/hutch

A system for processing messages from RabbitMQ.

Primary LanguageRubyMIT LicenseMIT

Gem Version Code Climate

Hutch is a Ruby library for enabling asynchronous inter-service communication in a service-oriented architecture, using RabbitMQ.

To install with RubyGems:

gem install hutch

Table of Contents

Requirements

  • Hutch requires Ruby 2.4+ or JRuby 9K.
  • Hutch requires RabbitMQ 3.3 or later.

Overview

Hutch is a conventions-based framework for writing services that communicate over RabbitMQ. Hutch is opinionated: it uses topic exchanges for message distribution and makes some assumptions about how consumers and publishers should work.

With Hutch, consumers are stored in separate files and include the Hutch::Consumer module. They are then loaded by a command line runner which connects to RabbitMQ, sets up queues and bindings, and so on. Publishers connect to RabbitMQ via Hutch.connect and publish using Hutch.publish.

Hutch uses Bunny or March Hare (on JRuby) under the hood.

Project Maturity

Hutch is a mature project that was originally extracted from production systems at GoCardless in 2013 and is now maintained by its contributors and users.

Consumers

Consumers receive messages from a RabbitMQ queue. That queue may be bound to one or more topics (represented by routing keys).

To create a consumer, include the Hutch::Consumer module in a class that defines a #process method. #process should take a single argument, which will be a Message object. The Message object encapsulates the message data, along with any associated metadata. To access properties of the message, use Hash-style indexing syntax:

message[:id]  # => "02ABCXYZ"

To subscribe to a topic, pass a routing key to consume in the class definition. To bind to multiple routing keys, simply pass extra routing keys in as additional arguments. Refer to the RabbitMQ docs on topic exchanges for more information about how to use routing keys. Here's an example consumer:

class FailedPaymentConsumer
  include Hutch::Consumer
  consume 'gc.ps.payment.failed'

  def process(message)
    mark_payment_as_failed(message[:id])
  end
end

By default, the queue name will be named using the consumer class. You can set the queue name explicitly by using the queue_name method:

class FailedPaymentConsumer
  include Hutch::Consumer
  consume 'gc.ps.payment.failed'
  queue_name 'failed_payments'

  def process(message)
    mark_payment_as_failed(message[:id])
  end
end

It is possible to set some custom options to consumer's queue explicitly. This example sets the consumer's queue as a quorum queue and to operate in the lazy mode. The initial_group_size argument is optional.

class FailedPaymentConsumer
  include Hutch::Consumer
  consume 'gc.ps.payment.failed'
  queue_name 'failed_payments'
  lazy_queue
  quorum_queue initial_group_size: 3

  def process(message)
    mark_payment_as_failed(message[:id])
  end
end

You can also set custom arguments per consumer. This example declares a consumer with a maximum length of 10 messages:

class FailedPaymentConsumer
  include Hutch::Consumer
  consume 'gc.ps.payment.failed'
  arguments 'x-max-length' => 10
end

This sets the x-max-length header. For more details, see the RabbitMQ documentation on Queue Length Limit. To find out more about custom queue arguments, consult the RabbitMQ documentation on AMQP Protocol Extensions.

Consumers can write to Hutch's log by calling the logger method. The logger method returns a Logger object.

class FailedPaymentConsumer
  include Hutch::Consumer
  consume 'gc.ps.payment.failed'

  def process(message)
    logger.info "Marking payment #{message[:id]} as failed"
    mark_payment_as_failed(message[:id])
  end
end

If you are using Hutch with Rails and want to make Hutch log to the Rails logger rather than stdout, add this to config/initializers/hutch.rb

Hutch::Logging.logger = Rails.logger

A logger can be set for the client by adding this config before calling Hutch.connect

client_logger = Logger.new("/path/to/bunny.log")
Hutch::Config.set(:client_logger, client_logger)

See this RabbitMQ tutorial on topic exchanges to learn more.

Message Processing Tracers

Tracers allow you to track message processing.

