DIY sim racing wheel using a Raspberry Pi Pico and an AS5600 magnetic encoder
- Pi Pico (or Pico W)
- Micro USB cable
- AS5600 magnetic encoder
- 4x2mm diametric magnet
- 2x 6x6x4.3mm momentary push button
- 2x 608ZZ bearings
- 24x M3x8 bolts
- 2-4x M3x4 bolts
- 2x M3x20 bolts
- 2x M3x10 bolts
- 7x M3 nuts
- 1x M3x25 bolt
- 2-4x M2x4 bolts
- ~6x "Rainbow Loom" bands
The firmware is written in Arduino using the Arduino IDE and arduino-pico
The following libraries are used: