koraykzly/alpha250-led-blinker

Simple led blinker program for Koheron Alpha250

Koheron Alpha250 - Led Blinker

This is a simple led blinker program for Koheron Alpha250 board. You can find more information from

• Alpha250
• Koheron Software Development Kit

Description

Alpha250 has 8 user LEDs and these can be controlled by gpio expander. I2C bus address of gpio expander is 0b01000000, LEDs are connected to output port 1. This program basically writes and reads this address via C++ driver and is managed by a simple web interface and Python.

This example very similar to example/red-pitaya/led-blinker in koheron-sdk.

How to run

1. Setup koheron-sdk, if you haven't.

2. Open a folder named instruments in sdk and clone the repository inside.

3. Run the command from sdk with IP address you use for the board.

   $ make CONFIG=instruments/alpha250-led-blinker/config.yml HOST=192.168.1.2 run