Issues
- 36
unable to send commands to sophos ssh through netmiko due to readtimeout error.
#3362 opened by capmerah - 3
Disconnecting from device takes way too long.
#3436 opened by nikuizzz - 4
Does NEtmiko support Moxa 518E series
#3392 opened by zubairshahzadarain - 10
Netmiko truncates the output of `show datapath session table` on Aruba 7210 AMC/WLCs.
#3435 opened by somenath-sinha - 1
Please consider changing hardcoded poetry version
#3415 opened by dtantsur - 1
handling of "command not found" error in send methods
#3418 opened by shrmk - 1
- 13
- 6
Add A10 SSHDetect : Pattern not detected: 'A10DEVICE\\-Active\\-affinity\\-def\\-vMaster\\[1/1\\]' in output.
#3431 opened by romio28 - 4
Hope to connect to network device locally through jumphost without username and password
#3432 opened by softputer - 0
Nornir netmiko.exceptions.ReadTimeout CISCO IOS
#3433 opened by Abdellah5836 - 2
- 0
MOTD prevents successful login attempts with CISCO
#3424 opened by FriendlyGecko - 1
- 0
Inconsistent execution of script error:paramiko.buffered_pipe.PipeTimeout
#3419 opened by umesh-pathak - 0
issue on gpon isam fx4 model olt nokia
#3416 opened by ashimgiri000 - 2
problem with send_command_timing()
#3412 opened by Stiwar0098 - 0
- 2
auth_timeout on SERIAL ConnectHandler - login authentication appears to happen but NetMikoAuthenticationException is thrown at random
#3410 opened by jmarcedwards - 2
- 3
- 3
Mikrotik version > 6.48 = 'export' command incomplete
#3405 opened by prtomasi - 5
Save config on Maipu switch
#3396 opened by brancott - 0
TPLink Jestream issue with newest version of cryptography
#3404 opened by Stonito - 4
ruckus_fastiron - getting this error for most basic command - TypeError: can only concatenate str (not "NoneType") to str
#3390 opened by TPSreports2020 - 3
Unable to capture full output of a lengthy output
#3399 opened by lasithadks - 2
Improvement for Huawei SmartAX
#3401 opened by evilmonkey19 - 6
- 3
cisco_wlc_ssh unable to connect to WLC "Pattern not detected: '(?:User:|login as|ssword|(?m:[>#]\\s*$))'" error
#3400 opened by stefanopilla - 2
FortiOS with VDOM Admin only netmiko error
#3383 opened by SaneiSaya - 1
netmiko.exceptions.NetmikoTimeoutException: Paramiko: 'No existing session' error: try increasing 'conn_timeout' to 15 seconds or larger.
#3386 opened by SaeedFazlollahzadeh - 3
ConnectHandler don't work for fortimanager
#3389 opened by josecastillagallardo - 1
Linux Ubuntu 22.04.4 LTS, "Pattern not detected: '[\\$\\#]' in output." in version 4.3.0 and above
#3391 opened by Abdellah5836 - 3
- 6
"An error occurred: Socket is closed" but checking with netstat and wireshark the socket remains UP
#3384 opened by Canyata - 0
- 6
fiberstore_fsos authentication failure
#3366 opened by tvphuocjp - 3
BaseConnection.find_prompt() logic appears to be incorrect
#3379 opened by anmcn - 6
- 0
Incompatible ssh peer (no acceptable host key)
#3381 opened by SeasLiV - 3
Netmiko Cisco_Ftd pattern/timeout issue
#3375 opened by jmello-pagseguro - 0
Session log file is empty for fortinet type devices while the remote connection is still active
#3378 opened by cbuons - 4
Juniper junos syntax error in automatic command "set cli screen-width"
#3376 opened by lucasmpampanini - 2
send_config_set Issue
#3374 opened by bmccreary23 - 0
- 0
Mrv ConnectHandler enable passwrd Error
#3368 opened by Workasis - 2
Python SSH network devices
#3354 opened by AhmedMS1 - 1
A10 long command have horizontal scroll, for some models
#3356 opened by LFR65 - 6
Extreme ERS - 4950GTS - CTRL-Y - Netmiko sends only \n to the switch, not CTRL+Y
#3361 opened by SM-InTheHouse - 4
"send_config_from_file" method send commands but errors "Pattern not detected"
#3364 opened by justrob1980