/sandbox

Local TON emulator

Primary LanguageTypeScriptMIT LicenseMIT

Sandbox

This package allows you to emulate arbitrary TON smart contracts, send messages to them and run get methods on them as if they were deployed on a real network.

The key difference of this package from ton-contract-executor is the fact that the latter only emulates the compute phase of the contract - it does not know about any other phases and thus does not know anything about fees and balances (in a sense that it does not know whether a contract's balance will be enough to process all the out messages that it produces). On the other hand, this package emulates all the phases of a contract, and as a result, the emulation is much closer to what would happen in a real network.

Content

Installation

Requires node 16 or higher.

yarn add @ton/sandbox @ton/ton @ton/core @ton/crypto

or

npm i @ton/sandbox @ton/ton @ton/core @ton/crypto

Usage

To use this package, you need to create an instance of the Blockchain class using the static method Blockchain.create as follows:

import { Blockchain } from "@ton/sandbox";

const blockchain = await Blockchain.create()

After that, you can use the low level methods on Blockchain (such as sendMessage) to emulate any messages that you want, but the recommended way to use it is to write wrappers for your contract using the Contract interface from @ton/core. Then you can use blockchain.openContract on instances of such contracts, and they will be wrapped in a Proxy that will supply a ContractProvider as a first argument to all its methods starting with either get or send. Also all send methods will get Promisified and will return results of running the blockchain message queue along with the original method's result in the result field.

A good example of this is the treasury contract that is basically a built-in highload wallet meant to help you write tests for your systems of smart contracts. When blockchain.treasury is called, an instance of TreasuryContract is created and blockchain.openContract is called to "open" it. After that, when you call treasury.send, Blockchain automatically supplies the first provider argument.

For your own contracts, you can draw inspiration from the contracts in the examples - all of them use the provider.internal method to send internal messages using the treasuries passed in from the unit test file. Here is an excerpt of that from NftItem.ts:

import { Address, beginCell, Cell, Contract, ContractProvider, Sender, toNano, Builder } from "@ton/core";

class NftItem implements Contract {
    async sendTransfer(provider: ContractProvider, via: Sender, params: {
        value?: bigint
        to: Address
        responseTo?: Address
        forwardAmount?: bigint
        forwardBody?: Cell | Builder
    }) {
        await provider.internal(via, {
            value: params.value ?? toNano('0.05'),
            body: beginCell()
                .storeUint(0x5fcc3d14, 32) // op
                .storeUint(0, 64) // query id
                .storeAddress(params.to)
                .storeAddress(params.responseTo)
                .storeBit(false) // custom payload
                .storeCoins(params.forwardAmount ?? 0n)
                .storeMaybeRef(params.forwardBody)
                .endCell()
        })
    }
}

When you call nftItem.sendTransfer(treasury.getSender(), { to: recipient }) (with nftItem being an "opened" instance of NftItem), an external message to the wallet represented by treasury will be pushed onto the message queue, then processed, generating an internal message to the NFT contract.

Here is another excerpt that shows the way to interact with get methods from wrappers:

import { Contract, ContractProvider } from "@ton/core";

export type NftItemData = {
    inited: boolean
    index: number
    collection: Address | null
    owner: Address | null
    content: Cell | null
}

class NftItem implements Contract {
    async getData(provider: ContractProvider): Promise<NftItemData> {
        const { stack } = await provider.get('get_nft_data', [])
        return {
            inited: stack.readBoolean(),
            index: stack.readNumber(),
            collection: stack.readAddressOpt(),
            owner: stack.readAddressOpt(),
            content: stack.readCellOpt(),
        }
    }
}

When you call nftItem.getData() (note that just like in the sendTransfer method, you don't need to supply the provider argument - it's done for you on "opened" instances), the provider will query the smart contract contained in blockchain and parse the data according to the code. Note that unlike the send methods, get methods on "opened" instances will return the original result as-is to the caller.

