kriswiner/BNO055

Issues

• Some problems with software yaw angle

  #14 opened 6 months ago by brightproject
  5

• nier teensy problem

  #13 opened 3 years ago by benwadub
  0

• Existing Library for the BNO055

  #8 opened 7 years ago by jr2629
  11

• BNO055 hardware fusion is wrong at low angular speed

  #12 opened 6 years ago by schadocalex
  4

• Does it need to do mag calibration every time power is up?

  #3 opened 9 years ago by howardmah
  6

• I2C_MASTER not declared in the scope

  #7 opened 8 years ago by shreyamantu
  2

• BNO055 and MPU9250 "Roll" indication is correct in static position, wrong when moving.

  #11 opened 6 years ago by Vliegvogeltla
  4

• Teensy 3.6?

  #10 opened 6 years ago by abdoh747
  13

• BNO055 ODR & Read times

  #4 opened 9 years ago by abelsm2
  15

• Clarifications on BNO055 and its calibration.

  #9 opened 7 years ago by mrrobles09
  8

• Software Yaw not tracking Hardware yaw

  #6 opened 8 years ago by duckman01
  7

• No I2C devices found!!

  #5 opened 9 years ago by mohit5037
  9

• No I2C devices found

  #2 opened 9 years ago by howardmah
  1

• BNO-055 vs BMX-055 recommendation?

  #1 opened 10 years ago by joseangeljimenez
  2