kp-bit/xblinds

Issues

• Problem with mqtt

  #39 opened 9 months ago by szwarx
  1

• not an Issue but an Idea

  #38 opened a year ago by raphhorn
  2

• Hardware Hack - more powerful 28BYJ-48 - necessary code modification

  #20 opened 4 years ago by spitzlbergerj
  3

• MQTT HA Problem

  #37 opened a year ago by raphhorn
  13

• Support for ESP32 wifi board

  #36 opened a year ago by mreguly
  1

• Release 1.0 gets stuck obtain IP Address

  #35 opened 2 years ago by elmangi
  2

• Publish original files for CAD

  #34 opened 2 years ago by peteh
  1

• Add license

  #32 opened 3 years ago by savikko
  1

• Suggestion: MQTT in JSON and/or implement Home Assistant Auto-Discovery

  #31 opened 3 years ago by Electr1fying
  5

• Suggestion: change the behavior of adjustment

  #30 opened 3 years ago by Electr1fying
  2

• Suggestion: Ability to adjust (max) RPM

  #29 opened 3 years ago by Electr1fying
  1

• Xblinds gets disconnected and does not update MQTT status

  #28 opened 3 years ago by denniskoenders
  2

• Can't connect to wifi network

  #27 opened 3 years ago by mitchcecg
  12

• MQTT status in detail

  #26 opened 3 years ago by LeoVe
  2

• code request

  #25 opened 4 years ago by Zeverox
  2

• Shematic and Powersuply connection for 3 units

  #23 opened 4 years ago by mikeo999
  4

• MQTT closes on command then opens straight away

  #24 opened 4 years ago by BadgerJed
  1

• ESP8266 lässt sich anpingen, Website nicht erreichbar.

  #22 opened 4 years ago by guber-a
  2

• More torque

  #21 opened 4 years ago by lexucd
  5

• Can't go from closed to half

  #19 opened 4 years ago by Smallinger
  2

• Settings surviving reboot

  #18 opened 4 years ago by IndeterminateName
  5

• Cannot connect xblinds to home wifi.

  #9 opened 4 years ago by maciak
  5

• Stronger Motor

  #17 opened 4 years ago by cima37
  1

• Suggestion: use power supply from D1 Mini USB port?

  #13 opened 4 years ago by MagaliDB
  9

• More info on MQTT connection?

  #14 opened 4 years ago by lexucd
  3

• Status topic should respond with "opening" or "closing" when blinds are opening or closing

  #12 opened 4 years ago by arthurkok2
  2

• The blue LED on the D1 is always on

  #10 opened 4 years ago by arthurkok2
  2

• Any recommendations for a more powerful motor

  #8 opened 4 years ago by 1-ben-1
  1

• about HomeKit integration

  #7 opened 4 years ago by gorkemsert
  1

• motor skips

  #6 opened 4 years ago by sdebije
  3

• IS it just me or code is not in the project anymore ?

  #5 opened 4 years ago by patatofour
  1

• [bug?] power consuming/stepper warm up over time

  #4 opened 4 years ago by m00x-pixel
  2

• [Feature request or something?] Auto detect end

  #3 opened 4 years ago by jellewie
  1

• Source Code

  #2 opened 4 years ago by TheDiscript
  1

• Design Files

  #1 opened 4 years ago by vincentscode
  1