boot_format =========== This is a tool to write SD bootable images to a filesystem and build SD/SPI images to a binary file for writing later. Building ======== Run the following to build this project $ make Execution ========= Execute boot_format as follows. For building SD images by writing directly to a file system on SD media: $ boot_format $config u-boot.bin -sd $device Where $config is the included config.dat file for your platform and $device is the target block device for the SD media on your computer. For build binary images directly a local file: $ boot_format $config u-boot.bin -spi $file Where $file is the target file. Also keep in mind the u-boot.bin file needs to be the u-boot built for your particular platform and target media. Hint: To generate a u-boot.bin for a P1020RDB booting from SD I would run the following in the u-boot repository: $ make P1020RDB_SDCARD Configuration Files =================== Below are the configuration files to be used with a particular platform. Keep in mind that some of these config files are tied to the platforms DDR speed. Please see the SoC reference manual for more documentation. P2020DS config_sram_p2020ds.dat P2010DS config_sram_p2020ds.dat P2020RDB config_ddr3_1gb_64bit_p2020rdb_pc.dat P2010RDB config_ddr3_1gb_64bit_p2020rdb_pc.dat P1020RDB config_ddr3_1gb_p1_p2_rdb_pc_800M.dat P1011RDB config_ddr3_1gb_p1_p2_rdb_pc_800M.dat P1010RDB config_ddr3_1gb_p1010rdb_800M.dat P1014RDB config_ddr3_1gb_p1014rdb_800M.dat P1021RDB config_ddr3_1gb_p1_p2_rdb_pc_800M.dat P1012RDB config_ddr3_1gb_p1_p2_rdb_pc_800M.dat P1022DS config_ddr3_2gb_p1022ds.dat P1013DS config_ddr3_2gb_p1022ds.dat P1024RDB config_ddr3_1gb_p1_p2_rdb_pc_667M.dat P1013RDB config_ddr3_1gb_p1_p2_rdb_pc_667M.dat P1025RDB config_ddr3_1gb_p1_p2_rdb_pc_667M.dat P1016RDB config_ddr3_1gb_p1_p2_rdb_pc_667M.dat P1020UTM config_ddr3_1gb_p1_p2_rdb_pc_800M.dat P1020MBG config_ddr3_1gb_p1_p2_rdb_pc_800M.dat MPC8536DS config_ddr2_512m_mpc8536ds_667M.dat