How to retrieve timezone?
benpeart opened this issue · 4 comments
benpeart commented
I have seen in the config web page that the time zone is detected and shown but I can't figure out how to retrieve that in my program so that I can use it to initialize a NTP SyncProvider for the time library I'm currently using (https://github.com/PaulStoffregen/Time).
khoih-prog commented
Hi,
I already add the new requested feature and will publish new release within tomorrow.
Hereafter is the debug terminal
Starting Async_ConfigOnDoubleReset using LittleFS on ESP32_DEV
ESPAsync_WiFiManager v1.8.0
ESP_DoubleResetDetector v1.1.1
ESP Self-Stored: SSID = HueNet1, Pass = password
[WM] * Add SSID = HueNet1 , PW = password
Got ESP Self-Stored Credentials. Timeout 120s for Config Portal
[WM] LoadWiFiCfgFile
[WM] OK
[WM] stationIP = 192.168.2.232 , gatewayIP = 192.168.2.1
[WM] netMask = 255.255.255.0
[WM] dns1IP = 192.168.2.1 , dns2IP = 8.8.8.8
Got stored Credentials. Timeout 120s for Config Portal
Current Timezone is America/New_York <=============== The timezone Name stored in Flash/EEPROM
LittleFS Flag read = 0xD0D04321
No doubleResetDetected
Saving config file...
Saving config file OK
[WM] * Add SSID = HueNet1 , PW = password
[WM] * Add SSID = HueNet2 , PW = password
ConnectMultiWiFi in setup
[WM] ConnectMultiWiFi with :
[WM] * Flash-stored Router_SSID = HueNet1 , Router_Pass = password
[WM] * Add SSID = HueNet1 , PW = password
[WM] * Additional SSID = HueNet1 , PW = password
[WM] * Additional SSID = HueNet2 , PW = password
[WM] Connecting MultiWifi...
[WM] WiFi connected after time: 1
[WM] SSID: HueNet1 ,RSSI= -30
[WM] Channel: 2 ,IP address: 192.168.2.232
After waiting 10.94 secs more in setup(), connection result is connected. Local IP: 192.168.2.232
Stop doubleResetDetecting
Saving config file...
Saving config file OK
HHHHHHHHHH HHH
benpeart commented
Awesome. Thank you. That was fast!
I'm assuming I will need to read the stored value from the config file and am hoping it will store the offset from GMT as that is what I need to convert the NTP time to local time.
khoih-prog commented
Will publish new v1.8.0 soon, waiting for final touch.
The new feature will provide the complex TZ ( for example TZ = EST5EDT,M3.2.0,M11.1.0 ) so that you can use directly in ESP32/ESP8266 code as follows
#if ESP8266
configTime(WM_config.TZ, "pool.ntp.org");
#else
//configTzTime(WM_config.TZ, "pool.ntp.org" );
configTzTime(WM_config.TZ, "time.nist.gov", "0.pool.ntp.org", "1.pool.ntp.org");
#endif
The debug terminal outputs
1. ESP8266
Starting Async_ConfigOnDoubleReset_TZ using LittleFS on ESP8266_NODEMCU
ESPAsync_WiFiManager v1.8.0
ESP_DoubleResetDetector v1.1.1
ESP Self-Stored: SSID = HueNet1, Pass = password
[WM] * Add SSID = HueNet1 , PW = password
Got ESP Self-Stored Credentials. Timeout 120s for Config Portal
[WM] LoadWiFiCfgFile
[WM] OK
[WM] stationIP = 192.168.2.188 , gatewayIP = 192.168.2.1
[WM] netMask = 255.255.255.0
[WM] dns1IP = 192.168.2.1 , dns2IP = 8.8.8.8
Got stored Credentials. Timeout 120s for Config Portal
[WM] Current TZ_Name = America/Toronto , TZ = EST5EDT,M3.2.0,M11.1.0 <======= TZ name and TZ here
LittleFS Flag read = 0xD0D04321
No doubleResetDetected
Saving config file...
