Build your own GPS GNS530 for simulation cockpit.
Format for 6.25" stack
Electronics are design with EasyEDA.
3D parts are design with SolidWorks.
Parts printed with ANET A8 and CURA 15.04.6
PCB are sold by JLCPCB, you can use directly Gerber files --> JLCPCB
Only electronics, you can choose the microcontroller of your choice, the base design have addtionnal card for Mega2560R3.
For mine i use Mega2560R3 and Mobiflight on MSFS2020--> MOBIFLIGHT
For others controllers you need to design the support for the card, or add wires to link them.
The Screen use for this project --> Aliexpress
Controller PIN | Header PIN | Description |
---|---|---|
5V | 1 | 5V |
22 | 2 | LEFT Encoder double |
23 | 3 | LEFT Encoder double |
24 | 4 | LEFTEncoder double |
25 | 5 | LEFT Encoder double |
26 | 6 | LEFT Encoder double push button |
27 | 7 | RIGHT Encoder double |
28 | 8 | RIGHT Encoder double |
29 | 9 | RIGHT Encoder double |
30 | 10 | RIGHT Encoder double |
31 | 11 | RIGHT Encoder double push button |
32 | 12 | Button CDI |
33 | 13 | Button OBS |
34 | 14 | Button MSG |
35 | 15 | Button FPL |
36 | 16 | Button VNAV |
37 | 17 | Button PROC |
38 | 18 | Button ENT |
39 | 19 | Button CLR |
40 | 20 | Button MENU |
41 | 21 | Button Direct-to |
42 | 22 | Button Zoom- |
43 | 23 | Button Zoom+ |
44 | 24 | Button COM swap |
45 | 25 | Button VLOC swap |
46 | 26 | Encoder volume COM |
47 | 27 | Encoder volume COM |
48 | 28 | Encoder volume VLOC |
49 | 29 | Encoder volume VLOC |
GND | 30 | GND |
50 | 31 | Encoder volume COM - push button |
51 | 32 | Encoder volume VLOC - push button |
- PLA BLACK and PLA WHITE
With CURA you need plugin PauseAtZ, i modified the plugin to add 2 pauses (printing buttons by example) download and install it--> Here
Build transponder KT76C for Cessna172 -> Transponder
Build AutoPilot KAP140 for Cessna172 -> AutoPilot