NAME
Module::Install - Standalone, extensible Perl module installer
SYNOPSIS
In your Makefile.PL: (Recommended Usage)
use inc::Module::Install;
# Define metadata
name 'Your-Module';
all_from 'lib/Your/Module.pm';
# Specific dependencies
requires 'File::Spec' => '0.80';
test_requires 'Test::More' => '0.42';
recommends 'Text::CSV_XS'=> '0.50';
no_index 'directory' => 'demos';
install_script 'myscript';
WriteAll;
Quickly upgrade a legacy ExtUtil::MakeMaker installer:
use inc::Module::Install;
WriteMakefile( ... );
DESCRIPTION
Module::Install is a package for writing installers for CPAN (or
CPAN-like) distributions that are clean, simple, minimalist, act in a
strictly correct manner with ExtUtils::MakeMaker, and will run on any
Perl installation version 5.005 or newer.
The intent is to make it as easy as possible for CPAN authors (and
especially for first-time CPAN authors) to have installers that follow
all the best practices for distribution installation, but involve as
much DWIM (Do What I Mean) as possible when writing them.
Writing Module::Install Installers
The quickest way to get started with Module::Install is to copy the
"SYNOPSIS" from above and save it as your own Makefile.PL. Then modify
the file to suit your own particular case, using the list of commands
documented in "COMMON COMMANDS" below.
If all you want to do is write an installer, go and do that now. You
don't really need the rest of this description unless you are interested
in the details.
How it Works
The motivation behind Module::Install is that distributions need to
interact with a large number of different versions of perl and module
installers infrastructure, primarily CPAN.pm, CPANPLUS.pm,
ExtUtils::MakeMaker and Module::Build.
These have accumulated greatly varying feature and bug profiles over the
years, and it is now very difficult to write an installer that will work
properly using only the installed versions of these modules,
For example, the CPAN.pm version shipped with Perl 5.005 is now 5+ years
old and considered highly buggy, yet it still exists on quite a number
of legacy machines.
Rather than try to target one specific installer and/or make you add
twisty workaround expressions to every piece of install code you write,
Module::Install will copy part of itself into each module distribution
it creates.
This allows new improvements to be used in your installers regardless of
the age of the system a distribution is being installed on, at the cost
of a small increase in the size of your distribution.
History
This module was originally written by Brian Ingerson as a smart drop-in
replacement for ExtUtils::MakeMaker.
For more information, see Brian's *Creating Module Distributions with
Module::Install* in June 2003 issue of The Perl Journal
(<http://www.tpj.com/issues/>).
For a lot more information, and some personal opinions on the module and
its creation, see Module::Install::Philosophy.
COMMON COMMANDS
The following are the most common commands generally used in installers.
It is far from an exhaustive list, as many of the plugins provide
commands to work in more details that you would normally need.
name
name 'My-Module';
The name command is compulsory command, generally the first.
It provides the name of your distribution, which for a module like
Your::Module would normally be "Your-Module".
This naming scheme is not hard and fast and you should note that
distributions are actually a separate naming scheme from modules.
For example the LWP modules come in a distribution called "libwww-perl".
all_from
all_from 'lib/My/Module.pm';
For most simple Perl distributions that feature one dominant module or
class as the base, you can get the most Do What I Mean functionality by
using the all_from command, which will try to extract as much metadata
as possible from the Perl code and POD in that primary module.
Functionally, "all_from" is equivalent to "abstract_from" +
"author_from" + "version_from" + "license_from" + "perl_version_from".
See below for details.
If any of these values are set already before "all_from" is used, they
will kept and not be overwritten.
abstract
abstract 'This distribution does something';
All distributions have an abstract, a short description of the
distribution as a whole. It is usually around 30-70 characters long.
The "abstract" command is used to explicitly set the abstract for the
distribution, at least as far as the metadata file for the distribution
is concerned.
abstract_from
abstract_from 'lib/My/Module.pm';
The "abstract_from" command retrieves the abstract from a particular
file contained in the distribution package. Most often this is done from
the main module, where "Module::Install" will read the POD and use
whatever is in the "=head1 NAME" section (with module name stripped if
needed)
"abstract_from" is set as part of "all_from".
author
author 'Adam Kennedy <adamk@cpan.org>';
The distribution metadata contains information on the primary author or
the distribution, or the primary maintainer if the original author is no
longer involved. It should generally be specified in the form of an
email address.