Notes:

  • All of the methods of contracts that you want to "open" that start with get or send NEED to accept provider: ContractProvider as a first argument (even if not used) due to how the wrapper works.
  • You can open any contract at any address, even if it is not yet deployed or was deployed by a "parent" opened contract. The only requirement is that the address field (required by the Contract interface) is the address of the contract that you want to open, and that init is present if you want to deploy using methods on the opened instance (in other cases, init is not necessary).
  • Ideally, at most one call to either provider.internal or provider.external should be made within a send method. Otherwise, you may get hard to interpret (but generally speaking correct) results.
  • No calls to provider.external or provider.internal should be made within get methods. Otherwise, you will get weird and wrong results in the following send methods of any contract.

Writing tests

Basic test template

You can install additional @ton/test-utils package by running yarn add @ton/test-utils -D or npm i --save-dev @ton/test-utils (with .toHaveTransaction for jest or .transaction or .to.have.transaction for chai matcher) to add additional helpers for ease of testing. Don't forget to import them in your unit test files though!

Writing tests in Sandbox works through defining arbitary actions with the contract and comparing their results with the expected result, for example:

it('should execute with success', async () => {                              // description of the test case
    const res = await main.sendMessage(sender.getSender(), toNano('0.05'));  // performing an action with contract main and saving result in res

    expect(res.transactions).toHaveTransaction({                             // configure the expected result with expect() function
        from: main.address,                                                  // set expected sender for transaction we want to test matcher properties from
        success: true                                                        // set the desirable result using matcher property success
    });

    printTransactionFees(res.transactions);                                  // print table with details on spent fees
});

Test a transaction with matcher

The basic workflow of creating a test is:

  1. Create a specific wrapped Contract entity using blockchain.openContract().
  2. Describe the actions your Contract should perform and save the execution result in res variable.
  3. Verify the properties using the expect() function and the matcher toHaveTransaction().

The toHaveTransaction matcher expects an object with any combination of fields from the FlatTransaction type defined with the following properties

Name Type Description
from Address? Contract address of the message sender
to Address Contract address of the message destination
on Address Contract address of the message destination (Alternative name of the property to).
value bigint? Amount of Toncoins in the message in nanotons
body Cell Message body defined as a Cell
inMessageBounced boolean? Boolean flag Bounced. True - message is bounced, False - message is not bounced.
inMessageBounceable boolean? Boolean flag Bounceable. True - message can be bounced, False - message can not be bounced.
op number? Op code is the operation identifier number (crc32 from TL-B usually). Expected in the first 32 bits of a message body.
initData Cell? InitData Cell. Used for contract deployment processes.
initCode Cell? initCode Cell. Used for contract deployment processes.
deploy boolean Custom Sandbox flag that indicates whether the contract was deployed during this transaction. True if contract before this transaction was not initialized and after this transaction became initialized. Otherwise - False.
lt bigint Logical time (set by validators in a normal network, monotonically increases by a set interval in Sandbox). Used for defining order of transactions related to a certain contract
now bigint Unix timestamp of the transaction
outMessagesCount number Quantity of outbound messages in a certain transaction
oldStatus AccountStatus AccountStatus before transaction execution
endStatus AccountStatus AccountStatus after transaction execution
totalFees bigint? Number of spent fees in nanotons
aborted boolean? True - execution of certain transaction aborted and rollbacked because of errors or insufficient gas. Otherwise - False.
destroyed boolean? True - if the existing contract was destroyed due to executing a certain transaction. Otherwise - False.
exitCode number? TVM exit code (from compute phase)
actionResultCode number? Action phase result code
success boolean? Custom Sandbox flag that defines the resulting status of a certain transaction. True - if both the compute and the action phase succeeded. Otherwise - False.

You can omit those that you're not interested in, and you can also pass in functions accepting those types returning booleans (true meaning good) to check for example number ranges, message opcodes, etc. Note however that if a field is optional (like from?: Address), then the function needs to accept the optional type, too.

