Weather Board Libraries and Example for Raspberry Pi
Supports SwitchDoc Labs WeatherRack / Argent Data / Sparkfun
Version 1.8
August 22, 2016: Added support for WXLink - Wireless connection to WeatherRack and AM2315
August 4, 2016: Fix for OLED Present under Lightning Conditions
SwitchDocLabs Documentation for the Weather Board under products on:
Support for all 7 I2C devices supported by the Weather Board
New Support for the SwitchDoc Labs Grove OLED Board New Support for the MOD-1016G Grove Lightning Detection Board - www.embeddedadventures.com New Support for SwitchDoc SunAirPlus Solar Power Controller Board
Other installations required for AM2315 support:
sudo apt-get install python-pip sudo apt-get install libi2c-dev sudo pip install tentacle_pi
Other installations required for SD1306 OLED support: sudo apt-get update
sudo apt-get install python-imaging python-smbus
sudo apt-get install build-essential python-dev python-pip sudo pip install RPi.GPIO
Finally, on the Raspberry Pi install the Python Imaging Library and smbus library by executing:
sudo apt-get install python-imaging python-smbus
Now to download and install the SSD1306 python library code and examples, execute the following commands:
sudo apt-get install git git clone https://github.com/adafruit/Adafruit_Python_SSD1306.git cd Adafruit_Python_SSD1306 sudo python setup.py install
Modify this section of code to support your configuration:
config.Lightning_Mode = False
config.SolarPower_Mode = False All other devices are detected automatically.
sudo python WeatherBoard.py
If you attach an AM2315 to the WXLink Transmitter, then the program will assume that is the AM2315 you want for outside temperature and humidity. These values will overwrite the AM2315 connected to the local Raspberry Pi or Weather Board.