This will enable NewRelic custom instrumentation:

Hutch::Config.set(:tracer, Hutch::Tracers::NewRelic)

And this will enable Datadog custom instrumentation:

Hutch::Config.set(:tracer, Hutch::Tracers::Datadog)

Batteries included!

Running Hutch

After installing the Hutch gem, you should be able to start it by simply running hutch on the command line. hutch takes a number of options:

$ hutch -h
usage: hutch [options]
        --mq-host HOST               Set the RabbitMQ host
        --mq-port PORT               Set the RabbitMQ port
    -t, --[no-]mq-tls                Use TLS for the AMQP connection
        --mq-tls-cert FILE           Certificate  for TLS client verification
        --mq-tls-key FILE            Private key for TLS client verification
        --mq-exchange EXCHANGE       Set the RabbitMQ exchange
        --mq-vhost VHOST             Set the RabbitMQ vhost
        --mq-username USERNAME       Set the RabbitMQ username
        --mq-password PASSWORD       Set the RabbitMQ password
        --mq-api-host HOST           Set the RabbitMQ API host
        --mq-api-port PORT           Set the RabbitMQ API port
    -s, --[no-]mq-api-ssl            Use SSL for the RabbitMQ API
        --config FILE                Load Hutch configuration from a file
        --require PATH               Require a Rails app or path
        --[no-]autoload-rails        Require the current rails app directory
    -q, --quiet                      Quiet logging
    -v, --verbose                    Verbose logging
        --version                    Print the version and exit
    -h, --help                       Show this message and exit

The first three are for configuring which RabbitMQ instance to connect to. --require is covered in the next section. Configurations can also be specified in a YAML file for convenience by passing the file location to the --config option. The file should look like:

mq_username: peter
mq_password: rabbit
mq_host: broker.yourhost.com

Passing a setting as a command-line option will overwrite what's specified in the config file, allowing for easy customization.

Loading Consumers

Using Hutch with a Rails app is simple. Either start Hutch in the working directory of a Rails app, or pass the path to a Rails app in with the --require option. Consumers defined in Rails apps should be placed with in the app/consumers/ directory, to allow them to be auto-loaded when Rails boots.

If you're using the new Zeitwerk autoloader (enabled by default in Rails 6) and the consumers are not loaded in development environment you will need to trigger the autoloading in an initializer with

::Zeitwerk::Loader.eager_load_all

or with something more specific like

autoloader = Rails.autoloaders.main

Dir.glob(File.join('app/consumers', '*_consumer.rb')).each do |consumer|
  autoloader.preload(consumer)
end

Consumer Groups

It is possible to load only a subset of consumers. This is done by defining a consumer group under the consumer_groups configuration key:

consumer_groups:
  payments:
    - DepositConsumer
    - CashoutConsumer
  notification:
    - EmailNotificationConsumer

To only load a group of consumers, use the --only-group option:

hutch --only-group=payments --config=/path/to/hutch.yaml

Loading Consumers Manually (One-by-One)

To require files that define consumers manually, simply pass each file as an option to --require. Hutch will automatically detect whether you've provided a Rails app or a standard file, and take the appropriate behaviour:

# loads a rails app
hutch --require path/to/rails-app
# loads a ruby file
hutch --require path/to/file.rb

Stopping Hutch

Hutch supports graceful stops. That means that if done correctly, Hutch will wait for your consumer to finish processing before exiting.

To gracefully stop your workers, you may send the following signals to your Hutch processes: INT, TERM, or QUIT.

kill -SIGINT 123 # or kill -2 123
kill -SIGTERM 456 # or kill -15 456
kill -SIGQUIT 789 # or kill -3 789

Producers

Hutch includes a publish method for sending messages to Hutch consumers. When possible, this should be used, rather than directly interfacing with RabbitMQ libraries.

