Hardware used
> Raspberry Pi with Raspbian OS (Lite/Desktop)
> ds18b20 (Temperature sensor)
> Outdoor case
> pH/Chlorine/Conductivity sensor (Coming soon)
Software used
> Python (latest release)
> Pip (Packagemanager for Python)
> Flask (Server application)
1 - Download Raspbian OS (Lite OR Default) RaspberryPi.org
https://www.raspberrypi.org/downloads/
2 - install Python Python Website
sudo apt install python3 idle3
3 - install Pip (Not required for Raspbian OS Default) Pip Manager
For Python3 -> sudo apt install python3-pip
For Python2 -> sudo apt install python-pip
4 - Download Pool-Analyzer Zip PoolAnalyzer Zip
Download Pool-Analyzer und unzip it
5 - Go into dictionary Webapp and run Flask Framework
Pip install flask
6 - put your temperature sensors in file ds18b20.py Connect Sensors
First look for your sensornames
https://raspberryautomation.com/connect-multiple-ds18b20-temperature-sensors-to-a-raspberry-pi/
Put your path for each sensornames in one variable
sensor = '/sys/bus/w1/devices/28-02069177028a/w1_slave' - example
sensor2 = 'your path to the second sensor2'
sensor3 = 'your path to the third sensor3'
1 - Then run this comand in your commandline
Go into Webapp and run -> python app.py
Christopher Himann - Initial work - Further development -
This project is licensed under the MIT License - see the LICENSE.md file for details