Specified folder/zip file does not contain a valid library
lagunacomputer opened this issue · 5 comments
lagunacomputer commented
hey can i just include the .c files in my sketch if I get this error in arduino IDE 1.8.2 ?
Sketch -> Include Library -> Add .zip library =
Specified folder/zip file does not contain a valid library
Invalid library found in M:\DropBox\Arduino\libraries\SensorTile-master: M:\DropBox\Arduino\libraries\SensorTile-master
Invalid library found in M:\DropBox\Arduino\libraries\SensorTile-master: M:\DropBox\Arduino\libraries\SensorTile-master
thank you sir
kriswiner commented
There should be .h and .cpp files that can be added directly as additonal
files in the IDE.
From where are you getting Sensor Tile libraries?
…On Thu, Aug 31, 2017 at 11:29 AM, lagunacomputer ***@***.***> wrote:
hey can i just include the .c files in my sketch if I get this error in
arduino IDE 1.8.2 ?
Sketch -> Include Library -> Add .zip library =
Specified folder/zip file does not contain a valid library
Invalid library found in M:\DropBox\Arduino\libraries\SensorTile-master:
M:\DropBox\Arduino\libraries\SensorTile-master
Invalid library found in M:\DropBox\Arduino\libraries\SensorTile-master:
M:\DropBox\Arduino\libraries\SensorTile-master
thank you sir
—
You are receiving this because you are subscribed to this thread.
Reply to this email directly, view it on GitHub
<#2>, or mute the thread
<https://github.com/notifications/unsubscribe-auth/AGY1qpZ1ze70g-h3WowXZhaCV0wsrahaks5sdvuWgaJpZM4PJOw6>
.
lagunacomputer commented
ok great, thanks.
i found it here and downloaded the .zip :
https://github.com/kriswiner/SensorTile
On Thu, Aug 31, 2017 at 11:36 AM, Kris Winer <notifications@github.com>
wrote:
… There should be .h and .cpp files that can be added directly as additonal
files in the IDE.
From where are you getting Sensor Tile libraries?
On Thu, Aug 31, 2017 at 11:29 AM, lagunacomputer ***@***.***
>
wrote:
> hey can i just include the .c files in my sketch if I get this error in
> arduino IDE 1.8.2 ?
>
> Sketch -> Include Library -> Add .zip library =
>
> Specified folder/zip file does not contain a valid library
> Invalid library found in M:\DropBox\Arduino\libraries\SensorTile-master:
> M:\DropBox\Arduino\libraries\SensorTile-master
> Invalid library found in M:\DropBox\Arduino\libraries\SensorTile-master:
> M:\DropBox\Arduino\libraries\SensorTile-master
>
> thank you sir
>
> —
> You are receiving this because you are subscribed to this thread.
> Reply to this email directly, view it on GitHub
> <#2>, or mute the thread
> <https://github.com/notifications/unsubscribe-auth/AGY1qpZ1ze70g-
h3WowXZhaCV0wsrahaks5sdvuWgaJpZM4PJOw6>
> .
>
—
You are receiving this because you authored the thread.
Reply to this email directly, view it on GitHub
<#2 (comment)>,
or mute the thread
<https://github.com/notifications/unsubscribe-auth/ADqL6iATEmfHjYKLw6YcsFxC5-M1JiW5ks5sdv1FgaJpZM4PJOw6>
.
--
Galen Wollenberg
Laguna Computer
949-813-3691
lagunacomputer@gmail.com
lagunacomputer commented
sorry i guess i had assumed the Ladybug was an arduino board, maybe thats
why the library won't import into arduino IDE.
my mistake, thanks sir
On Thu, Aug 31, 2017 at 11:36 AM, Kris Winer <notifications@github.com>
wrote:
… There should be .h and .cpp files that can be added directly as additonal
files in the IDE.
From where are you getting Sensor Tile libraries?
On Thu, Aug 31, 2017 at 11:29 AM, lagunacomputer ***@***.***
>
wrote:
> hey can i just include the .c files in my sketch if I get this error in
> arduino IDE 1.8.2 ?
>
> Sketch -> Include Library -> Add .zip library =
>
> Specified folder/zip file does not contain a valid library
> Invalid library found in M:\DropBox\Arduino\libraries\SensorTile-master:
> M:\DropBox\Arduino\libraries\SensorTile-master
> Invalid library found in M:\DropBox\Arduino\libraries\SensorTile-master:
> M:\DropBox\Arduino\libraries\SensorTile-master
>
> thank you sir
>
> —
> You are receiving this because you are subscribed to this thread.
> Reply to this email directly, view it on GitHub
> <#2>, or mute the thread
> <https://github.com/notifications/unsubscribe-auth/AGY1qpZ1ze70g-
h3WowXZhaCV0wsrahaks5sdvuWgaJpZM4PJOw6>
> .
>
—
You are receiving this because you authored the thread.
Reply to this email directly, view it on GitHub
<#2 (comment)>,
or mute the thread
<https://github.com/notifications/unsubscribe-auth/ADqL6iATEmfHjYKLw6YcsFxC5-M1JiW5ks5sdv1FgaJpZM4PJOw6>
.
--
Galen Wollenberg
Laguna Computer
949-813-3691
lagunacomputer@gmail.com
kriswiner commented
Ladybug is an Arduino board, you have to add this Arduino core:
https://github.com/GrumpyOldPizza/arduino-STM32L4
On Thu, Aug 31, 2017 at 11:41 AM, lagunacomputer <notifications@github.com>
wrote:
… sorry i guess i had assumed the Ladybug was an arduino board, maybe thats
why the library won't import into arduino IDE.
my mistake, thanks sir
On Thu, Aug 31, 2017 at 11:36 AM, Kris Winer ***@***.***>
wrote:
> There should be .h and .cpp files that can be added directly as additonal
> files in the IDE.
