Running the STUN server:
------------------------
You need to have 2 IP addresses next to each other or
have 2 hosts and each of them have 1 IP address to run the STUN server.
If you have 2 IP addresses next to each other on the same host, you can:
./stun_server -h primary-ip -a secondary-ip -b
If you have 2 hosts and each of them have 1 IP address, you can:
./stun_server -h primary-ip -u secondary-ip(pub)/secondary-ip(priv) -b
STUN server version 0.97
Usage:
./stun_server [-v] [-h] [-e] [s] [-h IP_Address] [-a IP_Address] [-u IP_Address/IP_Address]
[-p port] [-o port] [-d port] [-m mediaport]
If the IP addresses of your NIC are 10.0.1.150 and 10.0.1.151, run this program with
./stun_server -v -h 10.0.1.150 -a 10.0.1.151
If the IP addresses of one of your host is 172.16.10.55. There is another host, of which the NIC
is 172.16.10.59, and there is a public IP address 123.45.32.76 being bind to it, run this
program with
./stun_server -b -h 172.16.10.55 -u 123.45.32.76/172.16.10.59
STUN servers need two IP addresses and two ports, these can be specified with:
-e whether receive msg with epoll mechanism
-s whether display statistics logs
-h sets the primary IP
-a sets the secondary IP
-u sets the unbind secondary IP
-p sets the primary port and defaults to 3478
-o sets the secondary port and defaults to 3479
-d sets the unbind secondary communication port and defaults to 3481
-b makes the program run in the background
-m sets up a STERN server starting at port m
-s runs in verbose statistics mode
-v runs in verbose mode