It you don't want to give away a real email address, you should use the
"CPANID@cpan.org" address you receive automatically when you got your
PAUSE account.
The "author" command is used to explicitly set this value.
author_from
author_from 'lib/My/Module.pm';
The "author_from" command retrieves the author from a particular file
contained in the distribution package. Most often this is done using the
main module, where Module::Install will read the POD and use whatever it
can find in the "=head1 AUTHOR" section.
version
version '0.01';
The "version" command is used to specify the version of the
distribution, as distinct from the version of any single module within
the distribution.
Of course, in almost all cases you want it to match the version of the
primary module within the distribution, which you can do using
"version_from".
version_from
version_from 'lib/My/Module.pm';
The "version_from" command retrieves the distribution version from a
particular file contained in the distribution package. Most often this
is done from the main module.
"version_from" will look for the first time you set $VERSION and use the
same value, using a technique consistent with various other module
version scanning tools.
license
license 'perl';
The "license" command specifies the license for the distribution.
Most often this value will be 'perl', meaning *"the same as for Perl
itself"*. Other allowed values include 'gpl', 'lgpl', 'bsd', 'MIT', and
'artistic'.
This value is always considered a summary, and it is normal for authors
to include a LICENSE file in the distribution, containing the full
license for the distribution.
You are also reminded that if the distribution is intended to be
uploaded to the CPAN, it must be an OSI-approved open source license.
Commercial software is not permitted on the CPAN.
license_from
license_from 'lib/My/Module.pm';
The "license_from" command retrieves the distribution license from a
particular file contained in the distribution package. Most often this
is done from the main module.
"license_from" will look inside the POD within the indicated file for a
licensing or copyright-related section and scan for a variety of strings
that identify the general class of license.
At this time it supports only the 6 values mentioned above in the
"license" command summary.
perl_version
perl_version '5.006';
The "perl_version" command is used to specify the minimum version of the
perl interpreter your distribution requires.
When specifying the version, you should try to use the normalized
version string. Perl version segments are 3 digits long, so a dependency
on Perl 5.6 will become '5.006' and Perl 5.10.2 will become '5.010002'.
perl_version_from
perl_version_from 'lib/My/Module.pm'
The "perl_version_from" command retrieves the minimum perl interpreter
version from a particular file contained in the distribution package.
Most often this is done from the main module.
The minimum version is detected by scanning the file for "use 5.xxx"
pragma calls in the module file.
recommends
recommends 'Text::CSV_XS' => '0.50'
The "recommends" command indicates an optional run-time module that
provides extra functionality. Recommended dependencies are not needed to
build or test your distribution, but are considered "nice to have".
As with "requires", the dependency is on a module and not a
distribution. A version of zero indicates that any version of the module
is recommended.
requires
requires 'List::Util' => 0;
requires 'LWP' => '5.69';
The "requires" command indicates a normal run-time dependency of your
distribution on another module. Most distributions will have one or more
of these commands, indicating which CPAN (or otherwise) modules your
distribution needs.
A "requires" dependency can be verbalised as *"If you wish to install
and use this distribution, you must first install these modules first"*.
Note that the dependency is on a module and not a distribution. This is
to ensure that your dependency stays correct, even if the module is
moved or merged into a different distribtion, as is occasionally the
case.
A dependency on version zero indicates any version of module is
sufficient. Versions should generally be quoted for clarity.
test_requires
test_requires 'Test::More' => '0.47';
The "test_requires" command indicates a test script dependency for the
distribution. The specification format is identical to that of the
"requires" command.
The "test_requires" command is distinct from the "requires" command in
that it indicates a module that is needed only during the testing of the
distribution (often a period of only a few seconds) but will not be
needed after the distribution is installed.
The "testrequires" command is used to allow the installer some
flexibility in how it provides the module, and to allow downstream
packagers (Debian, FreeBSD, ActivePerl etc) to retain only the
dependencies needed for run-time operation.
