konnected-io/konnected-security

Issues

• MQTT support?

  #99 opened 4 years ago by podarok
  11

• Unprotected crash/panic when REST endpoint responds with 401

  #175 opened 2 years ago by heythisisnate
  0

• Enhance time server settings

  #171 opened 2 years ago by heythisisnate
  4

• OTA update may fail while connected to AWS IoT

  #170 opened 2 years ago by sadahsan
  10

• Firmware v3.0.1 no longer polling DS18B20 & reporting temp

  #159 opened 2 years ago by andrewconnell
  5

• No Boot issue when Auxiliary Devices Connected

  #135 opened 2 years ago by blueknight768
  2

• Temperature spikes with ds18b20 using konnected-temperature-probe-ds18b20.groovy

  #133 opened 2 years ago by sapman1208
  1

• Enhancement: Improved discovery

  #107 opened 2 years ago by iamandymcinnes
  1

• Enhancement: Manual Add IP and Port

  #116 opened 2 years ago by satellite-no
  1

• API Enhancement: zone instead of pin identifiers

  #165 opened 2 years ago by heythisisnate
  0

• Wifi drops w/ reason code 15

  #163 opened 2 years ago by mightymos
  6

• You need to swap your example arguments, they are backwards ...

  #126 opened 2 years ago by fcassirer
  0

• Boot once and no boot on hard reset ... then boot again ?!?!?!

  #136 opened 2 years ago by done7k
  1

• On HA restart, state changes to "off" on sensors instead of "unavailable"

  #138 opened 2 years ago by BigHomie90
  1

• Push notification (HomeKit) when the system has been triggered, but before the Alarm is activated?

  #162 opened 2 years ago by peterrakolcza
  1

• Usage of GPIO16/D0

  #160 opened 3 years ago by AddoSolutions
  1

• Unable to update firmware on 1st panel of Alarm V2 - keeps saying connecting

  #158 opened 3 years ago by SeanHama
  5

• Release 3.0.0 - Alarm Pro v2 - How do we perform a OTA upgrade of the firmware?

  #157 opened 3 years ago by SeanHama
  1

• Konnected Alarm Panel Reboots every 24 hours when a zone with Type: Switch is steady on for 24 hours

  #155 opened 3 years ago by joshlarsen48
  2

• State of Zone Type: Switch is lost at reboot

  #156 opened 3 years ago by joshlarsen48
  6

• Konnected hardware support WP2 Personal (AES) or WPA3 authentication?

  #147 opened 3 years ago by Korte68
  1

• Konnected security

  #145 opened 3 years ago by richardlong30
  1

• Lua panic when provisioning with a temperature sensor on 3.0

  #153 opened 3 years ago by heythisisnate
  0

• Add random delay to SSDP response

  #113 opened 3 years ago by brianegge
  0

• certificate issue with Home Assistant using LetsEncrypt

  #152 opened 3 years ago by heythisisnate
  1

• Enhancement: Independently trigger output on state change

  #151 opened 3 years ago by Bostwickenator
  11

• Board cannot reach Home Assistant. No zone update. Looping 10 times and reboots.

  #150 opened 3 years ago by done7k
  2

• Konnected will continuously reboot if the network if offline, which makes it pointless to ever buy a Battery Backup.

  #149 opened 3 years ago by trooperthorn
  1

• ALARM1 e ALARM2 set to LOW when ON

  #148 opened 3 years ago by errecla
  3

• OTA upgrade not working

  #129 opened 4 years ago by Korte68
  4

• Failure to save output state(s) on reboot

  #132 opened 4 years ago by ceandraka
  6

• SmartThings showing konnected PIR as incorrect type "placeholder"

  #134 opened 4 years ago by daltskin
  1

• NodeMCU - No wifi after flashing

  #127 opened 4 years ago by mshuflin
  3

• Traffic jam in case of several parallel operation

  #130 opened 5 years ago by Korte68
  0

• RX PIN

  #122 opened 5 years ago by BigHomie90
  0

• Relay triggers every time board reboots.

  #117 opened 5 years ago by qu3bec
  13

• Constant blue light on board after upgrading to 2.3.3

  #124 opened 5 years ago by qu3bec
  2

• hassio Konnected port

  #121 opened 5 years ago by weswark
  3

• is there a "standalone" rest API?

  #119 opened 5 years ago by yeahman45
  3

• Outbound connection to 23.129.64.159?

  #114 opened 5 years ago by qu3bec
  11

• v2.3.0 boot freeze on NTP sync failure

  #105 opened 5 years ago by LouPaloma
  11

• Konnected Interface: SmartThings latency

  #98 opened 5 years ago by daltskin
  5

• Build fails with nodemcu 3.0

  #109 opened 5 years ago by greghaynes
  1

• Support non-discovery based homeassistant setup

  #111 opened 5 years ago by greghaynes
  2

• 2.3.1 Release files reference 2.3.0 konnected-firmware-2-3-0.bin

  #108 opened 5 years ago by iamandymcinnes
  1

• Panic unprotected error in call to Lua API (/opt/lua/application:lua:45: bad argument #1 to ‘alarm’ (Range: 1-6870947)

  #102 opened 5 years ago by qu3bec
  1

• Konnected Security Sensor no longer updates state in Homeassistant after updating to 2.2.7 release

  #100 opened 5 years ago by slonkar
  1

• cannot open zip

  #97 opened 5 years ago by 7161snedigar
  0

• cannot open zip

  #96 opened 5 years ago by 7161snedigar
  0

• Error when trying to turn off Siren

  #95 opened 5 years ago by viperk1
  1