This project is an unofficial port of awslabs/dynamodb-geo, bringing creation and querying of geospatial data to Python developers using Amazon DynamoDB.
- Box Queries: Return all of the items that fall within a pair of geo points that define a rectangle as projected onto a sphere.
- Radius Queries: Return all of the items that are within a given radius of a geo point.
- Basic CRUD Operations: Create, retrieve, update, and delete geospatial data items.
- Customizable: Access to raw request and result objects from the AWS SDK for python.
pip install s2sphere
pip install boto3
pip install dynamodbgeoFirst you'll need to import the AWS sdk and set up your DynamoDB connection:
import boto3
import dynamodbgeo
import uuid
dynamodb = boto3.client('dynamodb', region_name='us-east-2')Next you must create an instance of GeoDataManagerConfiguration for each geospatial table you wish to interact with. This is a container for various options (see API below), but you must always provide a DynamoDB instance and a table name.
config = dynamodbgeo.GeoDataManagerConfiguration(dynamodb, 'geo_test_8')Finally, you should instantiate a manager to query and write to the table using this config object.
geoDataManager = dynamodbgeo.GeoDataManager(config)The hashKeyLength is the number of most significant digits (in base 10) of the 64-bit geo hash to use as the hash key. Larger numbers will allow small geographical areas to be spread across DynamoDB partitions, but at the cost of performance as more queries need to be executed for box/radius searches that span hash keys. See these tests from the JS version(TODO) for an idea of how query performance scales with hashKeyLength for different search radii.
If your data is sparse, a large number will mean more RCUs since more empty queries will be executed and each has a minimum cost. However if your data is dense and hashKeyLength too short, more RCUs will be needed to read a hash key and a higher proportion will be discarded by server-side filtering.
From the AWS Query documentation
DynamoDB calculates the number of read capacity units consumed based on item size, not on the amount of data that is returned to an application. ... The number will also be the same whether or not you use a
FilterExpression
Optimally, you should pick the largest hashKeyLength your usage scenario allows. The wider your typical radius/box queries, the smaller it will need to be.
Note that the Java version uses a hashKeyLength of 6 by default. The same value will need to be used if you access the same data with both clients.
This is an important early choice, since changing your hashKeyLength will mean recreating your data.
From the AWS Query documentation
DynamoDB calculates the number of read capacity units consumed based on item size, not on the amount of data that is returned to an application. ... The number will also be the same whether or not you use a
FilterExpression
Optimally, you should pick the largest hashKeyLength your usage scenario allows. The wider your typical radius/box queries, the smaller it will need to be.
Note that the Java version uses a hashKeyLength of 6 by default. The same value will need to be used if you access the same data with both clients.
This is an important early choice, since changing your hashKeyLength will mean recreating your data.
GeoTableUtil has a static method getCreateTableRequest for helping you prepare a DynamoDB CreateTable request request, given a GeoDataManagerConfiguration.
You can modify this request as desired before executing it using AWS's DynamoDB SDK.
Example:
# Pick a hashKeyLength appropriate to your usage
config.hashKeyLength = 3
# Use GeoTableUtil to help construct a CreateTableInput.
table_util = dynamodbgeo.GeoTableUtil(config)
create_table_input=table_util.getCreateTableRequest()
#tweaking the base table parameters as a dict
create_table_input["ProvisionedThroughput"]['ReadCapacityUnits']=5
# Use GeoTableUtil to create the table
table_util.create_table(create_table_input)#preparing non key attributes for the item to add
PutItemInput = {
'Item': {
'Country': {'S': "Tunisia"},
'Capital': {'S': "Tunis"},
'year': {'S': '2020'}
},
'ConditionExpression': "attribute_not_exists(hashKey)" # ... Anything else to pass through to `putItem`, eg ConditionExpression
}
geoDataManager.put_Point(dynamodbgeo.PutPointInput(
dynamodbgeo.GeoPoint(36.879163, 10.243120), # latitude then latitude longitude
str( uuid.uuid4()), # Use this to ensure uniqueness of the hash/range pairs.
PutItemInput # pass the dict here
))See also DynamoDB PutItem request
Note that you cannot update the hash key, range key, geohash or geoJson. If you want to change these, you'll need to recreate the record.
You must specify a RangeKeyValue, a GeoPoint, and an UpdateItemInput dict matching the DynamoDB UpdateItem request (TableName and Key are filled in for you).
