ewpe-smart-mqtt

MQTT bridge for EWPE Smart powered devices which can be controled via WiFi using EWPE Smart app

This project became possible thanks to great work of reverse engineering the original app protocol in gree-remote project

Prerequisites

Setup and run MQTT server (mosquitto is the easiest one)

Installation

Clone or download this repository

git clone https://github.com/stas-demydiuk/ewpe-smart-mqtt

Install dependencies

npm install

Make initial configuration by setting enviromental variables

Variable	Description	Default value
MQTT_SERVER	MQTT server URI	mqtt://127.0.0.1
MQTT_BASE_TOPIC	Base MQTT topic for bridge messages	ewpe-smart
NETWORK	Network adress to scan devices	192.168.1.255
DEVICE_POLL_INTERVAL	Interval (ms) to poll device status	5000

Run the bridge

npm start

Installation (Docker)

docker run -it \
    --network="host" \
    -e "MQTT_SERVER=mqtt://127.0.0.1" \
    -e "MQTT_BASE_TOPIC=ewpe-smart" \
    -e "NETWORK=192.168.1.255" \
    -e "DEVICE_POLL_INTERVAL=5000" \
    --name gree-smart-mqtt \
    demydiuk/gree-smart-mqtt:latest

Communicating with the bridge

Publish to ewpe-smart/devices/list to receive list of registered devices
Publish to ewpe-smart/{deviceId}/get to receive status of {deviceId}
Publish to ewpe-smart/{deviceId}/set to set status of {deviceId}, payload should be json object with key/values pairs to set, i.e:

ewpe-smart/{deviceId}/set {"Pow": 1, "SetTem": 24}

Supported devices

All devices which can be controlled via EWPE Smart app should be supported, including: