keebio/iris-case

Issues

• Ergodox tent kit with Rev-8 board breaks off transistor

  #44 opened 7 months ago by ptdewey
  1

• The 3mm Iris PE switch plate file is scaled incorrectly

  #43 opened a year ago by arminAnderson
  0

• PE Middle Layer USB

  #41 opened 2 years ago by derpmcgerp1080p
  2

• PE Middle Layer Tent Kit Updates

  #40 opened 2 years ago by derpmcgerp1080p
  1

• Can't get dxf files to load in OpenSCAD

  #39 opened 2 years ago by ThatZaliaSGuy
  0

• [Request] Upload files that made the STLs for Phoenix Edition middle layers

  #37 opened 3 years ago by Zomgnomes
  1

• The indentations for nuts in the middle layer for Ergodox tenting kit are too large

  #35 opened 3 years ago by vjraitila
  0

• Can't open case files

  #34 opened 3 years ago by ZachariahPang
  0

• Iris R4 Middle Layer - Ergodox Tent Kit for 3mm Plate does not have holes that go all the way through

  #33 opened 3 years ago by NekoNoor
  1

• Switch plate hole size

  #32 opened 3 years ago by ThreepE0
  2

• No middle layer can be resized to 153.7mm x 132.5mm

  #29 opened 4 years ago by NSCoder
  2

• REQUEST: higher poly stl files

  #20 opened 4 years ago by jocelynmallon
  11

• Plate cover case

  #25 opened 4 years ago by guestisp
  1

• Which screws to use for the Hi-Pro Top Full shell?

  #28 opened 4 years ago by jezdez
  1

• iris rev3 printed case

  #30 opened 4 years ago by Fl0GUI
  0

• Files for tent-able middle layers please

  #2 opened 7 years ago by jimmyhchan
  2

• [REQUEST] rev. 3 right half middle layers

  #24 opened 5 years ago by nstetter
  1

• Creating middle layer stl file for the opposite hand

  #23 opened 5 years ago by take
  1

• Issue with the 3-D Case

  #21 opened 5 years ago by jruaaa
  3

• Update README for tented case

  #7 opened 5 years ago by kevinduffey
  1

• Update README to indicate that left and right side are identical cuts

  #8 opened 5 years ago by kevinduffey
  1

• Middle layer STL file chirality.

  #18 opened 5 years ago by keunhong
  1

• How long are all the paths in your design combined?

  #3 opened 7 years ago by danielo515
  4

• Middle layer tent has different dimensions in Sculpteo

  #9 opened 7 years ago by kevinduffey
  2

• Ponoko stroke width?

  #5 opened 7 years ago by gwerbin
  3

• No interior screw plans

  #4 opened 7 years ago by t-taylor
  1

• Confirm dimensions for sculpteo

  #6 opened 7 years ago by Jennetters
  1