>
> From where are you getting Sensor Tile libraries?
>
> On Thu, Aug 31, 2017 at 11:29 AM, lagunacomputer <
***@***.***
> >
> wrote:
>
> > hey can i just include the .c files in my sketch if I get this error in
> > arduino IDE 1.8.2 ?
> >
> > Sketch -> Include Library -> Add .zip library =
> >
> > Specified folder/zip file does not contain a valid library
> > Invalid library found in M:\DropBox\Arduino\libraries\
SensorTile-master:
> > M:\DropBox\Arduino\libraries\SensorTile-master
> > Invalid library found in M:\DropBox\Arduino\libraries\
SensorTile-master:
> > M:\DropBox\Arduino\libraries\SensorTile-master
> >
> > thank you sir
> >
> > —
> > You are receiving this because you are subscribed to this thread.
> > Reply to this email directly, view it on GitHub
> > <#2>, or mute the thread
> > <https://github.com/notifications/unsubscribe-auth/AGY1qpZ1ze70g-
> h3WowXZhaCV0wsrahaks5sdvuWgaJpZM4PJOw6>
> > .
> >
>
> —
> You are receiving this because you authored the thread.
> Reply to this email directly, view it on GitHub
> <#2 (comment)
>,
> or mute the thread
> <https://github.com/notifications/unsubscribe-auth/
ADqL6iATEmfHjYKLw6YcsFxC5-M1JiW5ks5sdv1FgaJpZM4PJOw6>
> .
>
--
Galen Wollenberg
Laguna Computer
949-813-3691 <(949)%20813-3691>
***@***.***
—
You are receiving this because you commented.
Reply to this email directly, view it on GitHub
<#2 (comment)>,
or mute the thread
<https://github.com/notifications/unsubscribe-auth/AGY1qjcVk9686IQ3xHhm3kVefO2jjF4mks5sdv5hgaJpZM4PJOw6>
.
lagunacomputer commented
gotchya, i was confusing 'lillypad' with 'ladybug'. I will try this out on
one of my nucleo l432kc's or one of my L4 or other arm cortex boards from ST
thanks so much for the sensor tile code and library!
On Thu, Aug 31, 2017 at 11:46 AM, Kris Winer <notifications@github.com>
wrote:
… Ladybug is an Arduino board, you have to add this Arduino core:
https://github.com/GrumpyOldPizza/arduino-STM32L4
On Thu, Aug 31, 2017 at 11:41 AM, lagunacomputer ***@***.***
>
wrote:
> sorry i guess i had assumed the Ladybug was an arduino board, maybe thats
> why the library won't import into arduino IDE.
>
> my mistake, thanks sir
>
> On Thu, Aug 31, 2017 at 11:36 AM, Kris Winer ***@***.***>
> wrote:
>
> > There should be .h and .cpp files that can be added directly as
additonal
> > files in the IDE.
> >
> > From where are you getting Sensor Tile libraries?
> >
> > On Thu, Aug 31, 2017 at 11:29 AM, lagunacomputer <
> ***@***.***
> > >
> > wrote:
> >
> > > hey can i just include the .c files in my sketch if I get this error
in
> > > arduino IDE 1.8.2 ?
> > >
> > > Sketch -> Include Library -> Add .zip library =
> > >
> > > Specified folder/zip file does not contain a valid library
> > > Invalid library found in M:\DropBox\Arduino\libraries\
> SensorTile-master:
> > > M:\DropBox\Arduino\libraries\SensorTile-master
> > > Invalid library found in M:\DropBox\Arduino\libraries\
> SensorTile-master:
> > > M:\DropBox\Arduino\libraries\SensorTile-master
> > >
> > > thank you sir
> > >
> > > —
> > > You are receiving this because you are subscribed to this thread.
> > > Reply to this email directly, view it on GitHub
> > > <#2>, or mute the
thread
> > > <https://github.com/notifications/unsubscribe-auth/AGY1qpZ1ze70g-
> > h3WowXZhaCV0wsrahaks5sdvuWgaJpZM4PJOw6>
> > > .
> > >
> >
> > —
> > You are receiving this because you authored the thread.
> > Reply to this email directly, view it on GitHub
> > <#2#
issuecomment-326384676
> >,
> > or mute the thread
> > <https://github.com/notifications/unsubscribe-auth/
> ADqL6iATEmfHjYKLw6YcsFxC5-M1JiW5ks5sdv1FgaJpZM4PJOw6>
> > .
> >
>
>
>
> --
> Galen Wollenberg
> Laguna Computer
> 949-813-3691 <(949)%20813-3691> <(949)%20813-3691>
> ***@***.***
>
> —
> You are receiving this because you commented.
> Reply to this email directly, view it on GitHub
> <#2 (comment)
>,
> or mute the thread
> <https://github.com/notifications/unsubscribe-auth/
AGY1qjcVk9686IQ3xHhm3kVefO2jjF4mks5sdv5hgaJpZM4PJOw6>
> .
>
—
You are receiving this because you authored the thread.
Reply to this email directly, view it on GitHub
<#2 (comment)>,
or mute the thread
<https://github.com/notifications/unsubscribe-auth/ADqL6n4qqMo5PddJ31psE-mneAtBsD7Gks5sdv9xgaJpZM4PJOw6>
.
--
Galen Wollenberg
Laguna Computer
949-813-3691
lagunacomputer@gmail.com