Automatic sleep mode?
Opened this issue · 3 comments
bilbo69 commented
Hi Kris,
I've loaded into the Ladybug the firmware BlinkLadybug.
Then the firmware starts.
It works (red led blinks), but after 5 minutes seems to stop (red led off).
Then if I open the com port on the PC the firmware seems to restart and with com port opened doesn't stop after 5 min.
Seems that, without com port opened, there's an automatic sleep mode after 5 mins.
It's correct?
How can I disable it?
Thank's
Gianluca Isernia
kriswiner commented
Serial.begin(38400);
Serial. blockOnOverrun(false);
…On Thu, Aug 1, 2019 at 8:56 AM bilbo69 ***@***.***> wrote:
Hi Kris,
I've loaded into the Ladybug the firmware BlinkLadybug.
Then the firmware starts.
It works (red led blinks), but after 5 minutes seems to stop (red led off).
Then if I open the com port on the PC the firmware seems to restart for
other 5 min.
Seems that there's an automatic sleep mode after 5 mins.
It's correct?
How can I disable it?
Thank's
Gianluca Isernia
—
You are receiving this because you are subscribed to this thread.
Reply to this email directly, view it on GitHub
<#4?email_source=notifications&email_token=ABTDLKRLG5GCZXPYF4ETGY3QCMBULA5CNFSM4IISEV4KYY3PNVWWK3TUL52HS4DFUVEXG43VMWVGG33NNVSW45C7NFSM4HC3SKFA>,
or mute the thread
<https://github.com/notifications/unsubscribe-auth/ABTDLKWLAQ4VN5I3QEMNI43QCMBULANCNFSM4IISEV4A>
.
bilbo69 commented
Hi Kris,
I'm working on Dragonfly board and IIS3DWB accelerometer.
In particular the example *IIS3DWB_FFT_Dragonfly.v03*.
I can't understand a thing:
once FIFO mode is enabled, at what sampling rate are acceleration samples
read?
In my application, for example, I would have to sample the three
accelerations at 5 KHz.
Thank you!
Best regards
Gianluca
Il giorno gio 1 ago 2019 alle ore 18:03 Kris Winer ***@***.***>
ha scritto:
… Serial.begin(38400);
Serial. blockOnOverrun(false);
On Thu, Aug 1, 2019 at 8:56 AM bilbo69 ***@***.***> wrote:
> Hi Kris,
> I've loaded into the Ladybug the firmware BlinkLadybug.
> Then the firmware starts.
> It works (red led blinks), but after 5 minutes seems to stop (red led
off).
>
> Then if I open the com port on the PC the firmware seems to restart for
> other 5 min.
> Seems that there's an automatic sleep mode after 5 mins.
> It's correct?
> How can I disable it?
>
> Thank's
> Gianluca Isernia
>
> —
> You are receiving this because you are subscribed to this thread.
> Reply to this email directly, view it on GitHub
> <
#4?email_source=notifications&email_token=ABTDLKRLG5GCZXPYF4ETGY3QCMBULA5CNFSM4IISEV4KYY3PNVWWK3TUL52HS4DFUVEXG43VMWVGG33NNVSW45C7NFSM4HC3SKFA
>,
> or mute the thread
> <
https://github.com/notifications/unsubscribe-auth/ABTDLKWLAQ4VN5I3QEMNI43QCMBULANCNFSM4IISEV4A
>
> .
>
—
You are receiving this because you authored the thread.
Reply to this email directly, view it on GitHub
<#4?email_source=notifications&email_token=AK6YRJZ5XDGAPZ7MS2ZBGN3QCMCLZA5CNFSM4IISEV4KYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOD3LCRJI#issuecomment-517351589>,
or mute the thread
<https://github.com/notifications/unsubscribe-auth/AK6YRJ7GPCXQ7KREKCEM7B3QCMCLZANCNFSM4IISEV4A>
.
kriswiner commented
The IIS3DWB sampling rate is 26700 Hz, flat-response bandwidth is 6300 Hz..
Please take a look at the data sheet.
…On Fri, Jul 16, 2021 at 6:38 AM bilbo69 ***@***.***> wrote:
Hi Kris,
I'm working on Dragonfly board and IIS3DWB accelerometer.
In particular the example *IIS3DWB_FFT_Dragonfly.v03*.
I can't understand a thing:
once FIFO mode is enabled, at what sampling rate are acceleration samples
read?
In my application, for example, I would have to sample the three
accelerations at 5 KHz.
Thank you!
Best regards
Gianluca
Il giorno gio 1 ago 2019 alle ore 18:03 Kris Winer ***@***.***>
ha scritto:
> Serial.begin(38400);
> Serial. blockOnOverrun(false);
>
> On Thu, Aug 1, 2019 at 8:56 AM bilbo69 ***@***.***> wrote:
>
> > Hi Kris,
> > I've loaded into the Ladybug the firmware BlinkLadybug.
> > Then the firmware starts.
> > It works (red led blinks), but after 5 minutes seems to stop (red led
> off).
> >
> > Then if I open the com port on the PC the firmware seems to restart for
> > other 5 min.
> > Seems that there's an automatic sleep mode after 5 mins.
> > It's correct?
> > How can I disable it?
> >
> > Thank's
> > Gianluca Isernia
> >
> > —
> > You are receiving this because you are subscribed to this thread.
> > Reply to this email directly, view it on GitHub
> > <
>
#4?email_source=notifications&email_token=ABTDLKRLG5GCZXPYF4ETGY3QCMBULA5CNFSM4IISEV4KYY3PNVWWK3TUL52HS4DFUVEXG43VMWVGG33NNVSW45C7NFSM4HC3SKFA
> >,
> > or mute the thread
> > <
>
https://github.com/notifications/unsubscribe-auth/ABTDLKWLAQ4VN5I3QEMNI43QCMBULANCNFSM4IISEV4A
> >
> > .
> >
>
> —
> You are receiving this because you authored the thread.
> Reply to this email directly, view it on GitHub
> <
#4?email_source=notifications&email_token=AK6YRJZ5XDGAPZ7MS2ZBGN3QCMCLZA5CNFSM4IISEV4KYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOD3LCRJI#issuecomment-517351589
>,
> or mute the thread
> <
https://github.com/notifications/unsubscribe-auth/AK6YRJ7GPCXQ7KREKCEM7B3QCMCLZANCNFSM4IISEV4A
>
> .
>
—
You are receiving this because you commented.
Reply to this email directly, view it on GitHub
<#4 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/ABTDLKWA4VF2ULDY26G54CDTYAY4DANCNFSM4IISEV4A>
.