wireguard_ansible

This is the ansible automation of the Wireguard VPN set up described here https://www.ckn.io/blog/2017/11/14/wireguard-vpn-typical-setup/

This will create ten VPN client profiles when done.

This project has also been restructured as an ansible role for inclusion in other ansible playbooks.

Requirements

This assumes an ubuntu 16.04 or 18.04 client. It should also work on other platforms with minimal tweaking.

Install git

sudo apt-get install git

Install ansible

sudo apt-add-repository ppa:ansible/ansible -y
sudo apt-get update && sudo apt-get install ansible -y

For optimal use, use ansible version greater than 2.5

Server set up

This assumes you have an Ubuntu 16.04 server with ssh access on port 22. Ensure that you've already added the server key to your known hosts file by sshing into it at least once. If you are using an SSH key, then you can forgo that.

Quick setup

On the client

git clone https://github.com/iamckn/wireguard_ansible
cd wireguard_ansible

Edit the hosts file in that folder and fill in the IP field with the VPN server IP

Begin the remote installation process by running

ansible-playbook wireguard.yml -u root -k -i hosts

If you're using an SSH key for authentication run this instead

ansible-playbook wireguard.yml -u root -i hosts

Give it a few minutes and the server set up will be complete.

Ten client configs will be created on the VPN server in the folder /root/wg_clients. They will also be downloaded to the wireguard_role/profiles folder on your local host.

Assuming you're using the first client config, copy it to /etc/wireguard/ and you can start using the VPN tunnel on your client.

To bring up the VPN interface

sudo wg-quick up wg0-client

To bring down the VPN interface

sudo wg-quick down wg0-client

To view connection details

sudo wg show

Advanced use

You have the option of determining the vpn network subnet you prefer your clients to use by editing the file wireguard_role/defaults/main.yml, and setting the vpn_network variable as desired. You can also change the vpn server port and the number of client profiles you want generated in the same file:

vpn_network: '10.200.200'

vpn_port: '51820'

clients: 10

Adding a client

If you want to generate an additional client profile in future, edit the following two variables in wireguard_role/tasks/main.yml to your specific needs:

    new_client: newclient
    new_client_ip: 10.200.200.12

Then run the setup process again but now with the tag add_client specified:

ansible-playbook wireguard.yml -u root -k -i hosts -t add_client

The new client config will then be downloaded to the wireguard_role/profiles folder on your local host.

Note: This needs to be run from the directory the initial setup was done from and not from a newly cloned one.

Use as an ansible role

This project has been structured as an ansible role. You can therefore include it in other ansible playbooks

- name: Setup Wireguard VPN
  hosts: all
  gather_facts: true
  roles:
    - {role: 'wireguard_role', tags: 'wireguard'}

DNS

If there is another service listening on port 53, you will have issues with getting DNS resolution working. It is therefore advisable to either disable or change the port of any service already using port 53. This will automatically be handled for you on Ubuntu 18.04 when you run this playbook.

kerouanton/wireguard_ansible