/arduino-sketches

Primary LanguageC++

Arduino Sketches

Setting up

Install arduino-cli. Then Updating sketchbook_path is recommended.

$ brew install arduino-cli
$ arduino-cli config init # Make config file at ~/.arduino15
$ arduino-cli board list # Check port, fqbn, and core
$ arduino-cli core install arduino:avr # `arduino:avr` is a sample

$ sudo chmod a+rw /dev/ttyACM0

$ arduino-cli compile --fqbn arduino:avr:uno LEDBlinker
$ arduino-cli upload -p /dev/ttyACM0 --fqbn arduino:avr:uno LEDBlinker

$ screen /dev/ttyACM0 9600 # ctrl+a > k

References