kbr-net/sdrive-max

Issues

• Recognition of ATR files with 512 bytes per sector512 bytes per sector

  #62 opened 9 months ago by Kaz6502
  1

• Are there build instructions around?

  #61 opened a year ago by mattlacey
  1

• eeprom_writer.hex missing from github, no instructions on dependencies required to build

  #59 opened 4 months ago by e474
  1

• Most newer SD cards does not initialize

  #53 opened 2 years ago by StmLord
  15

• V1.3 problem with hx8347i display

  #60 opened a year ago by StmLord
  0

• UI bug with disk image selection

  #58 opened 2 years ago by TzOk83
  2

• Suggestions for the SDrive.(bad tape image)

  #48 opened 2 years ago by Carmelojp
  4

• Missing Motor-ON line for tape emulation

  #33 opened 5 years ago by TzOk83
  10

• Are there any working displays with autotouch feature?

  #40 opened 2 years ago by kbr-net
  3

• SDrive_max Screen Display Mirrored ILI9341

  #56 opened 2 years ago by overanged
  4

• Strange behavior with VMA412 screen

  #54 opened 2 years ago by cx1976
  1

• NAK while writing to ATR images

  #52 opened 3 years ago by Gitbizy
  1

• WAVGAT UNO R3

  #51 opened 3 years ago by mamejay
  3

• Can this work with a Duemilanove?

  #50 opened 3 years ago by cvincross
  1

• ILI9325 - touch screen and SD card reading not working

  #49 opened 3 years ago by jopl
  1

• Physical Drive Disk Copy Question

  #15 opened 5 years ago by iCityWork
  5

• Using Atari DOS 2.0D (double density version) new command creates single density sized blank disk

  #47 opened 4 years ago by s-simpson
  6

• Documentation for sdrive.com??? anywhere?

  #36 opened 5 years ago by jedimatt42
  6

• load cas at more than 800 baud

  #45 opened 4 years ago by a8dogdark
  2

• Support for DD (180K) Disk Creation and Formatting

  #32 opened 4 years ago by LameLefty
  2

• support for reading baud

  #35 opened 5 years ago by ascrnet
  2

• Screen Colour inverted? atmega328-ili9340

  #18 opened 5 years ago by mamejay
  20

• Touch Screen autodetection with sdrive-max-v12c3 atmega328-ili9329

  #44 opened 5 years ago by mamejay
  4

• Cannot get any display using any of the hex code

  #29 opened 5 years ago by mamejay
  8

• Screenless mode - button to cycle through D1 - D4

  #41 opened 5 years ago by TzOk83
  4

• Screen autodetection still doesn't work in v1.2c2.

  #39 opened 5 years ago by TzOk83
  14

• Problem after flash.

  #37 opened 5 years ago by pasmoi87
  25

• MCUFRIEND ILI9340 display issues

  #30 opened 5 years ago by TzOk83
  6

• No touch on a 9340

  #19 opened 5 years ago by mamejay
  5

• Screenless mode

  #27 opened 5 years ago by TzOk83
  2

• LED

  #20 opened 5 years ago by iCityWork
  7

• help HX8347I

  #25 opened 5 years ago by ascrnet
  7

• Genneral use of ILI94XX series

  #28 opened 5 years ago by bweiser
  2

• XPT2046 touchscreen support

  #26 opened 5 years ago by TzOk83
  3

• Supported display types

  #24 opened 5 years ago by pavelru
  37

• How to add support to a new display?

  #22 opened 5 years ago by jfsantos
  3

• ili9338 touchscreen (Mcufriends)

  #21 opened 5 years ago by crenedecotret
  5

• Creating New disks doesn't respect drive setting.

  #17 opened 5 years ago by a8bit
  7

• PC-Link support

  #13 opened 5 years ago by e474
  2

• Physical drive present

  #12 opened 5 years ago by e474
  2

• Change to remove need for diode on TxD

  #11 opened 5 years ago by darylrichards
  7

• HX8347I LCD driver Support

  #9 opened 6 years ago by iCityWork
  20

• Add pause between cross-hair display during screen calibration

  #10 opened 6 years ago by e474
  2