ansible-raspberry-pi

setting up my raspberry pi 3 (RASPBIAN STRETCH LITE） using ansible.

Prerequisite

Install Raspbian Stretch Lite on SD

Insert SD card into USB card reader and connect to your Mac.
Format SD card with SD Card Formatter.
Check your SD card device path.

$ diskutil list
/dev/disk2 (external, physical):
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:     FDisk_partition_scheme                        *32.2 GB    disk2
   1:             Windows_FAT_32 XXX                     32.2 GB    disk2s1

Unmount SD card.

$ sudo diskutil umount /dev/disk2s1

Write Raspbian Image to SD card.

$ sudo dd if=2018-04-18-raspbian-stretch-lite.img of=/dev/rdisk2 bs=1m

SD will be mounted automatically, Enable SSH in advanced.

$ touch /Volumes/boot/ssh

Unmount SD card and eject.

$ sudo diskutil umount /dev/disk2s1

2. Boot your RPi3 and login.

Connect RPi3 to your network.
Boot. While booting, Must check your IP address assigned to RPi3.
SSH RPi3
- User: pi
- Password: raspberry

$ ssh pi@XXX.XXX.XXX.XXX
pi@192.168.0.138's password:
pi@raspberrypi:~ $

3. Set up minimum networking setttings.

IP address

For networking, I prefer physical interface and fixed IP rather than Wi-Fi and DHCP.

$ sudo vi /etc/dhcpcd.conf

~~~~~~~~

interface eth0
static ip_address=192.168.0.10/24
static routers=192.168.0.1
static domain_name_servers=192.168.0.1

Reboot

$ reboot

Usage

$ git clone https://github.com/kun432/ansible-raspberry-pi.git

fix hosts to be suitable for your environment.

$ ansible-playbook -v -i hosts site.yaml --ask-pass -u pi