TouchGFXDemo
I try to run TouchGFX on Nucleo-F412ZG + SPI LCD(https://www.amazon.co.jp/dp/B072N551V3) + QSPI FLASH(https://ja.aliexpress.com/item/33035168600.html). I'm already a success it. SPI LCD is ILI9341+XPT2048. QSPI FLASH is W25Q128JV.
For SPI LCD is as;
- SPILCDTest (For F446)
- SPILCDTestFPS (For F446)
- SPILCDTestXY (For F446)
- SPILCDTestFPS412 (For F412)
For SPI TC is as;
- TouchTest (For F446)
- TouchTestHW (For F446)
- TouchTestHW412 (For F412)
For Combination test is as;
- DrawingTest (For F412)
For small GUI by TouchGFX test as;
- GUITestNoOS (For F412) https://youtu.be/tz8haqRtUfs
For QSPI test as;
- QSPI test (For F412)
For big GUI by TouchGFX as;
- TouchGFXDemo (For F412) https://youtu.be/MUmIVOVB6cI
Hardware Connection
| Pinname | Function |
|---|---|
| PC6 | DC |
| PB8 | LED |
| PB15 | RESET |
| PA5 | LCD SCK |
| PA6 | LCD MISO |
| PA7 | LCD MOSI |
| PD14 | LCD CS |
| PB5 | TS MOSI |
| PB3 | TS SCK |
| PB4 | TS MISO |
| PE9 | TS CS |
| PE13 | TS IRQ |
| PD12 | QSPI IO1 |
| PD11 | QSPI IO0 |
| PB2 | QSPI CLK |
| PB6 | QSPI CS |
| PE2 | QSPI IO2 |
| PD13 | QSPI IO3 |
Related project
*.stldr for flash W25Q128JV.