all. To make life easier for yourself, use dependency injection to have your tests to use a simpler filter, and test the positive and negative cases independently. For instance,

// somewhere in a service class

// ...
@TestVisible static Select.Filter accountChanged = Select.Field.hasChanged( Contact.AccountId );

public List<Contact> filterAccountChanged( List<Contact> newRecords, Map<Id, Contact> oldRecords )
{
    return accountChanged.filter( newRecords, oldRecords );
}
// ...

// in the corresponding test class

// ...
private static testMethod void testSomeHighLevelThing()
{
    // when setting up test data, don't bother
    // meeting filter criteria
    // ...

    // inject a filter that passes ALL records
    ContactServices.accountChanged = Select.Records.all();

    Test.startTest();

        ContactServices.doSomeHighLevelThing( contacts );

    Test.stopTest();

    // Don't bother checking that the FILTERED records are EXCLUDED
    // ...
}

private static testMethod void testSomeHighLevelThing_Negative()
{
    // when setting up test data, don't bother
    // meeting filter criteria
    // ...

    // inject a filter that passes NONE of the records
    ContactServices.accountChanged = Select.Records.none();

    Test.startTest();

        ContactServices.doSomeHighLevelThing( contacts );

    Test.stopTest();

    // Don't bother checking that the UNFILTERED records are INCLUDED
    // ...
}
// ...

For more information consult the API reference below.

installation

Install the managed package Latest:

Version 1.2

reference

Filter instance methods

  • Select.Filter# filter( List<sObject> newRecords )
    • List<sObject>

Execute the filter on the list of records, returning the list of sObjects matching the filter's predicate.

List<sObject> filteredRecords = nameChanged.filter( Trigger.new )
  • Select.Filter# filter( List<sObject> newRecords, Map<Id, sObject> oldRecords )
    • List<sObject>

Execute the filter on the list of records and the map of associated old records, returning the list of sObjects matching the filter's predicate.

List<sObject> filteredRecords = nameChanged.filter( Trigger.new, Trigger.oldMap )
  • Select.Filter# andx( Select.Filter otherFilter )
    • Select.Filter

Returns a filter that is the conjunction of this filter and the other filter. The returned filter only allows through sObjects matching both source filters.

Select.Filter nameNulled = nameChanged.andx( nameNull )
  • Select.Filter# orx( Select.Filter otherFilter )
    • Select.Filter

Returns a filter that is the disjunction of this filter and the other filter. The returned filter allows through all sObjects matching either source filter.

Select.Filter fooOrBar = nameEqualsFoo.orx( nameEqualsBar )
  • Select.Filter# notx()
    • Select.Filter

Returns a filter that is the logical inverse of this filter. The returned filter allows through only sObjects not matching the source filter.

Select.Filter notFoo = isFoo.notx()

built-in filters

Select.Field - basic field criteria

All field parameters for the built-in filters can be specified as a String or as a Schema.sObjectField. For more information see the FieldReference documentation below.

  • Select.Field. hasChanged( field )
    • Select.Filter

Filter for sObjects that have an updated value in the given field, or in the insert case, have any non-null value.

Select.Filter nameChanged = Select.Field.hasChanged( Account.Name )
  • Select.Field. isNew( field )
    • Select.Filter

Filter for sObjects that have a non-null value in the given field where previously the field was null, or in the insert case have any non-null value.

Select.Filter newPhone = Select.Field.isNew( Contact.Phone )
  • Select.Field. isEqual( field, value )
    • Select.Filter

Filter for sObjects that have the specified value in the given field.

Select.Filter nameIsFoobar = Select.Field.isEqual( Account.Name, 'Foobar' )
  • Select.Field. notEqual( field, value )
    • Select.Filter

Filter for sObjects that do not have the specified value in the given field.

Select.Filter nameIsntFoobar = Select.Field.notEqual( Account.Name, 'Foobar' )
  • Select.Field. isIn( field, collection )
    • Select.Filter

Filter for sObjects with a field value contained in the set or list of specified values.

Select.Filter isMidwest = Select.Field.isIn( Account.BillingState, midwestStates )
  • Select.Field. notIn( field, collection )
    • Select.Filter

Filter for sObjects with a field value not contained in the set or list of specified values.

Select.Filter notMidwest = Select.Field.notIn( Account.BillingState, midwestStates )
  • Select.Field. isNull( field )
    • Select.Filter

Filter for sObjects with null in the given field.

Select.Filter blankPhone = Select.Field.isNull( Contact.Phone )
  • Select.Field. notNull( field )
    • Select.Filter

Filter for sObjects with a non-null value in the given field.

Select.Filter hasPhone = Select.Field.notNull( Contact.Phone )
  • Select.Field. startsWith( field, prefix )
    • Select.Filter

Filter for sObjects with a prefix on the given field.

Select.Filter nameStartsWithFoo = Select.Field.startsWith( Contact.Name, 'Foo' )
  • Select.Field. endsWith( field, suffix )
    • Select.Filter

Filter for sObjects with a suffix on the given field.

Select.Filter nameEndsWithBar = Select.Field.endsWith( Contact.Name, 'Bar' )
  • Select.Field. contains( field, infix )
    • Select.Filter

Filter for sObjects with a value contained in the given field.

Select.Filter nameContainsBaz = Select.Field.contains( Contact.Name, 'Baz' )
  • Select.Field. hasChildren( String childRelationship )
    • Select.Filter

Filter for sObjects with a value less than the given value of the field.