The "include" command is sometimes used by some authors along with
"test_requires" to bundle a small well-tested module into the
distribution package itself rather than inflict yet another module
installation on users installing from CPAN directly.
configure_requires
configure_requires 'File::Spec' => '0.80';
The "configure_requires" command indicates a configure-time dependency
for the distribution. The specification format is identical to that of
the "requires" command.
The "configure_requires" command is used to get around the conundrum of
how to use a CPAN module in your Makefile.PL, when you have to load
Makefile.PL (and thus the CPAN module) in order to know that you need
it.
Traditionally, this circular logic could not be broken and so
Makefile.PL scripts needed to rely on lowest-common-denominator
approaches, or to bundle those dependencies using something like the
"include" command.
The "configure_requires" command creates an entry in the special
configure_requires: key in the distribution's META.yml file.
Although most of META.yml is considered advisory only, a CPAN client
will treat the contents of configure_requires: as authorative, and
install the listed modules before it executes the Makefile.PL (from
which it then determines the other dependencies).
Please note that support for configure_requires: in CPAN clients is not
100% complete at time of writing, and still cannot be relied upon.
Because Module::Install itself only supports 5.005, it will silently add
the equivalent of a "configure_requires( perl => '5.005' );" command to
your distribution.
requires_external_bin
requires_external_bin 'cvs';
As part of its role as the dominant "glue" language, a lot of Perl
modules run commands or programs on the host system.
The "requires_external_bin" command is used to verify that a particular
command is available on the host system.
Unlike a missing Perl module, a missing external binary is unresolvable
at make-time, and so the Makefile.PL run will abort with a "NA" (Not
Applicable) result.
In future, this command will also add additional information to the
metadata for the dist, so that auto-packagers for particular operating
system are more-easily able to auto-discover the appropriate non-Perl
packages needed as a dependency.
install_script
# The following are equivalent
install_script 'script/scriptname'
The "install_script" command provides support for the installation of
scripts that will become available at the console on both Unix and
Windows (in the later case by wrapping it up as a .bat file).
Note that is it normal practice to not put a .pl on the end of such
scripts, so that they feel more natural when being used.
In the example above, the script/scriptname program could be run after
the installation just by doing the following.
> scriptname
Running scriptname 0.01...
>
By convention, scripts should be placed in a /script directory within
your distribution. To support less typing, if a script is located in the
script directory, you need refer to it by name only.
# The following are equivalent
install_script 'foo';
install_script 'script/foo';
no_index
no_index directory => 'examples';
no_index package => 'DB';
Quite often a distrubition will provide example scripts or testing
modules (.pm files) as well as the actual library modules.
In almost all situations, you do not want these indexed in the CPAN
index, the master Perl packages list, or displayed on the
<http://search.cpan.org/> website, you just want them along for the
ride.
The "no_index" command is used to indicate directories or files where
there might be non-library .pm files or other files that the CPAN
indexer and websites such as <http://search.cpan.org/> should explicitly
ignore.
The most common situation is to ignore example or demo directories, but
a variety of different situations may require a "no_index" entry.
Another common use for "no_index" is to prevent the PAUSE indexer
complaining when your module makes changes inside a "package DB" block.
This is used to interact with the debugger in some specific ways.
See the META.yml documentation for more details on what "no_index"
values are allowed.
The inc, t and share (if "install_share" is used) directories are
automatically "no_index"'ed for you if found and do not require an
explicit command.
To summarize, if you can see it on <http://search.cpan.org/> and you
shouldn't be able to, you need a "no_index" entry to remove it.
installdirs, install_as_*
installdirs 'site'; # the default
install_as_core; # alias for installdirs 'perl'
install_as_cpan; # alias for installdirs 'site'
install_as_site; # alias for installdirs 'site'
install_as_vendor; # alias for installdirs 'vendor'
The "installdirs" and "install_as" commands specify the location where
the module should be installed; this is the equivalent to
ExtUtils::MakeMaker's "INSTALLDIRS" option. For almost all regular
modules, the default is recommended, and need not be changed. Dual-life
(core and CPAN) modules, as well as vendor-specific modules, may need to
use the other options.
If unsure, do not use this option.
