keiya-nobuta/meta-bosch-sw

How to Build

1. Checkout branch that matches poky version, for example:

$ git checkout hardknott

2. Before bitbake, check the kernel configuration to see if CONFIG_SPI=y,

$ bitbake -c menuconfig linux-yocto

check below:

Device Drivers -->
  [*] SPI support

3. type bitbake command

$ bitbake -c bosch-iccom

Enablement

1. Bosch iccom current implementation depends on symspi, and symspi needs Device-Tree nodes, for example:

symspi1: symspi1@0 {
	reg = <0>;      /* CE0 */
	#address-cells = <1>;
	#size-cells = <0>;
	spi-max-frequency = <125000000>;
	compatible = "bosch,symspi1";
	symspi-hsk-out-gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
	symspi-hsk-in-gpios = <&gpio 27 GPIO_ACTIVE_HIGH>;
};