Select.Filter lessThan = Select.Field.lessThan( Opportunity.Amount, 100 )

Filter for sObjects with a value greater than the given value of the field.

Select.Filter lessThan = Select.Field.greaterThan( Opportunity.Amount, 100 )

Filter for sObjects with child records for the given child relationship.

Select.Filter hasChildren = Select.Field.hasChildren( 'Contacts' )
  • Select.Field. hasNoChildren( String childRelationship )
    • Select.Filter

Filter for sObjects without child records for the given child relationship.

Select.Filter hasNoChildren = Select.Field.hasNoChildren( 'Contacts' )

Select.Record - record-level criteria

  • Select.Record. isNew()
    • Select.Filter

Filter for records that are new.

Select.Filter isNew = Select.Record.isNew()
  • Select.Record. notNew()
    • Select.Filter

Filter for records that are not new.

Select.Filter notNew = Select.Record.notNew()
  • Select.Record. byId( Id searchId )
    • Select.Filter

Filter for records matching the given Id.

Select.Filter chosenRecord = Select.Record.byId( recordId )
  • Select.Record. notId( Id searchId )
    • Select.Filter

Filter for records that don't have the given Id.

Select.Filter otherRecords = Select.Record.notId( recordId )
  • Select.Record. byName( String searchName )
    • Select.Filter

Filter for records matching the given Name.

Select.Filter johnDoes = Select.Record.byName( 'John Doe' )
  • Select.Record. notName( String searchName )
    • Select.Filter

Filter for records that don't have the given Name.

Select.Filter noHomers = Select.Record.notName( 'Homer' )
  • Select.Record. isOrphan( String lookupField )
    • Select.Filter

Filter for records that do not have a parent record for the given relationship.

Select.Filter orphans = Select.Record.isOrphan( 'Company' )
  • Select.Record. notOrphan( String lookupField )
    • Select.Filter

Filter for records that have a parent record for the given relationship.

Select.Filter orphans = Select.Record.notOrphan( 'Company' )

Select.Records - filter combinators and constant filters

  • Select.Records. all()
    • Select.Filter

Constant filter that returns all records.

Select.Filter filterForTesting = Select.Records.all()
  • Select.Records. none()
    • Select.Filter

Constant filter that returns no records.

Select.Filter filterForTesting = Select.Records.none()
  • Select.Records. both( Select.Filter one, Select.Filter other )
    • Select.Filter

Composite filter for both the given filters. Equivalent to calling Filter#andx.

Select.Filter nameNulled = Select.Records.both( nameChanged, nameNull )
  • Select.Records. all( List<Select.Filter> many )
    • Select.Filter

Composite filter for all the given filters. Equivalent to calling Filter#andx for each of the filters.

Select.Filter specificFilter = Select.Records.all( myCriteria )
  • Select.Records. either( Select.Filter one, Select.Filter other )
    • Select.Filter

Composite filter for either of the given filters. Equivalent to calling Filter#orx.

Select.Filter nameChangedOrNull = Select.Records.either( nameChanged, nameNull )
  • Select.Records. any( List<Select.Filter> many )
    • Select.Filter

Composite filter for any of the given filters. Equivalent to calling Filter#orx for each of the filters.

Select.Filter generalFilter = Select.Records.any( myCriteria )

constructors

  • new Select. Filter( Select.Predicate predicate )

Create a new filter with the given predicate.

 Select.Filter customFilter = new Select.Filter( customPredicate )

Predicate interface

To write a custom filter predicate, implement the interface Select.Predicate, which consists of an evaluate method for the insert case and one for the update case.

  • Select.Predicate# evaluate( sObject newRecord )
    • Boolean

Should return whether or not to include the given record in the filtered results. Represents the insert case of a trigger.

  • Select.Predicate# evaluate( sObject newRecord, sObject oldRecord )
    • Boolean

Should return whether or not to include the given record in the filtered results. Represents the update case of a trigger.

For examples of Predicate implementations, see the built-in predicates.

InsertPredicate abstract class

If you don't need special-case logic for the update case, extend this class instead. That way you only need to implement the first signature of the evaluate method which takes only a single sObject instance.

FieldReference abstract class

Represents an abstract reference to an sObject field. It uses inversion of control to allow the library to get the value of an sObject field without knowing whether the reference is a String or a Schema.sObject field.

  • Select.FieldReference# getFrom( sObject record )
    • Object

Returns the value of the referenced field on the given sObject.

Id accountId = (Id)idReference.getFrom( theAccount )

FieldReference factory methods

  • Select.FieldReference. build( Schema.sObjectField field )
    • Select.FieldReference

Returns a FieldReference encapsulating the given field.

Select.FieldReference idRef = Select.FieldReference.build( Account.Id )
  • Select.FieldReference. build( String field )
    • Select.FieldReference

Returns a FieldReference encapsulating the field represented by the given string. If there is no '.' character, the reference behaves as it would with the equivalent Schema reference (and it would be safer to use that). If the given string contains a period, the reference will traverse sObject relationships as expected.

Select.FieldReference parentAccountIdRef = Select.FieldReference.build( 'Account.Id' );

The difference between idRef and parentAccountIdRef is that the former would be used directly on the Account object, whereas the latter could be used on any child object with a lookup named 'Account'.