/jigasi

Jigasi: a server-side application acting as a gateway to Jitsi Meet conferences. Currently allows regular SIP clients to join meetings and provides transcription capabilities.

Primary LanguageJavaApache License 2.0Apache-2.0

Jigasi

Jitsi Gateway to SIP : a server-side application that links allows regular SIP clients to join Jitsi Meet conferences hosted by Jitsi Videobridge.

Install and run

It is possible to install Jigasi along with Jitsi Meet using our quick install instructions or do this from sources using the instructions below.

  1. Checkout latest source:
git clone https://github.com/jitsi/jigasi.git
  1. Build:
cd jigasi
mvn install -Dassembly.skipAssembly=false
  1. Extract - choose either jigasi-linux-x64-{version}.zip, jigasi-linux-x86-{version}.zip or jigasi-macosx-{version}.zip based on the system.
cd target/
unzip jigasi-{os-version}-{version}.zip
  1. Configure external component in your XMPP server. If your server is Prosody: edit /etc/prosody/prosody.cfg.lua and append following lines to your config (assuming that subdomain is 'callcontrol' and domain 'meet.jit.si'):
Component "callcontrol.meet.jit.si"
    component_secret = "topsecret"
  1. Setup SIP account

Go to jigasi/jigasi-home and edit sip-communicator.properties file. Replace <<JIGASI_SIPUSER>> tag with SIP username for example: "user1232@sipserver.net". Then put Base64 encoded password in place of <<JIGASI_SIPPWD>>.

  1. Start Jigasi
cd jigasi/target/jigasi-{os-version}-{version}/
./jigasi.sh --domain=meet.jit.si --subdomain=callcontrol --secret=topsecret

After Jigasi is started it will register as XMPP component under the 'callcontrol' subdomain. In Jitsi Meet application -> config.js -> hosts.call_control must be set to 'callcontrol.meet.jit.si'. This will enable SIP calls in Jitsi Meet.

Supported arguments:

  • --domain: specifies the XMPP domain to use.
  • --host: the IP address or the name of the XMPP host to connect to (localhost by default).
  • --port: the port of the XMPP host to connect on (5347 by default).
  • --subdomain: subdomain name for SIP gateway component.
  • --secret: the secret key for the sub-domain of the Jabber component implemented by this application with which it is to authenticate to the XMPP server to connect to.
  • --min-port: the minimum port number that we'd like our RTP managers to bind upon.
  • --max-port: the maximum port number that we'd like our RTP managers to bind upon.

How it works

Jigasi registers as a SIP client and can be called or be used by Jitsi Meet to make outgoing calls. Jigasi is NOT a SIP server. It is just a connector that allows SIP servers and B2BUAs to connect to Jitsi Meet. It handles the XMPP signalling, ICE, DTLS/SRTP termination and multiple-SSRC handling for them.

Outgoing calls

To call someone from Jitsi Meet application, Jigasi must be configured and started like described in the 'Install and run' section. This will cause the telephone icon to appear in the toolbar which will popup a call dialog on click.

Incoming calls

Jigasi will register on your SIP server with some identity and it will accept calls. When Jigasi is called, it expects to find a 'Jitsi-Conference-Room' header in the invite with the name of the Jitsi Meet conference the call is to be patched through to. If no header is present it will join the room specified under 'org.jitsi.jigasi.DEFAULT_JVB_ROOM_NAME' config property. In order to change it, edit 'jigasi-home/sipcommunciator.properties' file.

Example:

Received SIP INVITE with room header 'Jitsi-Conference-Room': 'room1234' will cause Jigasi to join the conference 'https://meet.jit.si/room1234' (assuming that our domain is 'meet.jit.si').

Configuring SIP and Transcription

It is possible to either enable or disable the functionality of SIP and transcription. By default, the properties org.jitsi.jigasi.ENABLE_TRANSCRIPTION=false and org.jitsi.jigasi.ENABLE_SIP=true in jigasi-home/sip-communicator.properties enable SIP and disable transcription. To change this, simple set the desired property to true or false.

Using Jigasi to transcribe a Jitsi Meet conference

It is also possible to use Jigasi as a provider of nearly real-time transcription while a conference is ongoing as well as serving a complete transcription after the conference is over. This can be done by using the SIP dial button and using the the URI jitsi_meet_transcribe. Currently Jigasi can send speech-to-text results to the chat of a Jitsi Meet room as either plain text or JSON. If it's send in JSON, Jitsi Meet will provide subtitles in the left corner of the video, while plain text will just be posted in the chat. Jigasi will also provide a link to where the final, complete transcript will be served when it enters the room.