WriteAll
The "WriteAll" command is generally the last command in the file; it
writes out META.yml and Makefile so the user can run the "make", "make
test", "make install" install sequence.
EXTENSIONS
All extensions belong to the Module::Install::* namespace, and inherit
from Module::Install::Base. There are three categories of extensions:
Standard Extensions
Methods defined by a standard extension may be called as plain functions
inside Makefile.PL; a corresponding singleton object will be spawned
automatically. Other extensions may also invoke its methods just like
their own methods:
# delegates to $other_extension_obj->method_name(@args)
$self->method_name(@args);
At the first time an extension's method is invoked, a POD-stripped
version of it will be included under the inc/Module/Install/ directory,
and becomes *fixed* -- i.e., even if the user had installed a different
version of the same extension, the included one will still be used
instead.
If the author wish to upgrade extensions in inc/ with installed ones,
simply run "perl Makefile.PL" again; Module::Install determines whether
you are an author by the existence of the inc/.author/ directory.
End-users can reinitialize everything and become the author by typing
"make realclean" and "perl Makefile.PL".
Private Extensions
Those extensions take the form of Module::Install::PRIVATE and
Module::Install::PRIVATE::*.
Authors are encouraged to put all existing Makefile.PL magics into such
extensions (e.g. Module::Install::PRIVATE for common bits;
Module::Install::PRIVATE::DISTNAME for functions specific to a
distribution).
Private extensions should not to be released on CPAN; simply put them
somewhere in your @INC, under the "Module/Install/" directory, and start
using their functions in Makefile.PL. Like standard extensions, they
will never be installed on the end-user's machine, and therefore never
conflict with other people's private extensions.
Administrative Extensions
Extensions under the Module::Install::Admin::* namespace are never
included with the distribution. Their methods are not directly
accessible from Makefile.PL or other extensions; they are invoked like
this:
# delegates to $other_admin_extension_obj->method_name(@args)
$self->admin->method_name(@args);
These methods only take effect during the *initialization* run, when
inc/ is being populated; they are ignored for end-users. Again, to
re-initialize everything, just run "perl Makefile.PL" as the author.
Scripts (usually one-liners in Makefile) that wish to dispatch AUTOLOAD
functions into administrative extensions (instead of standard
extensions) should use the Module::Install::Admin module directly. See
Module::Install::Admin for details.
EXTENSIONS
Detailed information is provided for all (some) of the relevant modules
via their own POD documentation.
Module::Install::AutoInstall
Provides "auto_install()" to automatically fetch and install
prerequisites.
Module::Install::Base
The base class for all extensions
Module::Install::Bundle
Provides the "bundle" family of commands, allowing you to bundle another
CPAN distribution within your distribution.
Module::Install::Fetch
Handles install-time fetching of files from remote servers via FTP and
HTTP.
Module::Install::Include
Provides the "include" family of commands for embedding modules that are
only need at build-time in your distribution and won't be installed.
Module::Install::Inline
Provides "&Inline->write" to replace Inline::MakeMaker's functionality
for making Inline-based modules (and cleaning up).
However, you should invoke this with "WriteAll( inline => 1 )".
Module::Install::Makefile
Provides "&Makefile->write" to generate a Makefile for you distribution.
Module::Install::Metadata
Provides "&Meta->write" to generate a META.yml file for your
distribution.
Module::Install::PAR
Makes pre-compiled module binary packages from the built blib directory,
and download existing ones to save recompiling.
Module::Install::Run
Determines if commands are available on the user's machine, and runs
them via IPC::Run3.
Module::Install::Scripts
Handles packaging and installation of scripts to various bin dirs.
Module::Install::Win32
Functions for installing modules on Win32 and finding/installing
nmake.exe for users that need it.
Module::Install::WriteAll
Provides the "WriteAll", which writes all the requires files, such as
META.yml and Makefile.
"WriteAll" takes four optional named parameters:
"check_nmake" (defaults to true)
If true, invokes functions with the same name.
*The use of this param is no longer recommended.*
"inline" (defaults to false)
If true, invokes "&Inline->write" Inline modules.
"meta" (defaults to true)
If true, writes a "META.yml" file.
"sign" (defaults to false)
If true, invokes "sign" command to digitally sign erm... something.