Saving config file OK
[WM] * Add SSID = HueNet1 , PW = password
[WM] * Add SSID = HueNet2 , PW = password
ConnectMultiWiFi in setup
[WM] ConnectMultiWiFi with :
[WM] * Flash-stored Router_SSID = HueNet1 , Router_Pass = password
[WM] * Add SSID = HueNet1 , PW = password
[WM] * Additional SSID = HueNet1 , PW = password
[WM] * Additional SSID = HueNet2 , PW = password
[WM] Connecting MultiWifi...
[WM] WiFi connected after time: 1
[WM] SSID: HueNet1 ,RSSI= -42
[WM] Channel: 2 ,IP address: 192.168.2.188
After waiting 3.49 secs more in setup(), connection result is connected. Local IP: 192.168.2.188
Stop doubleResetDetecting
Saving config file...
Saving config file OK
Local Date/Time: Sat May 1 12:34:50 2021
Local Date/Time: Sat May 1 12:35:50 2021
Local Date/Time: Sat May 1 12:36:50 2021
Local Date/Time: Sat May 1 12:37:50 2021
Local Date/Time: Sat May 1 12:38:50 2021
2. ESP32
Starting Async_ConfigOnDoubleReset_TZ using LittleFS on ESP32_DEV
ESPAsync_WiFiManager v1.8.0
ESP_DoubleResetDetector v1.1.1
ESP Self-Stored: SSID = HueNet1, Pass = password
[WM] * Add SSID = HueNet1 , PW = password
Got ESP Self-Stored Credentials. Timeout 120s for Config Portal
[WM] LoadWiFiCfgFile
[WM] OK
[WM] stationIP = 192.168.2.232 , gatewayIP = 192.168.2.1
[WM] netMask = 255.255.255.0
[WM] dns1IP = 192.168.2.1 , dns2IP = 8.8.8.8
Got stored Credentials. Timeout 120s for Config Portal
[WM] Current TZ_Name = America/New_York , TZ = EST5EDT,M3.2.0,M11.1.0 <======= TZ name and TZ here
LittleFS Flag read = 0xD0D04321
No doubleResetDetected
Saving config file...
Saving config file OK
[WM] * Add SSID = HueNet1 , PW = password
[WM] * Add SSID = HueNet2 , PW = password
ConnectMultiWiFi in setup
[WM] ConnectMultiWiFi with :
[WM] * Flash-stored Router_SSID = HueNet1 , Router_Pass = password
[WM] * Add SSID = HueNet1 , PW = password
[WM] * Additional SSID = HueNet1 , PW = password
[WM] * Additional SSID = HueNet2 , PW = password
[WM] Connecting MultiWifi...
[WM] WiFi connected after time: 1
[WM] SSID: HueNet1 ,RSSI= -40
[WM] Channel: 2 ,IP address: 192.168.2.232
After waiting 10.95 secs more in setup(), connection result is connected. Local IP: 192.168.2.232
Stop doubleResetDetecting
Saving config file...
Saving config file OK
Local Date/Time: Sat May 1 11:52:50 2021
Local Date/Time: Sat May 1 11:53:50 2021
Local Date/Time: Sat May 1 11:54:50 2021
Local Date/Time: Sat May 1 11:55:50 2021
Local Date/Time: Sat May 1 11:56:50 2021
khoih-prog commented
The ESPAsync_WiFiManager Releases v1.8.0 has just been published.
Your request for enhancement, leading to new v1.8.0 has also been noted in Contributions and Thanks
Major Releases v1.8.0
- Add auto-Timezone feature with variable
_timezoneName(e.g.America/New_York) and function to retrieve TZ (e.g.EST5EDT,M3.2.0,M11.1.0) to use directly to configure ESP32/ESP8266 timezone. Check How to retrieve timezone? #51 - Store those
_timezoneNameandTZin LittleFS or SPIFFS config file. - Using these new timezone feature is optional.
- Add checksum in config file to validate data read from LittleFS or SPIFFS config file.
- Update examples to show how to use the new TZ feature.