Hutch.connect
Hutch.publish('routing.key', subject: 'payment', action: 'received')

Producer Configuration

Producers are not run with the 'hutch' command. You can specify configuration options as follows:

Hutch::Config.set(:mq_exchange, 'name')

Publisher Confirms

For maximum message reliability when producing messages, you can force Hutch to use Publisher Confirms and wait for a confirmation after every message published. This is the safest possible option for publishers but also results in a significant throughput drop.

Hutch::Config.set(:force_publisher_confirms, true)

Writing Well-Behaved Publishers

You may need to send messages to Hutch from languages other than Ruby. This prevents the use of Hutch.publish, requiring custom publication code to be written. There are a few things to keep in mind when writing producers that send messages to Hutch.

  • Make sure that the producer exchange name matches the exchange name that Hutch is using.
  • Hutch works with topic exchanges, check the producer is also using topic exchanges.
  • Use message routing keys that match those used in your Hutch consumers.
  • Be sure your exchanges are marked as durable. In the Ruby AMQP gem, this is done by passing durable: true to the exchange creation method.
  • Publish messages as persistent.
  • Using publisher confirms is highly recommended.

Here's an example of a well-behaved publisher, minus publisher confirms:

AMQP.connect(host: config[:host]) do |connection|
  channel  = AMQP::Channel.new(connection)
  exchange = channel.topic(config[:exchange], durable: true)

  message = JSON.dump({ subject: 'Test', id: 'abc' })
  exchange.publish(message, routing_key: 'test', persistent: true)
end

If using publisher confirms with amqp gem, see this issue and this gist for more info.

Configuration

Config File

It is recommended to use a separate config file, unless you use URIs for connection (see below).

Known configuration parameters are:

  • mq_host: RabbitMQ hostname (default: localhost)
  • mq_port: RabbitMQ port (default: 5672)
  • mq_vhost: vhost to use (default: /)
  • mq_username: username to use (default: guest, only can connect from localhost as of RabbitMQ 3.3.0)
  • mq_password: password to use (default: guest)
  • mq_tls: should TLS be used? (default: false)
  • mq_tls_cert: path to client TLS certificate (public key)
  • mq_tls_key: path to client TLS private key
  • mq_tls_ca_certificates: array of paths to CA keys (if not specified to Hutch, will default to Bunny defaults which are system-dependent)
  • mq_verify_peer: should SSL certificate be verified? (default: true)
  • require_paths: array of paths to require
  • autoload_rails: should Hutch command line runner try to automatically load Rails environment files?
  • daemonise: should Hutch runner process daemonise?
  • pidfile: path to PID file the runner should use
  • channel_prefetch: basic.qos prefetch value to use (default: 0, no limit). See Bunny and RabbitMQ documentation.
  • publisher_confirms: enables publisher confirms. Leaves it up to the app how they are tracked (e.g. using Hutch::Broker#confirm_select callback or Hutch::Broker#wait_for_confirms)
  • force_publisher_confirms: enables publisher confirms, forces Hutch::Broker#wait_for_confirms for every publish. This is the safest option which also offers the lowest throughput.
  • log_level: log level used by the standard Ruby logger (default: Logger::INFO)
  • error_handlers: a list of error handler objects, see classes in Hutch::ErrorHandlers. All configured handlers will be invoked unconditionally in the order listed.
  • error_acknowledgements: a chain of responsibility of objects that acknowledge/reject/requeue messages when an exception happens, see classes in Hutch::Acknowledgements.
  • mq_exchange: exchange to use for publishing (default: hutch)
  • heartbeat: RabbitMQ heartbeat timeout (default: 30)
  • connection_timeout: Bunny's socket open timeout (default: 11)
  • read_timeout: Bunny's socket read timeout (default: 11)
  • write_timeout: Bunny's socket write timeout (default: 11)
  • automatically_recover: Bunny's enable/disable network recovery (default: true)
  • network_recovery_interval: Bunny's reconnect interval (default: 1)
  • tracer: tracer to use to track message processing
  • namespace: A namespace string to help group your queues (default: nil)

Environment variables

The file configuration options mentioned above can also be passed in via environment variables, using the HUTCH_ prefix, eg.