Here is an excerpt of how it's used in the NFT collection example mentioned above:

const buyResult = await buyer.send({
    to: sale.address,
    value: price + toNano('1'),
    sendMode: SendMode.PAY_GAS_SEPARATELY,
})

expect(buyResult.transactions).toHaveTransaction({
    from: sale.address,
    to: marketplace.address,
    value: fee,
})
expect(buyResult.transactions).toHaveTransaction({
    from: sale.address,
    to: collection.address,
    value: fee,
})

(in that example jest is used)

Testing transaction fees

It is possible to configure and update the current time of the Blockchain, which allows one to inspect how much a contract would spend on storage fees.

Suppose we have a main instance defined as a wrapped Contract instance main = blockchain.openContract(/* non-wrapped Main instance */), and we wish to determine the amount of storage fees that will be accrued between two actions within a specified period.

it('should storage fees cost less than 1 TON', async () => {
    const time1 = Math.floor(Date.now() / 1000);                               // current local unix time
    const time2 = time1 + 365 * 24 * 60 * 60;                                  // offset for a year

    blockchain.now = time1;                                                    // set current time
    const res1 = await main.sendMessage(sender.getSender(), toNano('0.05'));   // preview of fees 
    printTransactionFees(res1.transactions);

    blockchain.now = time2;                                                    // set current time
    const res2 = await main.sendMessage(sender.getSender(), toNano('0.05'));   // preview of fees 
    printTransactionFees(res2.transactions);
    
    const tx2 = res2.transactions[1];                                          // extract the transaction that executed in a year
    if (tx2.description.type !== 'generic') {
        throw new Error('Generic transaction expected');
    }

    // Check that the storagePhase fees are less than 1 TON over the course of a year
    expect(tx2.description.storagePhase?.storageFeesCollected).toBeLessThanOrEqual(toNano('1'));   
});

Cross contract tests

The Sandbox emulates the entire process of executing cross-contract interactions as if they occurred on a real blockchain. The result of sending a message (transfer) contains basic information about all transactions and actions. You can verify all of these by creating specific requirements via expect() for each action and transaction.

res = await main.sendMessage(...);

expect(res).toHaveTransaction(...) // test case 
        <...>
expect(res).toHaveTransaction(...) // test case

For instance, with Modern Jetton it's possible to test whether a mint message results in minting to a new jetton wallet contract and returns the excess to the minter contract.

it('minter admin should be able to mint jettons', async () => {
    // can mint from deployer
    let initialTotalSupply = await jettonMinter.getTotalSupply();
    const deployerJettonWallet = await userWallet(deployer.address);
    let initialJettonBalance = toNano('1000.23');
    const mintResult = await jettonMinter.sendMint(deployer.getSender(), deployer.address, initialJettonBalance, toNano('0.05'), toNano('1'));

    expect(mintResult.transactions).toHaveTransaction({ // test transaction of deployment of a jetton wallet
        from: jettonMinter.address,
        to: deployerJettonWallet.address,
        deploy: true,
    });

    expect(mintResult.transactions).toHaveTransaction({ // test transaction of excesses returned to minter
        from: deployerJettonWallet.address,
        to: jettonMinter.address
    });

});

Test Examples

You can typically find various tests for Sandbox-based project contracts in the ./tests directory. Learn more from examples:

Viewing logs

Blockchain and SmartContract use LogsVerbosity to determine what kinds of logs to print. Here is the definition:

type LogsVerbosity = {
    print: boolean
    blockchainLogs: boolean
    vmLogs: Verbosity
    debugLogs: boolean
}

type Verbosity = 'none' | 'vm_logs' | 'vm_logs_full'

Setting verbosity on SmartContracts works like an override with respect to what is set on Blockchain.

debugLogs is enabled by default on the Blockchain instance (so every SmartContract that does not have debugLogs overridden will print debug logs), other kinds of logs are turned off.

print determines whether to console.log all the non-empty logs (if set to false, logs will be collected but will only be exposed in the return values of methods on Blockchain and SmartContract, and not printed to console), defaults to true on the Blockchain instance.

'vm_logs' prints the log of every instruction that was executed, 'vm_logs_full' also includes code cell hashes, locations, and stack information for every instruction executed.