Module::Install::Admin::Find
Package-time functions for finding extensions, installed packages and
files in subdirectories.
Module::Install::Admin::Manifest
Package-time functions for manipulating and updating the MANIFEST file.
Module::Install::Admin::Metadata
Package-time functions for manipulating and updating the META.yml file.
Module::Install::Admin::ScanDeps
Package-time scanning for non-core dependencies via Module::ScanDeps and
Module::CoreList.
FAQ
What are the benefits of using Module::Install?
Here is a brief overview of the reasons:
* Extremely easy for beginners to learn
* Does everything ExtUtils::MakeMaker does.
* Does it with a dramatically simpler syntax.
* Automatically scans for metadata for you.
* Requires no installation for end-users.
* Guaranteed forward-compatibility.
* Automatically updates your MANIFEST.
* Distributing scripts is easy.
* Include prerequisite modules (less dependencies to install)
* Auto-installation of prerequisites.
* Support for Inline-based modules.
* Support for File::ShareDir shared data files
* Support for precompiled PAR binaries.
* Deals with Win32 install issues for you.
By greatly shrinking and simplifying the syntax, Module::Install keeps
the amount of work required to maintain your Makefile.PL files to an
absolute minimum.
And if you maintain more than one module than needs to do unusual
installation tricks, you can create a specific module to abstract away
this complexity.
Module::Install isn't at 1.00 yet, is it safe to use yet?
As long as you are going to periodically do incremental releases to get
any bug fixes and new functionality, yes.
If you don't plan to do incremental releases, it might be a good idea to
continue to wait for a while.
COOKBOOK / EXAMPLES
The following are some real-life examples of Makefile.PL files using
Module::Install.
Method::Alias
Method::Alias is a trivially-small utility module, with almost the
smallest possible Makefile.PL.
use inc::Module::Install;
name 'Method-Alias';
all_from 'lib/Method/Alias.pm';
test_requires 'Test::More' => '0.42';
File::HomeDir
File::HomeDir locates your home directory on any platform. It needs an
installer that can handle different dependencies on different platforms.
use inc::Module::Install;
name 'File-HomeDir';
all_from 'lib/File/HomeDir.pm';
requires 'File::Spec' => '0.80';
test_requires 'Test::More' => '0.47';
if ( $MacPerl::Version ) {
# Needed on legacy Mac OS 9
requires 'Mac::Files' => 0;
}
if ( $^O eq 'MXWin32' ) {
# Needed on Windows platforms
requires 'Win32::TieRegistry' => 0;
}
WriteAll;
TO DO
Implement Module::Install::Compiled and Module::Install::Admin::Compiled
to integrate the Module::Compiled "perl 6 to perl 5" functionality with
Module::Install. Because this would add SIGNIFICANT dependencies (i.e.
pugs!) this should almost certainly be distributed as a separate
distribution.
Go over POD docs in detail.
Test recursive Makefile directories
The test suite needs a great deal more test scripts.
Dependencies on shared libraries (libxml/libxml.dll etc) and binary
files so that debian/Win32/etc autopackaging applications can create the
appropriate package-level dependencies there.
EU::MM 6.06_03+ supports META.yml natively. Maybe probe for that?
SEE ALSO
Module::Install::Philosophy
inc::Module::Install
Module::Install::AutoInstall
Module::Install::Base
Module::Install::Bundle
Module::Install::MakeMaker
Module::Install::Share
Module::Install::Admin
Module::Install::Admin::Include
Module::Install::Admin::Manifest
CPAN::MakeMaker, Inline::MakeMaker
ExtUtils::MakeMaker
SUPPORT
Bugs should be reported via the CPAN bug tracker at
<http://rt.cpan.org/NoAuth/ReportBug.html?Queue=Module-Install>
For other issues, contact the (topmost) author.
AUTHORS
Adam Kennedy <adamk@cpan.org>
Audrey Tang <autrijus@autrijus.org>
Brian Ingerson <ingy@cpan.org>
COPYRIGHT
Copyright 2002 - 2011 Brian Ingerson, Audrey Tang and Adam Kennedy.
This program is free software; you can redistribute it and/or modify it
under the same terms as Perl itself.