/bitwig-edirol-pcr

DEPRECATED: Please use github.com/klingtnet/bitwig-extensions

Primary LanguageJavaMIT LicenseMIT

DEPRECATED

Please use github.com/klingtnet/bitwig-extensions instead.

Bitwig Controller Script for the Edirol PCR USB Midi controller family

Build Status

The controller script was only tested with the PCR-300 but should work with the larger models (PCR-{500,800}), as well. The controller script assumes that you're using controller map 0. Check the tips section or refer to the user's manual on how to change the control map.

Notes

  • the 9th knob is not mapped. If someone has a good idea on where to map it then please let me know!

Tips

  • Switch to controller map x:
    • Press Control Map
    • Turn value knob until x is shown in the display
    • Done
  • Reset the keyboard to factory defaults (manual page 81):
    • Press Edit
    • Select SYS using the value knob and press Enter
    • Select SY16 using the value knob and press Enter
    • if RST is blinking in the display, press Enter
    • Now YES should be blinking
    • Confirm with Enter
  • Show (firmware) program version of your PCR keyboard:
    • Power off the keyboard
    • Press and hold Dynamic Mapping and L1
    • Power on
    • Version will be displayed
    • This script should work with older version but was only tested with the latest firmware version 1.05

Links