  • connection_timeoutHUTCH_CONNECTION_TIMEOUT.

Configuration precedence

In order from lowest to highest precedence:

  1. Default values
  2. HUTCH_* environment variables
  3. Configuration file
  4. Explicit settings through Hutch::Config.set

Generated list of configuration options

Generate with

  1. yard doc lib/hutch/config.rb
  2. Copy the Configuration section from doc/Hutch/Config.html here, with the anchor tags stripped.
Setting name Default value Type ENV variable Description
mq_host 127.0.0.1 String HUTCH_MQ_HOST

RabbitMQ hostname

mq_exchange hutch String HUTCH_MQ_EXCHANGE

RabbitMQ Exchange to use for publishing

mq_exchange_type topic String HUTCH_MQ_EXCHANGE_TYPE

RabbitMQ Exchange type to use for publishing

mq_vhost / String HUTCH_MQ_VHOST

RabbitMQ vhost to use

mq_username guest String HUTCH_MQ_USERNAME

RabbitMQ username to use.

mq_password guest String HUTCH_MQ_PASSWORD

RabbitMQ password

uri nil String HUTCH_URI

RabbitMQ URI (takes precedence over MQ username, password, host, port and vhost settings)

mq_api_host 127.0.0.1 String HUTCH_MQ_API_HOST

RabbitMQ HTTP API hostname

mq_port 5672 Number HUTCH_MQ_PORT

RabbitMQ port

mq_api_port 15672 Number HUTCH_MQ_API_PORT

RabbitMQ HTTP API port

heartbeat 30 Number HUTCH_HEARTBEAT

RabbitMQ heartbeat timeout

channel_prefetch 0 Number HUTCH_CHANNEL_PREFETCH

The basic.qos prefetch value to use.

connection_timeout 11 Number HUTCH_CONNECTION_TIMEOUT

Bunny's socket open timeout

read_timeout 11 Number HUTCH_READ_TIMEOUT

Bunny's socket read timeout

write_timeout 11 Number HUTCH_WRITE_TIMEOUT

Bunny's socket write timeout

automatically_recover true Boolean HUTCH_AUTOMATICALLY_RECOVER

Bunny's enable/disable network recovery

network_recovery_interval 1 Number HUTCH_NETWORK_RECOVERY_INTERVAL

Bunny's reconnect interval

graceful_exit_timeout 11 Number HUTCH_GRACEFUL_EXIT_TIMEOUT

FIXME: DOCUMENT THIS

consumer_pool_size 1 Number HUTCH_CONSUMER_POOL_SIZE

Bunny consumer work pool size

mq_tls false Boolean HUTCH_MQ_TLS

Should TLS be used?

mq_verify_peer true Boolean HUTCH_MQ_VERIFY_PEER

Should SSL certificate be verified?

mq_api_ssl false Boolean HUTCH_MQ_API_SSL

Should SSL be used for the RabbitMQ API?

autoload_rails true Boolean HUTCH_AUTOLOAD_RAILS

Should the current Rails app directory be required?

daemonise false Boolean HUTCH_DAEMONISE

Should the Hutch runner process daemonise?

publisher_confirms false Boolean HUTCH_PUBLISHER_CONFIRMS

Should RabbitMQ publisher confirms be enabled?

force_publisher_confirms false Boolean HUTCH_FORCE_PUBLISHER_CONFIRMS

Enables publisher confirms, forces Hutch::Broker#wait_for_confirms for

enable_http_api_use true Boolean HUTCH_ENABLE_HTTP_API_USE

Should the RabbitMQ HTTP API be used?

consumer_pool_abort_on_exception false Boolean HUTCH_CONSUMER_POOL_ABORT_ON_EXCEPTION

Should Bunny's consumer work pool threads abort on exception.

consumer_tag_prefix hutch String HUTCH_CONSUMER_TAG_PREFIX

Prefix displayed on the consumers tags.

namespace nil String HUTCH_NAMESPACE

A namespace to help group your queues

group '' String HUTCH_GROUP