#define a dict of the item to update
UpdateItemDict= { # Dont provide TableName and Key, they are filled in for you
"UpdateExpression": "set Capital = :val1",
"ConditionExpression": "Capital = :val2",
"ExpressionAttributeValues": {
":val1": {"S": "Tunis"},
":val2": {"S": "Ariana"}
},
"ReturnValues": "ALL_NEW"
}
geoDataManager.update_Point(dynamodbgeo.UpdateItemInput(
dynamodbgeo.GeoPoint(36.879163,10.24312), # latitude then latitude longitude
"1e955491-d8ba-483d-b7ab-98370a8acf82", # Use this to ensure uniqueness of the hash/range pairs.
UpdateItemDict # pass the dict that contain the remaining parameters here
))You must specify a RangeKeyValue and a GeoPoint. Optionally, you can pass DeleteItemInput matching DynamoDB DeleteItem request (TableName and Key are filled in for you).
# Preparing dict of the item to delete
DeleteItemDict= {
"ConditionExpression": "attribute_exists(Country)",
"ReturnValues": "ALL_OLD"
# Don't put keys here, they will be generated for you implecitly
}
geoDataManager.delete_Point(
dynamodbgeo.DeleteItemInput(
dynamodbgeo.GeoPoint(36.879163,10.24312), # latitude then latitude longitude
"0df9742f-619b-49e5-b79e-9fb94279d30c", # Use this to ensure uniqueness of the hash/range pairs.
DeleteItemDict # pass the dict that contain the remaining parameters here
))Query by rectangle by specifying a MinPoint and MaxPoint. You can also pass filtring criteria in a dictionary as explained in the example.
NOTE: You cannot add filtring criteria related to the key attributes as they're used in the geo spacial filtring.
# Querying a rectangle
QueryRectangleInput={
"FilterExpression": "Country = :val1",
"ExpressionAttributeValues": {
":val1": {"S": "Italy"},
}
}
print(geoDataManager.queryRectangle(
dynamodbgeo.QueryRectangleRequest(
dynamodbgeo.GeoPoint(36.878184, 10.242358),
dynamodbgeo.GeoPoint(36.879317, 10.243648),QueryRectangleInput)))Query by radius by specifying a CenterPoint and RadiusInMeter. You can also pass filtring criteria in a dictionary as explained in the example.
Same as in query rectangle, you cannot add filtring criteria related to the key attributes as they're used in the geo spacial filtring.
# Querying 95 meter from the center point (36.879131, 10.243057)
QueryRadiusInput={
"FilterExpression": "Country = :val1",
"ExpressionAttributeValues": {
":val1": {"S": "Italy"},
}
}
query_reduis_result=geoDataManager.queryRadius(
dynamodbgeo.QueryRadiusRequest(
dynamodbgeo.GeoPoint(36.879131, 10.243057), # center point
95, QueryRadiusInput, sort = True)) # diameterTODO:
These are public properties of a GeoDataManagerConfiguration instance. After creating the config object you may modify these properties.
The name of the attribute storing the full 64-bit geohash. Its value is auto-generated based on item coordinates.
The name of the attribute storing the first hashKeyLength digits (default 2) of the geo hash, used as the hash (aka partition) part of a hash/range primary key pair. Its value is auto-generated based on item coordinates.
See above.
The name of the attribute storing the range key, used as the range (aka sort) part of a hash/range key primary key pair. Its value must be specified by you (hash-range pairs must be unique).
The name of the attribute which will contain the longitude/latitude pair in a GeoJSON-style point (see also longitudeFirst).
The name of the index to be created against the geohash. Only used for creating new tables.
TODO
Currently, the library does not support composite keys. You may want to add tags such as restaurant, bar, and coffee shop, and search locations of a specific category; however, it is currently not possible. You need to create a table for each tag and store the items separately.
Although low level DynamoDB Query requests return paginated results, this library automatically pages through the entire result set. When querying a large area with many points, a lot of Read Capacity Units may be consumed.
The library retrieves candidate Geo points from the cells that intersect the requested bounds. The library then post-processes the candidate data, filtering out the specific points that are outside the requested bounds. Therefore, the consumed Read Capacity Units will be higher than the final results dataset. Typically 8 queries are exectued per radius or box search.
Because all paginated Query results are loaded into memory and processed, it may consume substantial amounts of memory for large datasets.
The Geohash used in this library is roughly centimeter precision. Therefore, the library is not suitable if your dataset has much higher density.