For jigasi to act as a transcriber, it sends the audio of all participants in the room to an external speech-to-text service. Currently only the Google Cloud speech-to-text API is supported. It is required to install the Google Cloud SDK on the machine running Jigasi. To install on a regular debian/ubuntu environment:

export CLOUD_SDK_REPO="cloud-sdk-$(lsb_release -c -s)"
echo "deb http://packages.cloud.google.com/apt $CLOUD_SDK_REPO main" | sudo tee -a /etc/apt/sources.list.d/google-cloud-sdk.list
curl https://packages.cloud.google.com/apt/doc/apt-key.gpg | sudo apt-key add -
sudo apt-get update && sudo apt-get install google-cloud-sdk google-cloud-sdk-app-engine-java
gcloud init
gcloud auth application-default login

There are several configuration options regarding transcription. These should be placed in ~/jigasi/jigasi-home/sip-communicator.properties. The default value will be used when the property is not set in the property file. A valid XMPP account must also be set to make Jigasi be able to join a conference room.

Property name Default value Description
org.jitsi.jigasi.transcription.DIRECTORY /var/lib/jigasi/transcripts The folder which will be used to store and serve the final transcripts.
org.jitsi.jigasi.transcription.BASE_URL http://localhost/ The base URL which will be used to serve the final transcripts. The URL used to serve a transcript will be this base appended by the filename of the transcript.
org.jitsi.jigasi.transcription.jetty.port -1 The port which will be used to serve the final transcripts. Its default value is -1, which means the Jetty instance serving the transcript files is turned off.
org.jitsi.jigasi.transcription.ADVERTISE_URL false Whether or not to advertise the URL which will serve the final transcript when Jigasi joins the room.
org.jitsi.jigasi.transcription.SAVE_JSON false Whether or not to save the final transcript in JSON. Note that this format is not very human readable.
org.jitsi.jigasi.transcription.SAVE_TXT true Whether or not to save the final transcript in plain text.
org.jitsi.jigasi.transcription.SEND_JSON true Whether or not to send results, when they come in, to the chatroom in JSON. Note that this will result in subtitles being shown.
org.jitsi.jigasi.transcription.SEND_TXT false Whether or not to send results, when they come in, to the chatroom in plain text. Note that this will result in the chat being somewhat spammed.

Call control MUCs (brewery)

For outgoing calls jigasi by default configures using callcontrol XMPP component (when installing using Debian package). Jicofo discovers jigasi components and uses them. Instead of component and for multiple jigasi instances and better load balancing jigasi can disable component (by passing startup parameter --nocomponent=true) and can use XMPP MUCs called a brewery to join and be discovered. To configure using MUCs you need to add an XMPP account that will be used to connect to the XMPP server and add the property org.jitsi.jigasi.BREWERY_ENABLED=true. Here are example XMPP account properties:

net.java.sip.communicator.impl.protocol.jabber.acc-xmpp-1=acc-xmpp-1
net.java.sip.communicator.impl.protocol.jabber.acc-xmpp-1.ACCOUNT_UID=Jabber:jigasi@auth.meet.jit.si@meet.jit.si
net.java.sip.communicator.impl.protocol.jabber.acc-xmpp-1.USER_ID=jigasi@auth.meet.jit.si
net.java.sip.communicator.impl.protocol.jabber.acc-xmpp-1.IS_SERVER_OVERRIDDEN=true
net.java.sip.communicator.impl.protocol.jabber.acc-xmpp-1.SERVER_ADDRESS=<xmpp_server_ip_address>
net.java.sip.communicator.impl.protocol.jabber.acc-xmpp-1.SERVER_PORT=5222
net.java.sip.communicator.impl.protocol.jabber.acc-xmpp-1.BOSH_URL=https://xmpp_server_ip_address/http-bind
net.java.sip.communicator.impl.protocol.jabber.acc-xmpp-1.ALLOW_NON_SECURE=true
#base64
net.java.sip.communicator.impl.protocol.jabber.acc-xmpp-1.PASSWORD=<xmpp_account_password>
net.java.sip.communicator.impl.protocol.jabber.acc-xmpp-1.RESOURCE_PRIORITY=30
net.java.sip.communicator.impl.protocol.jabber.acc-xmpp-1.KEEP_ALIVE_METHOD=XEP-0199
net.java.sip.communicator.impl.protocol.jabber.acc-xmpp-1.KEEP_ALIVE_INTERVAL=30
net.java.sip.communicator.impl.protocol.jabber.acc-xmpp-1.CALLING_DISABLED=true
net.java.sip.communicator.impl.protocol.jabber.acc-xmpp-1.JINGLE_NODES_ENABLED=false
net.java.sip.communicator.impl.protocol.jabber.acc-xmpp-1.IS_CARBON_DISABLED=true
net.java.sip.communicator.impl.protocol.jabber.acc-xmpp-1.IS_USE_ICE=true
net.java.sip.communicator.impl.protocol.jabber.acc-xmpp-1.IS_ACCOUNT_DISABLED=false
net.java.sip.communicator.impl.protocol.jabber.acc-xmpp-1.IS_PREFERRED_PROTOCOL=false
net.java.sip.communicator.impl.protocol.jabber.acc-xmpp-1.AUTO_DISCOVER_JINGLE_NODES=false
net.java.sip.communicator.impl.protocol.jabber.acc-xmpp-1.PROTOCOL=Jabber
net.java.sip.communicator.impl.protocol.jabber.acc-xmpp-1.IS_USE_UPNP=false
net.java.sip.communicator.impl.protocol.jabber.acc-xmpp-1.IM_DISABLED=true
net.java.sip.communicator.impl.protocol.jabber.acc-xmpp-1.SERVER_STORED_INFO_DISABLED=true
net.java.sip.communicator.impl.protocol.jabber.acc-xmpp-1.IS_FILE_TRANSFER_DISABLED=true

net.java.sip.communicator.impl.protocol.jabber.acc-xmpp-1.BOSH_URL_PATTERN=https://{host}{subdomain}/http-bind?room={roomName}
net.java.sip.communicator.impl.protocol.jabber.acc-xmpp-1.DOMAIN_BASE=meet.jit.si
net.java.sip.communicator.impl.protocol.jabber.acc-xmpp-1.BREWERY=JigasiBreweryRoom@internal.muc.meet.jit.si

The property BOSH_URL_PATTERN is the bosh URL that will be used from jigasi when a call on this account is received.

The value of BREWERY is the name of the brewery room where jigasi will connect. That room needs to be configured in jicofo with the following property: org.jitsi.jicofo.jigasi.BREWERY=JigasiBreweryRoom@internal.muc.meet.jit.si Where prosody needs to have a registered muc component: internal.muc.meet.jit.si.

You can configure and per XMPP account callstats account, a jigasi instance can serve several deployments/domains:

net.java.sip.communicator.impl.protocol.jabber.acc-xmpp-1.CallStats.appId=...
net.java.sip.communicator.impl.protocol.jabber.acc-xmpp-1.CallStats.keyId=...
net.java.sip.communicator.impl.protocol.jabber.acc-xmpp-1.CallStats.keyPath=/etc/jitsi/jigasi/ecpriv.jwk
net.java.sip.communicator.impl.protocol.jabber.acc-xmpp-1.CallStats.conferenceIDPrefix=meet.jit.si
net.java.sip.communicator.impl.protocol.jabber.acc-xmpp-1.CallStats.jigasiId=<id-of-this-instance-visible-in-callstats>
net.java.sip.communicator.impl.protocol.jabber.acc-xmpp-1.CallStats.STATISTICS_INTERVAL=60000

The configuration for the XMPP control MUCs that jigasi uses can be modified at run time using REST calls to /configure/.

Adding an XMPP control MUC

A new XMPP control MUC can be added by posting a JSON which contains its configuration to /configure/call-control-muc/add:

{
  "id": "acc-xmpp-1",
  "ACCOUNT_UID":"Jabber:jigasi@auth.meet.jit.si@meet.jit.si",
  "USER_ID":"jigasi@auth.meet.jit.si",
  "IS_SERVER_OVERRIDDEN":"true",
  .....
}

If a configuration with the specified ID already exists, the request will succeed (return 200), but the configuration will NOT be updated. If you need to update an existing configuration, you need to remove it first and then re-add it.

Removing an XMPP control MUC.

An XMPP control MUC can be removed by posting a JSON which contains its ID to /configure/call-control-muc/remove:

{
  "id": "acc-xmpp-1"
}

The request will be successful (return 200) as long as the format of the JSON is as expected, and the connection was found and removed.