To override verbosity on a specific contract, use await blockchain.setVerbosityForAddress(targetAddress, verbosity), for example:

await blockchain.setVerbosityForAddress(targetAddress, {
    blockchainLogs: true,
    vmLogs: 'vm_logs',
})

After that, the target contract will be using debugLogs from the Blockchain instance to determine whether to print debug logs, but will always print VM logs and blockchain logs.

To set global verbosity, use the blockchain.verbosity setter, for example:

blockchain.verbosity = {
    blockchainLogs: true,
    vmLogs: 'none',
    debugLogs: false,
}

Note that unlike with setVerbosityForAddress, with this setter you have to specify all the values from LogsVerbosity.

Setting smart contract state directly

If you want to test some behavior on a contract if it had specific code, data, and other state fields, but do not want to execute all the required transactions for that, you can directly set the full state of the contract as it is stored in sandbox by using this method on the Blockchain instance:

async setShardAccount(address: Address, account: ShardAccount)

There are 2 helpers exported from sandbox that can help you create the ShardAccount from the common properties: createEmptyShardAccount and createShardAccount.

Note that this is a low-level function and does not check any invariants, such as that the address passed as the argument matches the one that is present in the ShardAccount, meaning it is possible to break stuff if you're not careful when using it.

Using snapshots

It is possible to store the whole Blockchain state in an object and restore this state later. This can be useful to compare the outcomes of different actions after a certain point, or to store the state of the contract system after a long series of configuration actions in order to quickly restore it for all required tests instead of setting it up each time.

To store the state, do the following:

const snapshot = blockchain.snapshot()

To restore the state, do the following:

await blockchain.loadFrom(snapshot)

Note: snapshots store the entire state of a Blockchain instance, that includes:

  • all contracts' states
  • the network config
  • next transaction lt
  • the unix timestamp (if it is set)
  • verbosity settings
  • the libraries dictionary
  • other internal parameters

Basically, the state of a Blockchain instance after it is restored using a snapshot is the same as if the same actions were performed on that instance as on the instance from which the snapshot originates.

Performing testing on contracts from a real network

It is possible to use Sandbox to perform tests on contracts that are deployed to a real network. To do that, create your Blockchain instance using a RemoteBlockchainStorage, like so:

import { TonClient4 } from '@ton/ton'
import { Blockchain, RemoteBlockchainStorage, wrapTonClient4ForRemote } from '@ton/sandbox'
import { getHttpV4Endpoint } from '@orbs-network/ton-access'
const blockchain = await Blockchain.create({
    storage: new RemoteBlockchainStorage(wrapTonClient4ForRemote(new TonClient4({
        endpoint: await getHttpV4Endpoint({
            network: 'mainnet'
        })
    })))
})

After that, whenever that Blockchain instance tries to read the state of an unknown contract, that contract's state will be pulled from that network. RemoteBlockchainStorage also accepts an optional second argument in its constructor, blockSeqno, and if it is passed, the contracts' states will be pulled from that block number, instead of from the latest known block.

Note: only the states of unknown (do not confuse unknown with uninitialized) contracts will be pulled from the network - that is, if a contract's state has been previously set by any means (creation of a treasury, set manually, or was already pulled before), then it will not be re-read.

Step-by-step execution

In cases where you need to process a few transactions from the transaction chain, but not all of them (for example, a contract generates 1000 transactions but you only need to check the first 10 - in that case, waiting for the whole 1000 transactions to be executed is wasteful), you may do so by using the sendMessageIter method:

const iter = await blockchain.sendMessageIter(testMessage)

for await (const tx of iter) {
    // some kind of processing for tx, for example:
    console.log(tx)
}

This approach allows you to stop the processing of the transaction chain, unlike the usual approaches.

Network/Block configuration

By default, this package will use its stored network configuration to emulate messages. However, you can set any configuration you want when creating the Blockchain instance by passing the configuration cell in the optional params argument in the config field.

Contributors

Special thanks to @dungeon-master-666 for their C++ code of the emulator.

Special thanks to @TrueCarry for their help with performance and other suggestions.

License

This package is released under the MIT License.

Donations

TON - EQAQR1d1Q4NaE5EefwUMdrr1QvXg-8mDB0XI2-fwDBD0nYxC